Product Description The 288-2549 aftermarket transmission gasket kit is supplied for Caterpillar-compatible IT62G, IT62G II, 950G, 950G II, 962G, 962G II, and 950H equipment. It is used during a complete transmission overhaul to renew applicable sealing interfaces and help control fluid leakage after correct installation. The OEM reference describes this...

Product Description Keep your motor grader performing at peak efficiency with the 707-99-25270 Blade Shift Cylinder Seal Kit. Specifically engineered for aftermarket excellence, this kit is designed to handle the high-pressure demands and constant shock loads associated with blade lateral movement. Each component—from the reinforced piston seals to the precision-fit...

Product Description Description: 5J0964-3K is an aftermarket reference for a U-cup rod seal assembly based on Caterpillar reference 5J-0964. The original 5J-0964 is designed to replace legacy Chevron packing in selected hydraulic cylinder rod-end grooves. It is a rod-side sealing component, not a complete hydraulic cylinder overhaul kit. The fitment...

Product Description Aftermarket VOE11708054 engine hood hydraulic cylinder seal kit for selected Volvo A25D, A25E, A25F, A30D, A30E, A30F, A35D, A35E, A35F, A40D, A40E and A40F articulated haulers. It is used to reseal the cylinder that raises and lowers the engine hood during service access after leakage, seal wear, or...

Product Description Aftermarket 7135557 hydraulic cylinder seal kit for compatible Bobcat skid steer loaders, compact track loaders, and compact excavators. This 2.25" bore × 1.50" rod seal kit is referenced for loader lift cylinders and selected excavator extendable arm, bucket, or clamp cylinders, depending on the machine model and cylinder...

Product Description This aftermarket 991/00021 hydraulic cylinder seal kit is referenced for selected JCB cylinders with a 30 mm piston rod and 60 mm cylinder bore. Its primary application is on selected backhoe loader steering rams, while the same reference is also listed for certain telehandler tilt and side-tilt cylinders....

Product Description154656A1 is an aftermarket o-ring supplied by Ruijueparts. The CNH dealer parts list identifies 154656A1 as an O-ring. It must be selected by the original service reference and matching groove. It is not a complete hydraulic cylinder kit. Do not use a general seal-kit illustration to determine supplied quantity....

Product Description This aftermarket 561-34-71630 rear brake seal is referenced for selected Komatsu HD785-7 rear axle final brake assemblies. It is an individual internal wet brake service component, used during rear wheel brake maintenance and overhaul. This part is not a complete brake seal kit, floating seal assembly, or hydraulic...

Product Description AH146043 is an aftermarket hydraulic seal kit reference for the unloading auger swing cylinder on selected John Deere combines. It supports resealing the cylinder that swings the unloading auger between operating and stowed positions. Confirm the machine serial number, cylinder assembly, and parts diagram before purchase, especially where...

Product Overview The 991/00159P hydraulic seal kit is a reliable aftermarket replacement for JCB machinery. Designed for hydraulic ram and lift cylinders, this comprehensive seal kit includes rod seals, piston seals, backup rings, and O‑rings to restore sealing performance and prevent fluid leakage. Ideal for use in telehandlers and other JCB...

Product Description Restore the hydraulic integrity of your heavy machinery with the high-grade 244-2050 Tilt Cylinder Seal Kit from Ruijueparts. Designed for Caterpillar’s heavy-duty applications, this 9-piece kit is engineered to withstand high-pressure environments, preventing fluid bypass and protecting your equipment from contamination. This kit features a 6.50" (165.1 mm)...

Product Description AH212101 is an aftermarket 100 mm hydraulic cylinder bore seal kit reference for selected John Deere equipment. Official John Deere data identifies it as a hydraulic cylinder kit with a 100 mm bore and lists AHC19515 as a substitute reference. The kit is intended for the piston and...

Product Overview The 7163219 seal kit is a reliable aftermarket replacement for Bobcat equipment. Designed specifically for track tensioner grease cylinder applications, it includes wiper rod seals, wear rings, and O‑rings to restore sealing performance and prevent grease or hydraulic fluid leakage. This kit supports consistent track tension and optimal...

Product Overview The 6089590 hydraulic seal kit is a reliable aftermarket replacement for Caterpillar machinery. Designed for hydraulic cylinder sealing applications, it includes sealing components such as rod seals, piston seals, backup rings, and O-rings to help restore sealing performance and prevent hydraulic oil leakage. It is suitable for maintenance...

Product Overview The 5439705 hydraulic seal kit is a reliable aftermarket replacement for Caterpillar machinery. Designed for motor grader hydraulic applications, it includes rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent hydraulic fluid leakage. It is suitable for grader hydraulic maintenance where reliable sealing...

Product Description 281-8870 is an aftermarket replacement transmission gasket kit for selected Caterpillar motor graders and a CS-583C vibratory compactor. It is intended for transmission overhaul work, helping technicians renew the gaskets, seals, and O-rings used across applicable transmission assemblies. This is not a hydraulic cylinder seal kit; correct identification...

Product Description Premium aftermarket 14X-13-05010 Torque Converter Service Kit for Komatsu D85E-SS-2, D65E-12, and D65PX-12. This repair kit includes high-quality seal rings, O-rings, and gaskets to restore torque converter efficiency. Ruijueparts offers custom solutions for vintage equipment and 30,000+ PN lookups to ensure a perfect fit for your bulldozer maintenance....

Product Description The 7X2747 Hydraulic Cylinder Seal Kit is an aftermarket replacement for Caterpillar wheel loaders. Catalogs identify lift-cylinder use on 930, 930R, and 930T models and steering-cylinder use on 980 and 980B models. Cylinder references are 7J9872 for lift LH, 7J9871 for lift RH, 7J9786 for steering LH, and...

Product Description6669586 is an aftermarket swivel joint oil seal supplied by Ruijueparts. The original oil-seal reference uses a rotary sealing element together with an O-ring. Crown seal 6669591 remains a separate reference for a different service item. Match the original service number, machine serial number and installed assembly before ordering....

Product Description This aftermarket 561-33-71510 rear brake seal is referenced for selected Komatsu HD785-7 mining dump truck rear axle final brake assemblies. It is an individual internal seal used during rear wheel brake overhaul, not a complete repair kit, friction disc, or hydraulic cylinder seal. The rear brake assembly uses...

Product Overview The 991/10130P hydraulic seal kit is a reliable aftermarket replacement for JCB machinery. Designed for hydraulic cylinders and ram lift applications, it includes rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent fluid leakage. Ideal for telehandlers, wheel loaders, and other JCB hydraulic...

Product Description9L5650 is an aftermarket O-ring reference used in selected Caterpillar grader and engine applications. It is a separate sealing ring, not a complete engine or transmission gasket set. Match the original reference and its groove position before ordering; colour and overall appearance do not establish size or material suitability....

Product Description Premium aftermarket 878000425 arm stick cylinder seal kit fits Komatsu PC95R-2 mini excavators. Designed for heavy-duty leak repair, this kit features high-grade TPU and NBR seals to ensure pressure retention and long service life. Direct replacement for OEM cylinder 226-61-11400. Item specifics Part Number: 878000493 Fits Models: PC95R-2...

Product Description 160-6386, 9Y-1655, and 8N-7139 are cross-reference numbers for an aftermarket radiator core and end-tank seal used in selected Caterpillar cooling-system assemblies. Made for radiator service work, this EPDM rubber seal reference helps buyers identify the correct component when rebuilding folded-core radiator sections or addressing leakage around radiator tank...