Product Overview The 71452371 hydraulic seal kit is a reliable aftermarket replacement for CASE machinery. Designed for hydraulic cylinders and lift applications, it includes rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent fluid leakage. It is suitable for servicing lift hydraulic cylinders used in...

Product Description 10X1783 is an aftermarket stabilizer cylinder seal kit for selected Terex backhoe loader applications. Parts information identifies it in the stabilizer cylinder assembly of the Terex TLB 815, while aftermarket catalogues also associate it with selected Terex Vectra TX740S and TX760 applications. Stabilizer-cylinder revisions can differ by model...

Product Description The 288-2549 aftermarket transmission gasket kit is supplied for Caterpillar-compatible IT62G, IT62G II, 950G, 950G II, 962G, 962G II, and 950H equipment. It is used during a complete transmission overhaul to renew applicable sealing interfaces and help control fluid leakage after correct installation. The OEM reference describes this...

Product Description Aftermarket 6659601 hydrostatic drive motor seal kit for compatible Bobcat skid steer loader applications. This kit is referenced for drive motor sealing service, helping replace worn seals, reduce oil leakage, and support stable forward and reverse travel operation. Listed applications include Bobcat 645, 653, 742, 743, 751, and...

Product Overview The 2764172 seal kit is an aftermarket hydraulic seal solution for Caterpillar backhoe loader cylinder repair. This seal kit is commonly used in hydraulic cylinder maintenance, helping restore sealing performance, reduce oil leakage, and support stable hydraulic pressure during daily machine service. Keywords included: 2764172 seal kit, Caterpillar...

Product Description 991/00100 is an aftermarket hydraulic cylinder seal kit referenced for selected JCB backhoe loader cylinder applications. The reference size is 40 mm rod × 70 mm bore, but this is not a single-position kit: documented uses include specified boom, dipper, rear bucket, front shovel, lift, swing, stabilizer, extension,...

Product Overview The 7163219 seal kit is a reliable aftermarket replacement for Bobcat equipment. Designed specifically for track tensioner grease cylinder applications, it includes wiper rod seals, wear rings, and O‑rings to restore sealing performance and prevent grease or hydraulic fluid leakage. This kit supports consistent track tension and optimal...

Product Description This aftermarket hydraulic breaker seal kit is for verified Atlas Copco / Epiroc C140 hydraulic hammer repair applications. C140 is a hydraulic breaker model, not a carrier excavator model or hydraulic cylinder reference. The kit is intended for replacing applicable internal sealing components during planned hammer overhaul, leakage...

Product Description 991/00018 is an aftermarket replacement slew ram seal kit for selected JCB backhoe loader applications using a 110 mm slew or side-shift cylinder. It is intended to renew applicable rod-end and piston-end sealing positions when the slew ram shows hydraulic leakage, reduced holding performance, or requires planned overhaul....

Product Description Protect your drivetrain and eliminate costly planetary gear oil leaks with this premium aftermarket 332/E8224 hub oil seal, specifically engineered for JCB backhoe loaders and telescopic handlers. This heavy-duty axle shaft wheel hub seal is precision-molded from high-grade, wear-resistant elastomer compounds coupled with a robust steel casing. Designed...

Product Description 6803334 is an aftermarket tilt cylinder seal kit referenced for selected Bobcat skid-steer and mini track loaders. It services the hydraulic cylinder that rolls the bucket or attachment forward and back, helping restore controlled tilt movement when seal wear causes leakage or pressure loss. This reference is commonly...

Product Description Premium aftermarket 186-4327 hydraulic cylinder seal kit designed for Caterpillar backhoe loaders. This high-quality repair kit includes all necessary seals (wiper, U-seal, buffer, and piston seals) to fix leaks and restore hydraulic pressure in bucket cylinders for models like 416C, 428C, and 438C. A reliable, cost-effective solution for...

Product Description 86507789 is an aftermarket steering control unit seal kit matched 1:1 to the current CNH original reference. It replaces legacy part number 1343658C3, allowing distributors to serve both current and older part-number searches with one product listing. This kit is for the hydraulic steering hand pump, Orbitrol, or...

Product Description SB131 U641 is an aftermarket hydraulic breaker seal kit reference for selected Soosan SB131 hydraulic breakers. The U641 designation is commonly used in aftermarket seal catalogues to identify a heat-resistant polyurethane seal specification for breaker service. This kit is intended to renew compatible internal sealing positions during hydraulic...

Product Description 244-2067 is an aftermarket ripper lift cylinder seal kit for selected Caterpillar D8-series track-type tractors. It services the hydraulic cylinder that raises and lowers the rear ripper assembly, not the ripper tilt or pitch cylinders. A published D8R major-components catalogue identifies 244-2067 for ripper lift cylinder group 155-3653;...

Product Description AL208001 is an aftermarket hydraulic lift cylinder seal kit reference for selected John Deere agricultural tractors. Official parts data identifies it as a lift cylinder seal kit, and published replacement references associate it with an 85 mm lift-cylinder application. It is used for the tractor hydraulic lift system...

Product Overview The 71400231 hydraulic seal kit is a reliable aftermarket replacement for excavator hydraulic cylinder applications. Designed for cylinder sealing service, it includes rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent fluid leakage. It is commonly used in Fiat-Hitachi excavator hydraulic systems for...

Product Description If you are looking for a reliable, high-performance aftermarket sealing solution for your Volvo BM 4400 wheel loader, this VOE6630559 / 6630421 tilt lift cylinder seal kit is precisely engineered to meet your needs. Designed specifically to restore the hydraulic pressure of classic heavy equipment, this premium replacement...

Choose the seal kit of Ruijueparts. Slash costly downtime.Fits equipment: 420F2, 432E, 420E, 434E, 444F2, 420F, 420F2 Condition: New – Open box: A new, unused item Brand: CATERPILLAR replacementTarget Audience: Customers with long-term procurement needs for sealing kits, including repair shops, distributors, import/export trading companies, and construction machinery rental companies.

Product Description Are you facing hydraulic leaks or loss of tilt power on your SANY BHL75 front loader? Precision is the key to minimizing downtime. Our aftermarket 12993725 Tilt Cylinder Seal Kit is specifically engineered for the loader bucket cylinder, ensuring a 100% tight seal and smooth tilting action. Crafted...

Product Description 5422890 is an aftermarket piston seal kit for the hydraulic lock of the rear carriage on MST backhoe loaders. It is used to reseal the piston within the locking mechanism that secures the rear excavator carriage assembly; it is not a standard boom, dipper, bucket or hydraulic control-valve...

Product Description C3X005 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB81 hydraulic hammers. The Soosan SB-series parts book identifies C3X005 for the SB81 configuration. It is used when servicing internal breaker sealing positions during planned overhaul, oil leak inspection, or component repair. SB81 must not...

Product Description 6816536 is an aftermarket hydraulic cylinder seal kit commonly cross-referenced to 7137939 for selected Bobcat equipment. Its cylinder function changes by equipment type: it can serve designated lift or tilt cylinders on loaders, a boom cylinder on selected compact excavators, or a working cylinder on compatible backhoe loaders....

Product Description 6803268 is an aftermarket hydraulic cylinder seal kit referenced for selected Bobcat compact excavators. It is not limited to one cylinder function: depending on the machine configuration and cylinder number, the same reference may service an arm, boom, bucket, clamp, or lifting cylinder. The kit is associated with...