Product Description267-8985 is an aftermarket O-ring referenced for the steering axle on selected Caterpillar wheeled excavators. It is an individual sealing component rather than a full axle repair kit. The nearby 267-8984 reference describes another ring, so verify the exact groove and original number before ordering. Ruijueparts can assist with...
Product Description267-8984 is an aftermarket O-ring referenced for Caterpillar wheeled-excavator axle sealing. It is distinct from 267-8985, which appears in related assemblies but has a different reference specification. Check the axle diagram and exact groove before purchase instead of treating the pair as interchangeable. Ruijueparts can review a list of...
Product Description VOE4789826, also referenced as 4789826, is an aftermarket wheel rim O-ring for selected Volvo construction equipment. It is a single sealing ring used in specified front or rear wheel-rim assemblies, rather than a hydraulic cylinder repair kit or a complete multi-piece seal kit. In the applicable rim configuration,...
Product DescriptionT42302 is an aftermarket o-ring supplied by Ruijueparts. Tractor references include John Deere 6R 110 and 6R 120; the original reference lists 101.27 mm inside diameter and approximately 2.62 mm section. This is an individual O-ring reference, not a complete cylinder repair kit. Match the groove and service number...
Product Description85808278 is an aftermarket o-ring supplied by Ruijueparts. The dealer catalogue identifies 85808278 as the replacement for O-ring 73300801. Referenced tractor diagrams include CASE IH 2120 and 2130 steering-pump and hydraulic piping groups. This is an individual O-ring; confirm the exact diagram position and serial range before using an...
Product Description70923596 is an aftermarket o-ring supplied by Ruijueparts. The Fiat-Allis 545/545H loader parts book lists this O-ring at the spindle-to-housing joint, with a 6.75 inch reference inside diameter. It is a single O-ring, not a hydraulic cylinder seal kit; check the axle diagram and housing configuration. For older equipment,...
Product Description 049944 is an aftermarket steering cylinder seal kit reference for Carraro axle applications. Technical diagrams place it in the axle-steering-cylinder assembly and associate it with steering cylinder reference 147241. It is listed for MST M542 and M544 backhoe loaders and may be used on other equipment only where...
Product Description 180-27-11620 is an aftermarket final drive O-ring matched to the original Komatsu part-number reference. It is a single sealing component used in specified articulated dump truck final drive and brake hub assemblies, not a hydraulic cylinder repair kit or complete final drive seal kit. Its role is to...
Product Description 86507789 is an aftermarket steering control unit seal kit matched 1:1 to the current CNH original reference. It replaces legacy part number 1343658C3, allowing distributors to serve both current and older part-number searches with one product listing. This kit is for the hydraulic steering hand pump, Orbitrol, or...
Product Description AT85197 is an aftermarket flat-face O-ring assortment kit for servicing compatible John Deere hydraulic connections. The reference kit contains 80 O-rings in eight common sizes, listed as 90-durometer O-rings for #4, #6, #8, #10, #12, #16, #20, and #24 fittings. It is intended for fitting-level maintenance, not for...
Product Description9991976 is an aftermarket o-ring supplied by Ruijueparts. Original reference dimensions are 18.7 mm inside diameter and 1.7 mm section. This is an individual sealing ring, not a cylinder repair kit. Check the groove and original number; diameter alone does not establish the correct material. Ruijueparts offers reference lookup...
Product Description154467A1 is an aftermarket o-ring supplied by Ruijueparts. CNH lists this O-ring with reference dimensions of 10.8 mm inside diameter and 2.4 mm section. Match both cross-section and groove; a similar-looking ring or nearby part number is not proof of compatibility. For older equipment, Ruijueparts can assess custom sealing...
Product Description86529541 is an aftermarket o-ring supplied by Ruijueparts. The original CNH reference identifies an O-ring with 32.91 mm inside diameter and 3.53 mm section. Its use must be matched to the specific joint in the parts diagram. Do not infer pressure or temperature ratings for this aftermarket item from...
Product DescriptionAL175094 is an aftermarket steering cylinder seal kit supplied by Ruijueparts. John Deere tractor references include 6810, 6910, 6820, 6920 and 6150R; the Dana catalogue cross-references cylinder sealing kit 750.24.450.15. The axle and steering-cylinder versions decide fit. A cross-reference does not make every steering kit for the same tractor...
Product Description Keep your heavy machinery operating at peak performance with this aftermarket VOE11716625 hydraulic power steering cylinder seal kit. Specifically engineered to fit a 36mm rod and 65mm bore, this high-grade replacement kit ensures a leak-free, responsive steering system for your equipment. At Ruijueparts, we bridge the gap for...
Product Description154656A1 is an aftermarket o-ring supplied by Ruijueparts. The CNH dealer parts list identifies 154656A1 as an O-ring. It must be selected by the original service reference and matching groove. It is not a complete hydraulic cylinder kit. Do not use a general seal-kit illustration to determine supplied quantity....
Product Description154463A1 is an aftermarket o-ring supplied by Ruijueparts. CNH lists this O-ring in construction-equipment service groups and gasket kit LZ00626. This is a single component rather than the full gasket kit. Confirm the diagram position and quantity required for your repair. Neutral or customer-specified packaging is available for repair...
Product Description86900100 is an aftermarket lift piston o-ring supplied by Ruijueparts. Ford 2000 and 3000 tractor parts books list this lift piston O-ring, with a 2.600 inch inside diameter and 0.210 inch section. The piston backup ring is listed separately; this number does not identify a complete lift overhaul kit....
Product Description161097A1 is an aftermarket o-ring supplied by Ruijueparts. The CASE Construction catalogue identifies this part as an individual O-ring and lists it in hydraulic service assemblies. The catalogue reference alone does not establish a universal excavator fit; supply the machine serial and diagram position. Neutral or customer-specified packaging is...
Product Description154491A1 is an aftermarket o-ring supplied by Ruijueparts. CNH construction service group KG1RP618-00 lists 154491A1 as an individual O-ring among hydraulic line and valve components. Check the exact assembly and diagram position; do not treat all seals in the service group as interchangeable. Neutral or customer-specified packaging is available...
Product DescriptionVOE11999906 is an aftermarket steering cylinder seal kit referenced for Volvo L120C and L120D wheel-loader applications. Cylinder 11088537 is the useful assembly reference when checking the match. Steering cylinders articulate the machine, whereas lift and tilt cylinders operate the loader linkage and bucket. Verify the installed cylinder and applicable...
AHC16372 is an aftermarket hydraulic steering-cylinder seal kit for selected John Deere tractors and combines. John Deere places this reference in its Steering Cylinders Kits category, and AH157509 is cited as an earlier reference by parts suppliers. Match the kit to the steering cylinder—not only the machine model—because a...
Product DescriptionAL166294 is an aftermarket steering cylinder seal kit supplied by Ruijueparts. Selected John Deere tractors include 6120, 6220, 6320, 6420, 6520, 6620 and 6820; replacement references include specific ZF axle configurations. AL114016 is a related catalogue reference, not permission to ignore axle variants. Check the axle plate and steering...
