Product Description 6589807 is an aftermarket arm cylinder seal kit referenced for Bobcat X320 and 320 compact excavators. It is used to rebuild the arm cylinder that controls dipper movement during digging and material handling. The kit is associated with cylinder references 6589582 and 6803040 on specified serial-number ranges. Its...

Product Description 998/10783 is an aftermarket hydraulic seal kit referenced for JCB equipment. JCB’s public parts catalogue classifies this number within hydraulics as “Kit Seal,” but does not publish the component position, machine model, dimensions, or kit contents without equipment compatibility selection. Independent catalogue records also use only the generic...

Product Description2129-6013BKT is an aftermarket track adjuster seal-kit reference listed for selected Doosan DX80R, DX85R-3 and Solar 75-V applications. The repair position is the track tensioning assembly, so it should not be confused with a travel motor kit used on similar compact excavators. Verify the adjuster identification and original service...

Product Description 7196481 is an aftermarket hydraulic cylinder seal kit for selected Bobcat compact excavators. Although Bobcat also describes this reference as a boom swing cylinder kit, verified equipment catalogues show that its working-cylinder position varies by model: it can service a designated blade cylinder or swing cylinder. It is...

Product Description 132-6783 is an aftermarket hydraulic blade lift cylinder seal kit for Caterpillar D11N and D11R crawler dozers. It services the left- or right-hand dozer lift cylinders that raise and lower the blade; it is not the blade tilt, ripper or pin-puller kit. Published catalogues identify cylinder 4T2727 for...

Product Description6664908 is an aftermarket swivel joint seal kit supplied by Ruijueparts. This kit services the central hydraulic swivel rather than the boom, arm or bucket cylinder. Confirm the swivel assembly reference before planning a full joint rebuild. Match the original service number, machine serial number and installed assembly before...

Get a customized device model matching solution now.Condition: New – Open box: A new, unused item Brand: Caterpillar replacement

Product Description AT183658 is an aftermarket arm cylinder seal kit reference for selected John Deere crawler excavators. Published applications identify it for the arm, crowd, or dipper cylinder assembly AT154865 on 230LC excavators and specified 790E LC excavators. The published cylinder dimensions are a 100 mm rod and a 135...

Product Description1917725K is an aftermarket seal-kit ordering reference for a matching Caterpillar 191-7725 extendable-stick cylinder. The K suffix identifies the repair-kit reference used in replacement catalogues; the cylinder number without K describes the assembly. Confirm the installed extendable-stick cylinder before purchase rather than selecting a standard digging-stick kit. Ruijueparts can...

Product Description The 229-2626 Hydraulic Cylinder Seal Kit is an aftermarket standard-size reseal kit for selected Caterpillar track-type tractors, bulldozers, rippers, and related equipment. Official fitment includes D6H, D6R, D6T, and D7R variants; D7H; 7-series ripper; 7A/7S/7SU/7U bulldozers; and 57H winch. Match the kit to the cylinder group before ordering....

Product Description 61281-000 is an aftermarket replacement shaft seal kit for selected Danfoss Char-Lynn 4000 Series hydraulic motors with a -006 design level. It is intended for servicing the motor’s shaft-end sealing area when leakage is found around the output shaft. Before ordering, confirm the complete motor model code and...

Product Description The 489-1720 Bucket Cylinder Seal Kit from Ruijueparts is a high-performance aftermarket solution engineered for 50-ton class heavy excavators. Designed for 110mm Rods and 160/170mm Bores, this kit provides superior hydraulic retention and debris exclusion for high-pressure digging operations. We utilize premium materials to ensure our seals withstand...

Product Description 86627882 is an aftermarket replacement hydraulic breaker seal kit for the Montabert SC12 hydraulic rock breaker. It is intended for resealing confirmed internal breaker service positions during overhaul, including maintenance after hydraulic oil leakage, pressure loss, or planned breaker dismantling. The SC12 is a compact breaker commonly matched...

Product DescriptionVOE17496978 is an aftermarket gear-selector valve sealing kit referenced across selected Volvo wheel loaders, articulated haulers and motor graders. Replacement catalogues also associate it with reference 15089650. This is a transmission hydraulic-control service item, not a complete gearbox gasket set or a working-cylinder kit. Check the valve and transmission...

Product Overview The 2764172 seal kit is an aftermarket hydraulic seal solution for Caterpillar backhoe loader cylinder repair. This seal kit is commonly used in hydraulic cylinder maintenance, helping restore sealing performance, reduce oil leakage, and support stable hydraulic pressure during daily machine service. Keywords included: 2764172 seal kit, Caterpillar...

Product Description260-0273 is an aftermarket hydraulic cylinder seal kit referenced for Caterpillar D-series backhoe-loader applications. The original catalogue lists 420D, 428D, 430D, 432D, 438D and 442D, but the cylinder group remains the deciding fit check. Avoid choosing a kit only because the machine model is familiar. Ruijueparts can review the...

Product Description Looking for a reliable aftermarket solution to prevent oil leaks and restore your equipment's hydraulic power? The 295-9893 hydraulic cylinder seal kit is precisely engineered for Caterpillar backhoe loaders, specifically designed for the boom cylinder with a 4-3/4" bore and 2-3/8" rod. Made from high-performance materials, this aftermarket...

Product Description Premium aftermarket 13765391 Swing Cylinder Seal Kit designed specifically for SANY B175 (SY75 series) hydraulic systems. This high-performance repair kit is engineered to resolve common hydraulic issues such as rotation weakness, boom drift, and fluid leakage. At Ruijueparts, we bridge the gap between quality and value, offering seals...

Part Name: 1737714 Seal KitMachine Models: 814B, 615, 615C, D25D, D35C, D25C, D30C, D350D, D350C, D40D, D30D, D400, D35HP, D400D, 966D, 966E, 815B, 816BBrand: Caterpillar replacementType: Articulated Dump Truck Hydraulic Seal KitApplication: Articulated dump truck hydraulic system maintenance / oil leakage repair / fleet servicingSize: Standard SizeSupply Ability: 10,000 sets per monthPerformance: Oil...

Product Description 8T-1374 is an aftermarket hydraulic cylinder seal kit for selected older Caterpillar equipment using a 2.50 in rod and 5.50 in bore reference. It is a dimensional and cylinder-group kit, not a kit dedicated to only one machine function. Published catalogues reference it for ripper cylinders on D4D,...

Product Overview The 6229417 hydraulic seal kit is a reliable aftermarket replacement for Caterpillar machinery. Designed for motor grader hydraulic applications, it includes sealing components such as rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent hydraulic fluid leakage. It is suitable for grader hydraulic...

Product Description 991/20020 is an aftermarket universal hydraulic-cylinder seal kit identified as 50 × 25, meaning a 25 mm piston rod and 50 mm cylinder bore reference. Market catalogues commonly list it for selected JCB 3CX and 4CX steering-cylinder applications. Because JCB uses different rams across series and production variants,...

Product Description The 397-9888 Tilt Cylinder Seal Kit by Ruijueparts is a high-performance aftermarket solution specifically designed for Caterpillar 950GC Wheel Loaders. This kit includes all essential seals, O-rings, and wear rings needed to restore full hydraulic integrity and prevent fluid leaks in the bucket tilt mechanism. Crafted from heavy-duty...