Product Description6P1735 is an aftermarket bearing nut lock washer for Caterpillar reference applications in drivetrain service. The original reference is written 6P-1735 in the parts catalogue. A correct repair depends on the specified nut-lock arrangement, not just a ring that fits over the shaft. Check the tab geometry and assembly...

Product Description243-0384 is an aftermarket hydraulic cylinder seal kit with reference applications across selected Caterpillar graders, scrapers, trucks and loaders. For fleet purchasing, record the cylinder group beside each machine rather than treating the shared kit reference as proof that the complete cylinders are interchangeable. Check the original service number...

Product Description85808278 is an aftermarket o-ring supplied by Ruijueparts. The dealer catalogue identifies 85808278 as the replacement for O-ring 73300801. Referenced tractor diagrams include CASE IH 2120 and 2130 steering-pump and hydraulic piping groups. This is an individual O-ring; confirm the exact diagram position and serial range before using an...

Product Description 170-0493 is an aftermarket replacement accumulator seal kit for selected Caterpillar hydraulic accumulator applications. Caterpillar identifies it as a standard 4-inch-bore piston seal kit, not a hydraulic-cylinder, pump, motor, or transmission repair kit. Hydraulic accumulators store and release pressurized oil to support system response, making correct part-number matching...

Product Description Description: 5J0964-3K is an aftermarket reference for a U-cup rod seal assembly based on Caterpillar reference 5J-0964. The original 5J-0964 is designed to replace legacy Chevron packing in selected hydraulic cylinder rod-end grooves. It is a rod-side sealing component, not a complete hydraulic cylinder overhaul kit. The fitment...

Product Description167-2457 is an aftermarket cylinder wiper seal referenced for several Caterpillar equipment families. A wiper serves the rod entry area and is only one component of a cylinder sealing arrangement; it should not be mistaken for a full repair kit. Check the original number and gland location before ordering,...

Product Description 308-1838 is an aftermarket hydraulic manifold relief-valve seal kit reference for compatible Caterpillar equipment. Official data identifies O-rings and split back-up rings for servicing the manifold relief valve group. It is a control valve kit, not a hydraulic cylinder, travel motor, or transmission repair kit. The same machine...

Product Description 1K-6982 is an aftermarket press-in hydraulic cylinder wiper seal for selected Caterpillar equipment. It is a Type A, single-lip wiper designed for a 2.50 in. rod application, not a complete cylinder repair kit. The wiper is fitted at the rod-end gland and cleans the rod as it retracts,...

Product Description122-4575 is an aftermarket bearing lock washer referenced for Caterpillar transmission service on D10-family track-type tractors. It is locking hardware, so it should not be ordered as an oil seal or a cylinder repair kit. Match the original reference and the mating nut arrangement before assembly. A washer that...

Product Description 1543268C1 is an aftermarket replacement seal kit matched 1:1 to the original CASE repair-kit reference. Its primary application is the backhoe bucket cylinder G103503, with a 2-in rod and 3-1/4-in bore reference. The original part number supersedes G109465, helping distributors manage legacy and current SKU searches under one...

Product Description 6I-2431 is an aftermarket radiator core seal for selected Caterpillar cooling-system assemblies. It is a 160 mm EPDM rubber seal installed between the radiator core and the lower radiator tank; it is not a hydraulic cylinder, pump, or engine oil seal. A damaged seal can allow coolant leakage...

Product Description 8G-4190 is an aftermarket equalizer bar seal for selected Caterpillar tracked equipment. Also called an E-bar seal, it is installed at equalizer bar end-pin or center-pin joints to retain grease while the undercarriage oscillates and to help exclude dirt and moisture. It is a single undercarriage sealing component,...

Product Overview The 7163219 seal kit is a reliable aftermarket replacement for Bobcat equipment. Designed specifically for track tensioner grease cylinder applications, it includes wiper rod seals, wear rings, and O‑rings to restore sealing performance and prevent grease or hydraulic fluid leakage. This kit supports consistent track tension and optimal...

Product Description86529541 is an aftermarket o-ring supplied by Ruijueparts. The original CNH reference identifies an O-ring with 32.91 mm inside diameter and 3.53 mm section. Its use must be matched to the specific joint in the parts diagram. Do not infer pressure or temperature ratings for this aftermarket item from...

Product Description AHC11572 is an aftermarket 45 mm hydraulic cylinder rod seal kit for John Deere equipment. It services the rod and gland end, not the piston-side bore. The official equipment list includes backhoe loaders, compact track loaders, skid steers, wheel loaders, and crawler equipment. A 772G/GP grader guide lists...

Product Description AH146043 is an aftermarket hydraulic seal kit reference for the unloading auger swing cylinder on selected John Deere combines. It supports resealing the cylinder that swings the unloading auger between operating and stowed positions. Confirm the machine serial number, cylinder assembly, and parts diagram before purchase, especially where...

Product Description AT183658 is an aftermarket arm cylinder seal kit reference for selected John Deere crawler excavators. Published applications identify it for the arm, crowd, or dipper cylinder assembly AT154865 on 230LC excavators and specified 790E LC excavators. The published cylinder dimensions are a 100 mm rod and a 135...

Product Description AHC18638 is an aftermarket 36 mm hydraulic cylinder rod seal kit reference for selected John Deere equipment. John Deere identifies the reference as a hydraulic cylinder rod seal kit, and published seal catalogs list a 36 mm rod application. It is a rod and gland-side kit, not a...

Product Description RE18751 is an aftermarket 1-3/4 in. rod × 3 in. bore hydraulic cylinder seal kit for selected legacy John Deere equipment. It is a size-based kit used across more than one cylinder position, including published bucket, stabilizer, lift, and backhoe-cylinder applications. This cross-use makes fitment verification essential; do...

Product Description AH165931 is an aftermarket hydraulic cylinder bore seal kit reference for selected John Deere agricultural, forestry, and construction equipment. John Deere identifies the original reference as a hydraulic cylinder kit; replacement catalogs cross it to AHC16965, a 1.969 in. bore seal kit. The bore-side kit differs from a...

Product Description AHC16954 is an aftermarket 50 mm hydraulic cylinder rod seal kit reference for John Deere equipment. It services the rod and gland end, not the piston-side bore. A published 772G/GP grader guide lists it for articulation, wheel-lean, blade-lift, blade-tilt, and circle-side-shift cylinders. As one kit may serve different...

Product Description AHC13278 is an aftermarket 56 mm hydraulic cylinder rod seal kit for John Deere equipment. It services the rod and gland end, not the piston-side bore. John Deere lists AHC16683 as the substitute; AH149814 is an earlier reference. Published data identifies boom and crowd cylinder applications on selected...

Product Description AH149810 is an aftermarket steering-cylinder seal kit for John Deere backhoe loaders and motor graders. Examples include a 210LE steering cylinder AH216821 and a 570B front-steering cylinder AH150023; the rod reference is 25 mm. On some backhoes, fitment is limited to non-MFWD machines or a specified rod guide:...

Product DescriptionT218502 is an aftermarket steering cylinder seal kit supplied by Ruijueparts. John Deere backhoe references include selected 310J, 310K, 310SJ, 310SK, 410J and 410K front-wheel-assist steering assemblies, including cylinder AT326542. The catalogue identifies a 40 mm rod and 65 mm bore for the listed assembly. Some sales pages reverse...