Product Description Aftermarket 84154316 dipper / crowd cylinder seal kit for Case backhoe loaders and selected crawler dozers or loaders using 5.00 in. bore and 2.50 in. rod hydraulic cylinders. This kit is used to rebuild worn or leaking hydraulic cylinders, helping retain oil pressure, reduce external leakage, and restore...

Product Description The 416-1228 aftermarket tilt cylinder seal kit is referenced for Caterpillar-compatible 992K wheel loader hydraulic cylinder service. It is a standard-size kit intended for a cylinder bore within the applicable nominal service limit; the OEM reference states a maximum 0.25 mm (0.010 in) bore sizing condition. The reference...

Product Description The aftermarket 19000-75899 bucket cylinder seal kit is referenced for selected Takeuchi compact excavator bucket cylinders, including cylinder 19000-75800. It supports hydraulic cylinder rebuilding where external leakage, loss of bucket holding force, or worn sealing surfaces require service. This is a 45 mm rod × 80 mm bore...

Product Description AH218606K is an aftermarket complete seal kit for verified extendable dipperstick cylinders associated with John Deere AH218606 and substitute cylinder AH234004. This cylinder extends and retracts the backhoe dipper, so it is not a loader boom or bucket-cylinder kit. Published references identify a 32 mm rod and 2-1/2...

Product Description AL208001 is an aftermarket hydraulic lift cylinder seal kit reference for selected John Deere agricultural tractors. Official parts data identifies it as a lift cylinder seal kit, and published replacement references associate it with an 85 mm lift-cylinder application. It is used for the tractor hydraulic lift system...

Product Description 160-6386, 9Y-1655, and 8N-7139 are cross-reference numbers for an aftermarket radiator core and end-tank seal used in selected Caterpillar cooling-system assemblies. Made for radiator service work, this EPDM rubber seal reference helps buyers identify the correct component when rebuilding folded-core radiator sections or addressing leakage around radiator tank...

Product Description This aftermarket hydraulic breaker seal kit is for verified Atlas Copco / Epiroc HB3600 and HB3600 DP hydraulic hammer repair applications. HB3600 service parts vary by production serial range, so the breaker serial number is essential before quotation. Epiroc documentation identifies 3363122811 as the seal kit for newer...

Product Description Looking for 464-9563? This aftermarket hydraulic cylinder seal kit is cross-referenced for compatible Caterpillar hydraulic mining shovels. CAT’s public fitment data lists 6015, 6015 FS, 6018, 6018 FS, 6030, 6030 FS, 6040 FS, 6050, 6060, and 6060 FS. Because fitment may change by serial number, cylinder assembly, and...

Product Description AL70934 is an aftermarket replacement steering cylinder gasket kit for selected John Deere agricultural tractors. It is designed for service work on the applicable steering-cylinder assembly, where worn sealing components can contribute to hydraulic-fluid leakage or reduced steering response. This reference is not a lift-cylinder, loader-cylinder, or hydraulic-pump...

Product Description The aftermarket 195-22-05030 service kit is referenced for the transmission control and steering-related service system of verified Komatsu D375A-6 track-type tractors. It should be treated as a control service kit, rather than a hydraulic cylinder repair kit or a full transmission overhaul gasket set. This distinction matters when...

Product Description TH111627 is an aftermarket hydraulic seal kit for the dipper stick/arm cylinder on selected John Deere 892D and 892D LC excavators. Published fitment data identifies a 110 mm rod and 165 mm bore for cylinder references AT131416 and TH111616, prior to serial number 703549. The dipper cylinder controls...

Product Description 308-1838 is an aftermarket hydraulic manifold relief-valve seal kit reference for compatible Caterpillar equipment. Official data identifies O-rings and split back-up rings for servicing the manifold relief valve group. It is a control valve kit, not a hydraulic cylinder, travel motor, or transmission repair kit. The same machine...

Product Description AH225672 is an aftermarket 3/8 in cartridge seal kit reference for selected John Deere combine single-point hydraulic coupler systems. It services the seal cartridge associated with a 3/8 in hydraulic quick-coupler socket, helping maintain a sealed hydraulic connection during header connection, disconnection, and operation. It is not a...

Product Description AH211203K is an aftermarket complete seal kit for rebuilding verified loader boom lift cylinders associated with John Deere AH211203 applications. The shown kit combines rod-end and piston/bore-side sealing components for complete cylinder service. AH211203 is a cylinder reference, not the original seal-kit number; the “K” suffix identifies this...

Product Description 61281-000 is an aftermarket replacement shaft seal kit for selected Danfoss Char-Lynn 4000 Series hydraulic motors with a -006 design level. It is intended for servicing the motor’s shaft-end sealing area when leakage is found around the output shaft. Before ordering, confirm the complete motor model code and...

Product Description The 387-2867 aftermarket solenoid valve seal kit is a reference replacement for selected Caterpillar-compatible powertrain and hydraulic-control applications. Although described as a kit, the OEM reference identifies it as an O-ring sealing item for a solenoid valve; it is not a complete solenoid valve and not a hydraulic...

Product Description Aftermarket 122535A1 swing cylinder seal kit for Case backhoe loader swing cylinder rebuild applications. This kit is used to service one standard hydraulic swing cylinder and helps repair oil leakage, restore sealing performance, and protect the cylinder during swing operation. It is referenced with part numbers 122535A1, 122535A1-A,...

Product Description AH149842 is an aftermarket 80 mm hydraulic-cylinder bore seal kit for selected John Deere equipment. It is an internal piston-side kit: published data lists a four-piece capped T-seal, with no rod seal or wiper. This matters when diagnosing leaks—external rod-end leakage needs a different kit. AH212091 is the...

Product Description AH173410 is an aftermarket 80 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies AH173410 as a hydraulic cylinder piston, rather than a complete rod-and-bore seal kit. It is the piston-side assembly that provides sealing within compatible 80 mm bore cylinders. Published dimensions list a 30.58...

Product Description AH212585 is an aftermarket 110 mm hydraulic-cylinder piston/bore seal kit for John Deere equipment. It is a bore-side kit with a four-piece capped T-seal; data lists no rod seal or wiper. John Deere lists AHC20489 as its substitute bore-seal kit. References place AH212585 in specific backhoe boom, crowd,...

Product Description Aftermarket 6661052 blade cylinder seal kit for Bobcat 231 and X231 mini excavators. It reseals the hydraulic cylinder that extends and retracts to raise, lower and position the front dozer blade during grading, backfilling and machine stabilization. Published aftermarket references specify a 1-3/4 in (44.45 mm) rod and...

Product Description 332/G9281 is an aftermarket replacement bucket cylinder seal kit for selected JCB JS200 and JS220 crawler excavators. It is used to rebuild the hydraulic cylinder that curls and dumps the bucket during digging, loading, and material-handling work. Published replacement-kit data identifies an 85 mm rod and 115 mm...

Product Description 151-1275 is an aftermarket replacement seal kit for selected Danfoss OMP Series 7 orbital hydraulic motors. It is intended for motor service where shaft-end or external sealing components require replacement during repair. This is not a universal OMP or OMR kit: motor generation, complete model code, shaft style,...

Product Description 903/05632 is an aftermarket replacement hydraulic breaker seal kit for JCB Hammermaster 260 Mk2 breakers, including confirmed HM260 and HM260Q references. It is intended for resealing applicable internal breaker positions during overhaul after oil leakage, planned dismantling, or component inspection. It is not a complete breaker, piston, or...