Product Description 991/00018 is an aftermarket replacement slew ram seal kit for selected JCB backhoe loader applications using a 110 mm slew or side-shift cylinder. It is intended to renew applicable rod-end and piston-end sealing positions when the slew ram shows hydraulic leakage, reduced holding performance, or requires planned overhaul....

Product DescriptionVOE11990405 is an aftermarket tilt cylinder seal kit referenced for Volvo L120B wheel loaders. The replacement catalogue associates it with cylinder 11088046, which controls bucket rollback and dumping through the loader linkage. It is a different service reference from the lift kit used to raise the loader arms. Ruijueparts...

Product DescriptionFor a leaking stabilizer on a Volvo BL61B or BL71B backhoe loader, VOE15185168 is an aftermarket cylinder sealing-kit reference to check. Stabilizer cylinders lower and raise the support legs used during backhoe work; their seals should not be confused with the rear boom or bucket kits. Confirm the installed...

Product Description THBB-101 is an aftermarket hydraulic breaker seal kit for a verified TOYO THBB-101 hydraulic hammer. It supports replacement of applicable internal sealing elements during routine maintenance, leakage diagnosis, or breaker overhaul. THBB-101 is commonly associated with a 57 mm tool diameter, but tool size alone cannot confirm the...

Product Description 991/00156 is an aftermarket replacement seal kit for selected JCB track rod or steering ram cylinder applications. JCB identifies the reference as a “Kit-Seal Track Rod,” while aftermarket catalogues commonly describe it as a steering ram seal kit. It is associated with a 75 mm cylinder bore and...

Product DescriptionAH212091 is an aftermarket piston seal kit 80mm supplied by Ruijueparts. John Deere 310G references include boom cylinder AH146874 through serial 926493 and stabilizer AH219500 through 925946; other cylinders use different serial breaks. AH212092 also appears in 80 mm applications, but seal construction and serial coverage differ. Bore size...

Product Description86529541 is an aftermarket o-ring supplied by Ruijueparts. The original CNH reference identifies an O-ring with 32.91 mm inside diameter and 3.53 mm section. Its use must be matched to the specific joint in the parts diagram. Do not infer pressure or temperature ratings for this aftermarket item from...

Product Description25/974637 is an aftermarket sealing kit for a matching JCB hydraulic valve spool. Replacement-parts catalogues identify a valve-spool service set for 3CX and 4CX reference applications. This does not establish compatibility with every valve fitted to those machines: check the valve assembly and the original kit number. Ruijueparts can...

Product Description 172157-99420 is an aftermarket bucket cylinder seal kit matched 1:1 to the original Yanmar repair-kit reference. Verified Yanmar B50-2 and VIO50-1 parts catalogues place this kit in the bucket cylinder assembly, not the arm/dipper cylinder. The associated bucket-cylinder application uses a 50 mm rod and 75 mm bore...

Product Description87428620 is an aftermarket stabilizer cylinder seal kit supplied by Ruijueparts. CASE 590SR Super R Tier 2 references list side-shift stabilizer cylinder 87574187, with a 2 inch rod and 2.75 inch bore. Side-shift and other stabilizer arrangements can differ. Confirm the installed cylinder rather than using a generic backhoe...

Product Description12212209 is an aftermarket rod-side service kit associated with the Liebherr R920 stick cylinder. When preparing an arm-cylinder repair, identify the rod-end components separately from the piston seals so the order matches the work required. Check the original kit number, cylinder identification and machine serial number before purchase. Ruijueparts...

Product Description AH149810 is an aftermarket steering-cylinder seal kit for John Deere backhoe loaders and motor graders. Examples include a 210LE steering cylinder AH216821 and a 570B front-steering cylinder AH150023; the rod reference is 25 mm. On some backhoes, fitment is limited to non-MFWD machines or a specified rod guide:...

Product DescriptionVOE11990050 is an aftermarket steering cylinder seal kit referenced for selected Volvo L90, L90B, L120 and L120B wheel loaders, among other catalogue applications. Steering cylinders articulate the frame, rather than lifting the loader arms or tilting the bucket. Cylinder references and serial ranges vary across these older machines. Ruijueparts...

Product Description Description: 86614021 is an aftermarket hydraulic breaker seal kit reference for the Montabert BRP140 hydraulic breaker. It is intended for breaker maintenance and resealing work when hydraulic leakage, pressure loss, or worn sealing elements require service. This is a replacement part, not a complete breaker assembly. Confirm the...

Product Description The aftermarket 19001-13099 bucket cylinder seal kit is referenced for the Takeuchi TB260 compact excavator bucket cylinder 19001-13000. It supports hydraulic cylinder rebuilding when rod-end leakage, piston-side bypass, or worn sealing elements require attention. Published data identifies a 50 mm rod × 80 mm bore application. For accurate...

Product DescriptionVOE15173332 is an aftermarket hydraulic cylinder seal kit referenced across selected Volvo BL-series backhoe loaders. These machines have several front-loader and backhoe cylinders, so the model family does not establish the repair position by itself. Match the installed cylinder and original kit reference before adding the item to a...

Product Description AHC16954 is an aftermarket 50 mm hydraulic cylinder rod seal kit reference for John Deere equipment. It services the rod and gland end, not the piston-side bore. A published 772G/GP grader guide lists it for articulation, wheel-lean, blade-lift, blade-tilt, and circle-side-shift cylinders. As one kit may serve different...

Product Description991/10147 is an aftermarket hydraulic cylinder sealing kit identified by its complete JCB reference. The available kit catalogues confirm the cylinder-seal category but do not establish a specific machine model or cylinder position for this offer. Use the original kit number and installed cylinder identification before ordering. Ruijueparts can...

Product DescriptionU6049662 is an aftermarket cylinder seal kit supplied by Ruijueparts. The official New Holland Construction catalogue identifies U6049662 as a seal kit with multiple sealing and guide components. The public listing does not establish one universal model or cylinder position. Send the cylinder number for a fit check before...

Product Description The 416-1228 aftermarket tilt cylinder seal kit is referenced for Caterpillar-compatible 992K wheel loader hydraulic cylinder service. It is a standard-size kit intended for a cylinder bore within the applicable nominal service limit; the OEM reference states a maximum 0.25 mm (0.010 in) bore sizing condition. The reference...

Product DescriptionAHC20489 is an aftermarket cylinder bore seal kit 110mm supplied by Ruijueparts. John Deere lists 310E, 310G, 310J, 310K, 310L and 710K among reference models; a catalogue example is 310L EP boom cylinder AHC14426. This 110 mm bore service kit is not limited to tilt cylinders. Select by the...

Product Description87434292 is an aftermarket hydraulic cylinder seal kit supplied by Ruijueparts. Replacement catalogues list this CASE cylinder kit with a 2.25 inch rod and 4 inch bore reference. The verified dimensional listing does not establish a universal loader model or position; match the original kit and cylinder numbers. Ruijueparts...

Product Description87434293 is an aftermarket tilt cylinder seal kit supplied by Ruijueparts. CASE 621F wheel-loader references include XR/LR cylinder 87366695 and Z-bar cylinder 87366689, with a 3 inch rod and 5 inch bore. The 621F XT/TC tilt arrangement uses a different kit, so machine model alone is insufficient. Neutral or...

Product DescriptionH156587 is an aftermarket cylinder rod wiper seal supplied by Ruijueparts. Replacement catalogues identify a 40 mm rod wiper; the John Deere 1750 planter parts diagram lists H156587 within the cylinder service group. A wiper at the rod entrance has a different role from the pressure seal. Match the...