Product Description267-9166 is an aftermarket sealing ring referenced for matching Caterpillar wheeled-excavator axle applications. It is a separate component from rectangular ring 267-9167; similar part numbers do not establish interchangeability. Check the axle group and individual groove position before ordering. Ruijueparts can review the parts diagram and consolidate the required...

Product Description121-7639 is an aftermarket seal ring referenced for Caterpillar steering-axle applications on selected wheeled excavators. It should be ordered separately from backup ring 121-7637, even where both appear in the same axle repair. Match the exact assembly and sealing position before purchase. Ruijueparts can review a multi-part axle list...

Product Description9849963 is an aftermarket o-ring supplied by Ruijueparts. CNH lists this O-ring for reference dimensions of 50.46 mm inside diameter and 2.61 mm section, across CASE and New Holland catalogue channels. Catalogue availability across brands is not a blanket fit guarantee; identify the specific assembly before ordering. Ruijueparts offers...

Product Description5P8843 is an aftermarket pin lip seal for matched Caterpillar oscillating-joint applications, including listed motor-grader linkage positions. A greased pin joint has different requirements from a pressure cylinder gland, so use the assembly reference to identify the seal correctly. Check the pin and housing surfaces while the joint is...

Product Description This aftermarket 561-34-71580 brake backup ring is referenced in the front wheel brake sealing arrangement of selected Komatsu HD785-7 rigid mining dump trucks. It is a single brake-assembly component rather than a complete repair kit. The backup ring works with its specified mating seal to support the sealing...

Product Description 195-13-05230 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair-kit reference. It is used for torque converter maintenance on the D375A-6 crawler dozer powertrain. The torque converter transfers engine power into the transmission system, so this kit should be identified by its exact...

Product Description267-9167 is an aftermarket rectangular seal ring for matching Caterpillar wheeled-excavator assemblies. Its cross-section is a key part of the application, so a round O-ring of similar diameter should not be assumed suitable. Keep this reference separate from 267-9166 in an axle repair list and verify the exact groove...

Product Description8R-0957 is an aftermarket repair kit referenced for a matching Caterpillar air-over-hydraulic cylinder. The original application list includes 824C wheel dozers and 980C, 980F and 980F II wheel loaders. This is a specific cylinder service application, not a universal loader lift or tilt seal kit. Confirm the installed air-over-hydraulic...

Product Description86529541 is an aftermarket o-ring supplied by Ruijueparts. The original CNH reference identifies an O-ring with 32.91 mm inside diameter and 3.53 mm section. Its use must be matched to the specific joint in the parts diagram. Do not infer pressure or temperature ratings for this aftermarket item from...

Product Description161097A1 is an aftermarket o-ring supplied by Ruijueparts. The CASE Construction catalogue identifies this part as an individual O-ring and lists it in hydraulic service assemblies. The catalogue reference alone does not establish a universal excavator fit; supply the machine serial and diagram position. Neutral or customer-specified packaging is...

Product Description 17M-15-05110 is an aftermarket transmission service kit matched 1:1 to the original Komatsu repair kit reference. It is used for transmission service on specified D275A-5 and D275AX-5 crawler dozer configurations. This product belongs to the transmission assembly, while 17M-13-05040 is a separate torque converter service-kit reference; the two...

Product DescriptionH156587 is an aftermarket cylinder rod wiper seal supplied by Ruijueparts. Replacement catalogues identify a 40 mm rod wiper; the John Deere 1750 planter parts diagram lists H156587 within the cylinder service group. A wiper at the rod entrance has a different role from the pressure seal. Match the...

Product Description AT85197 is an aftermarket flat-face O-ring assortment kit for servicing compatible John Deere hydraulic connections. The reference kit contains 80 O-rings in eight common sizes, listed as 90-durometer O-rings for #4, #6, #8, #10, #12, #16, #20, and #24 fittings. It is intended for fitting-level maintenance, not for...

Product Description56B-33-11430 is an aftermarket seal for matching Komatsu equipment assemblies. The manufacturer parts listing identifies HM400-1, HM400-2, HM400-3, HM400-5 and WA800-8 applications. Check the assembly diagram and serial applicability before purchase, because the model name alone does not identify the sealing position. This is a seal component, not a...

Product Description4213311480 is an aftermarket seal referenced as 421-33-11480 in Komatsu replacement-parts catalogues. Listed equipment families include WA400, WA420, WA450 and WA470 loaders, plus HM250 and HM300 articulated trucks. These references guide identification rather than confirming every serial configuration. Match the exact assembly diagram and removed seal profile before ordering....

Product Description This aftermarket 561-33-71450 rear brake backup ring is referenced for the rear wheel and rear axle final brake assembly of selected Komatsu HD785-7 rigid mining dump trucks. It is an individual brake sealing-support component, not a complete seal kit or a standard O-ring. The ring is listed in...

Product Description267-8984 is an aftermarket O-ring referenced for Caterpillar wheeled-excavator axle sealing. It is distinct from 267-8985, which appears in related assemblies but has a different reference specification. Check the axle diagram and exact groove before purchase instead of treating the pair as interchangeable. Ruijueparts can review a list of...

Product Description267-8985 is an aftermarket O-ring referenced for the steering axle on selected Caterpillar wheeled excavators. It is an individual sealing component rather than a full axle repair kit. The nearby 267-8984 reference describes another ring, so verify the exact groove and original number before ordering. Ruijueparts can assist with...

Product Description The aftermarket 195-22-05030 service kit is referenced for the transmission control and steering-related service system of verified Komatsu D375A-6 track-type tractors. It should be treated as a control service kit, rather than a hydraulic cylinder repair kit or a full transmission overhaul gasket set. This distinction matters when...

Product Description2401-9144K is an aftermarket main pump O-ring kit listed in the Solar 170W-III main pump diagram. The diagram separates this sealing set from the regulator, rotary groups and pump assemblies, helping buyers distinguish a seal order from a larger overhaul. Verify the fitted pump and serial-specific parts information before...

Product Description This aftermarket 561-34-71590 brake backup ring is referenced for selected Komatsu HD785-7 rigid mining dump truck front wheel brake assemblies. It is a single sealing-support component within the brake system, not a hydraulic cylinder seal kit or a complete brake overhaul kit. A backup ring must be installed...

Product Description7100535 is an aftermarket dust seal o-ring supplied by Ruijueparts. The reference identifies a dust-excluding O-ring, so it should not be selected as a complete pressure-seal repair kit. Match the original service number, machine serial number and installed assembly before ordering. Custom sealing enquiries for older equipment can be...

Product Description 6I-2435 is an aftermarket replacement radiator spacer for selected Caterpillar cooling-system assemblies. This EPDM rubber component has an 80 mm inner diameter, a 108 mm outer diameter, and a 25 mm thickness. It creates the required clearance between the radiator and its mounting structure within radiator or aftercooler...

Product Description 17M-13-05040 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair kit reference. It is designed for service work on the torque converter assembly in a specified D275A-5D crawler dozer configuration. The torque converter transfers engine power through the powertrain, so its sealing components...