Hydraulic Valve Seal Kits | Aftermarket Part B2B Supplier| Ruijueparts

Product Description 561-40-00200 is an aftermarket replacement steering valve seal kit for selected Komatsu HD-series rigid dump trucks. It is used when servicing leakage or sealing wear within the steering control valve assembly, rather than rebuilding a hydraulic cylinder. This reference is commonly associated with HD325, HD405, HD465, HD605, HD785,...

Product Description AHC22108 is an aftermarket 90 mm hydraulic-cylinder bore seal kit for verified John Deere cylinder applications. It seals the piston-side/bore end, not the rod or gland end, making it suitable when internal bypass or piston-seal wear is identified. AH212097 and AH202290 are earlier reference numbers. Fitment spans forestry,...

Product Description TH111627 is an aftermarket hydraulic seal kit for the dipper stick/arm cylinder on selected John Deere 892D and 892D LC excavators. Published fitment data identifies a 110 mm rod and 165 mm bore for cylinder references AT131416 and TH111616, prior to serial number 703549. The dipper cylinder controls...

Product Description AT280406 is an aftermarket hydraulic control-valve spool seal kit for selected John Deere construction equipment. It reseals the movable spool section inside a control valve and may help address leakage or control loss from worn seals. It is not a hydraulic cylinder, pump, or engine seal kit. Parts...

Product Description 335-1414 is an aftermarket control valve seal kit reference for compatible Caterpillar backhoe loaders. A 424B parts manual shows it in a control-valve/control-bank assembly, not a cylinder group. It supports resealing the applicable valve location during control-valve service. The public listing does not identify a universal valve position...

Product Description 310-5742 is an aftermarket hydraulic relief-valve seal kit reference for compatible Caterpillar wheel loaders. Unlike a solenoid valve kit, it services a pressure-relief valve in the hydraulic circuit rather than an electrically actuated valve. Do not order by loader model alone: hydraulic configurations can vary by serial number...

Product Description 332-5669 is an aftermarket solenoid valve seal kit reference for compatible Caterpillar equipment. Official data identifies backup rings and O-rings in NBR/HNBR/XNBR rubber and PTFE for servicing solenoid valve group components. It seals hydraulic valve interfaces, not a cylinder, pump, or motor overhaul. One machine may contain several...

Product Description 308-1838 is an aftermarket hydraulic manifold relief-valve seal kit reference for compatible Caterpillar equipment. Official data identifies O-rings and split back-up rings for servicing the manifold relief valve group. It is a control valve kit, not a hydraulic cylinder, travel motor, or transmission repair kit. The same machine...

Product Description The 238-9844 aftermarket shuttle valve seal kit is a reference replacement for compatible Caterpillar wheel loader and integrated tool carrier hydraulic units. The official reference identifies O-rings and backup rings for servicing components in the shuttle valve group; it is not a complete valve assembly, solenoid valve, or...

Product Description The 387-2867 aftermarket solenoid valve seal kit is a reference replacement for selected Caterpillar-compatible powertrain and hydraulic-control applications. Although described as a kit, the OEM reference identifies it as an O-ring sealing item for a solenoid valve; it is not a complete solenoid valve and not a hydraulic...

Product Description 335-1414 is an aftermarket control valve seal kit reference for compatible Caterpillar backhoe loaders. A 424B parts manual shows it in a control-valve/control-bank assembly, not a cylinder group. It supports resealing the applicable valve location during control-valve service. The public listing does not identify a universal valve position...