Product DescriptionThis aftermarket sealing kit is offered for matching Bosch Rexroth A4VG125 hydraulic pump applications. A4VG125 identifies a pump family and size, rather than a unique seal-kit part number, so the complete nameplate code and repair scope should be checked before purchase. Pump versions can use different sealing sets. Ruijueparts...

Product Description AH212585 is an aftermarket 110 mm hydraulic-cylinder piston/bore seal kit for John Deere equipment. It is a bore-side kit with a four-piece capped T-seal; data lists no rod seal or wiper. John Deere lists AHC20489 as its substitute bore-seal kit. References place AH212585 in specific backhoe boom, crowd,...

Product Description Aftermarket 71418473 hydraulic cylinder oil seal for compatible Fiat-Hitachi EX-215, EX-225, and EX-235 crawler excavators. Fitted in the cylinder sealing system, it helps retain hydraulic oil, reduce leakage, and block contaminants as the cylinder extends and retracts. Applications may vary between boom, arm, and bucket cylinders or by...

Product Description 258-0500 is an aftermarket replacement stick cylinder seal kit for selected Caterpillar wheeled excavators and material-handling machines. The reference kit is designed for a 120 mm cylinder-bore assembly and includes matched sealing, guiding and backup components for resealing the applicable cylinder group. Compatibility is configuration-specific: one machine may...

Product Description This aftermarket 991/00021 hydraulic cylinder seal kit is referenced for selected JCB cylinders with a 30 mm piston rod and 60 mm cylinder bore. Its primary application is on selected backhoe loader steering rams, while the same reference is also listed for certain telehandler tilt and side-tilt cylinders....

Product Description Aftermarket 122535A1 swing cylinder seal kit for Case backhoe loader swing cylinder rebuild applications. This kit is used to service one standard hydraulic swing cylinder and helps repair oil leakage, restore sealing performance, and protect the cylinder during swing operation. It is referenced with part numbers 122535A1, 122535A1-A,...

Product Description9595508 is an aftermarket piston-side seal kit with reference applications in several Liebherr mining-cylinder configurations. Its use is not limited to a single boom or bucket position, so the installed cylinder number is the most useful starting point for a purchasing check. Confirm the machine configuration and any separate...

Product Overview The 991/10130P hydraulic seal kit is a reliable aftermarket replacement for JCB machinery. Designed for hydraulic cylinders and ram lift applications, it includes rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent fluid leakage. Ideal for telehandlers, wheel loaders, and other JCB hydraulic...

Product Description Ensure peak performance for your Volvo excavator with our VOE14589162 Cylinder Seal Kit. Specifically designed for ECR58 models, this high-quality aftermarket kit prevents oil leaks and protects your hydraulic system from contaminants. Built with premium materials to ensure durability and a perfect fit for heavy-duty operations. Item specifics...

Product Description Aftermarket VOE17253420 tilt cylinder seal kit for selected Volvo L110G, L110H, L120G, and L120H wheel loaders. It services the bucket-tilt hydraulic cylinder that curls and dumps the loader bucket during operation. The reference size is a 110 mm rod × 210 mm bore. Compatibility changes with the machine...

Product Description 991/00018 is an aftermarket replacement slew ram seal kit for selected JCB backhoe loader applications using a 110 mm slew or side-shift cylinder. It is intended to renew applicable rod-end and piston-end sealing positions when the slew ram shows hydraulic leakage, reduced holding performance, or requires planned overhaul....

Product Description Ensure your heavy-duty excavators maintain maximum breakout force with the 707-99-67010 Bucket Cylinder Seal Kit. Specifically engineered for Komatsu PC400-7 and PC450-7 series, this aftermarket kit is designed for cylinders with a 160mm bore and 110mm rod. As the bucket cylinder endures the highest impact and wear during...

Product Description 6194015M91 is an aftermarket steering cylinder seal kit for selected Terex 4WD backhoe loaders. It repairs the front-axle hydraulic steering cylinder, reference 6194023M91, which turns the front wheels; it is not a rear backhoe swing or stabilizer-cylinder kit. The Terex parts catalogue places this kit in the front-axle...

Product Description Aftermarket VOE11707447 lift cylinder seal kit for Volvo L120C and L120D wheel loaders equipped with lift cylinder 11107316. It services the hydraulic cylinder that raises and lowers the loader boom and bucket assembly. The reference size is a 90 mm rod × 170 mm bore. Compatibility is controlled...

Product Overview The 4540380 hydraulic cylinder seal kit is an aftermarket replacement solution designed to fit hydraulic cylinders on Caterpillar loaders and backhoe loaders. It includes essential sealing components such as rod seals, piston seals, wipers, and O‑rings that help restore cylinder sealing performance and prevent hydraulic fluid leakage during maintenance...

Product DescriptionFor bucket leakage on older Volvo / Samsung MX3-family excavators, match both the cylinder position and kit number. 813-000150 is an aftermarket bucket cylinder seal kit, also catalogued as 8130-00150, for Volvo / Samsung MX3, MX3W and MX3W-2 reference applications. Confirm the cylinder identification and machine serial number before...

Product Description 86507789 is an aftermarket steering control unit seal kit matched 1:1 to the current CNH original reference. It replaces legacy part number 1343658C3, allowing distributors to serve both current and older part-number searches with one product listing. This kit is for the hydraulic steering hand pump, Orbitrol, or...

Product Description 998/10783 is an aftermarket hydraulic seal kit referenced for JCB equipment. JCB’s public parts catalogue classifies this number within hydraulics as “Kit Seal,” but does not publish the component position, machine model, dimensions, or kit contents without equipment compatibility selection. Independent catalogue records also use only the generic...

Product DescriptionU6049662 is an aftermarket cylinder seal kit supplied by Ruijueparts. The official New Holland Construction catalogue identifies U6049662 as a seal kit with multiple sealing and guide components. The public listing does not establish one universal model or cylinder position. Send the cylinder number for a fit check before...

Product Description Ensure your SANY BHL75 backhoe loader maintains peak digging performance with our high-quality aftermarket bucket cylinder seal kit (Part No. 12997953). Specifically engineered for the rear digging arm, this kit resolves common hydraulic leaks and pressure loss in the bucket cylinder, ensuring smooth and precise control of every...

Product Description Eliminate fluid leaks and restore full hydraulic pressure with this premium aftermarket 991/00122 hydraulic cylinder seal kit, engineered for heavy-duty JCB equipment. Developed as a 1:1 exact replica of factory specifications, this kit seamlessly fits standard rams with a 50mm rod diameter and 90mm bore size. Manufactured from...

Product Description AHC13362 is an aftermarket 63 mm hydraulic cylinder rod seal kit for John Deere equipment. It seals the rod and gland end, not the piston-side bore. It is used on selected backhoe loaders, wheel loaders, crawler dozers, forestry machines, and tractors. Cross-reference data associates it with AH149815, including...

Product Description TH111627 is an aftermarket hydraulic seal kit for the dipper stick/arm cylinder on selected John Deere 892D and 892D LC excavators. Published fitment data identifies a 110 mm rod and 165 mm bore for cylinder references AT131416 and TH111616, prior to serial number 703549. The dipper cylinder controls...

Product Description Maintain precise control and peak responsiveness on your equipment with our premium aftermarket 178-7189 steering cylinder seal kit, engineered specifically for Caterpillar backhoe loaders. This high-grade repair kit includes all essential components—such as oil seals, dust wipers, U-cups, buffer seals, and wear bands—tailored to fit the 36mm rod...