Product DescriptionVOE14664650 is an aftermarket dipper-arm cylinder seal kit referenced for Volvo EC480D and EC480E excavators. Published assembly lists identify cylinders 14629420 and 14629423, which help distinguish the arm service requirement from boom and bucket repairs. Match the installed cylinder and original kit reference before ordering, especially if the equipment...

Product DescriptionVOE14577802 is an aftermarket arm cylinder seal kit referenced for the Volvo EW145B wheeled excavator. The arm cylinder moves the dipper during digging, so its service kit should be identified separately from boom and bucket kits. Match the original kit number to the installed cylinder before planning the repair,...

Product DescriptionVOE14589135 is an aftermarket cylinder seal kit referenced for arm and selected bucket configurations on Volvo EC240C excavators. The catalogue lists a 100 mm rod and 140 mm bore, with cylinder references including 14551711, 14551714 and 14551719. Because this reference appears in more than one cylinder position, identify the...

Product DescriptionWhen servicing a bearing retention arrangement, use the complete 2P4471 reference rather than selecting a ring by appearance. Catalogued as 2P-4471, this aftermarket bearing nut lock is mechanical hardware for matching Caterpillar assemblies. It is not an O-ring or a hydraulic seal kit. Verify the mating nut and locating...

Product Description7100535 is an aftermarket dust seal o-ring supplied by Ruijueparts. The reference identifies a dust-excluding O-ring, so it should not be selected as a complete pressure-seal repair kit. Match the original service number, machine serial number and installed assembly before ordering. Custom sealing enquiries for older equipment can be...

Product Description154656A1 is an aftermarket o-ring supplied by Ruijueparts. The CNH dealer parts list identifies 154656A1 as an O-ring. It must be selected by the original service reference and matching groove. It is not a complete hydraulic cylinder kit. Do not use a general seal-kit illustration to determine supplied quantity....

Product Description 17M-13-05040 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair kit reference. It is designed for service work on the torque converter assembly in a specified D275A-5D crawler dozer configuration. The torque converter transfers engine power through the powertrain, so its sealing components...

Product Description267-8985 is an aftermarket O-ring referenced for the steering axle on selected Caterpillar wheeled excavators. It is an individual sealing component rather than a full axle repair kit. The nearby 267-8984 reference describes another ring, so verify the exact groove and original number before ordering. Ruijueparts can assist with...

Product Description154487A1 is an aftermarket o-ring supplied by Ruijueparts. The official CNH catalogue identifies 154487A1 as an O-ring, also referenced in New Holland construction service groups. The same reference may appear across brands, but that does not establish fit for every machine from either brand. Ruijueparts offers reference lookup through...

Product Description This aftermarket 561-33-71550 rear brake backup ring is referenced for selected Komatsu HD785-7 rear wheel and rear axle final brake assemblies. It is an individual sealing-support component used in the brake-piston arrangement, not a full brake repair kit or a standard O-ring. The correct component must be selected...

Product Description 180-27-11620 is an aftermarket final drive O-ring matched to the original Komatsu part-number reference. It is a single sealing component used in specified articulated dump truck final drive and brake hub assemblies, not a hydraulic cylinder repair kit or complete final drive seal kit. Its role is to...

Product Description This aftermarket 561-33-71471 brake backup ring is referenced for selected Komatsu HD785-7 front axle brake assemblies. It is an individual support ring in the brake sealing arrangement, not a complete brake seal kit or a standard O-ring. The reference is listed in both left- and right-hand front brake...

Product Description The aftermarket 195-22-05030 service kit is referenced for the transmission control and steering-related service system of verified Komatsu D375A-6 track-type tractors. It should be treated as a control service kit, rather than a hydraulic cylinder repair kit or a full transmission overhaul gasket set. This distinction matters when...

Product DescriptionFor transfer-gear bearing retention, 6V1071 is an aftermarket lock-washer reference used on matching Caterpillar equipment. The catalogue includes D9-family tractors and several road reclaimers, but compatibility still depends on the installed assembly. This component retains an adjusted nut; it is not a replacement for correct bearing adjustment or a...

Product Description85808278 is an aftermarket o-ring supplied by Ruijueparts. The dealer catalogue identifies 85808278 as the replacement for O-ring 73300801. Referenced tractor diagrams include CASE IH 2120 and 2130 steering-pump and hydraulic piping groups. This is an individual O-ring; confirm the exact diagram position and serial range before using an...

Product Description122-4575 is an aftermarket bearing lock washer referenced for Caterpillar transmission service on D10-family track-type tractors. It is locking hardware, so it should not be ordered as an oil seal or a cylinder repair kit. Match the original reference and the mating nut arrangement before assembly. A washer that...

Product Description This aftermarket 561-33-71450 rear brake backup ring is referenced for the rear wheel and rear axle final brake assembly of selected Komatsu HD785-7 rigid mining dump trucks. It is an individual brake sealing-support component, not a complete seal kit or a standard O-ring. The ring is listed in...

Product Description AH173410 is an aftermarket 80 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies AH173410 as a hydraulic cylinder piston, rather than a complete rod-and-bore seal kit. It is the piston-side assembly that provides sealing within compatible 80 mm bore cylinders. Published dimensions list a 30.58...

Product Description This aftermarket 561-34-71661 brake backup ring is referenced for the front axle brake assembly of selected Komatsu HD785-7 mining dump trucks. It is an individual sealing-support component, not a complete hydraulic cylinder repair kit. In a brake-piston sealing arrangement, a backup ring helps support the mating seal under...

Product Description This aftermarket 561-34-71580 brake backup ring is referenced in the front wheel brake sealing arrangement of selected Komatsu HD785-7 rigid mining dump trucks. It is a single brake-assembly component rather than a complete repair kit. The backup ring works with its specified mating seal to support the sealing...

Product Description 195-13-05230 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair-kit reference. It is used for torque converter maintenance on the D375A-6 crawler dozer powertrain. The torque converter transfers engine power into the transmission system, so this kit should be identified by its exact...

Product Description This aftermarket 561-33-71480 brake backup ring is referenced for the front wheel brake assembly of selected Komatsu HD785-7 rigid mining dump trucks. It is an individual sealing-support ring used within the brake assembly, rather than a complete seal kit or a standard O-ring. When the brake assembly is...

Product Description 17M-15-05121 is an aftermarket transmission control valve service kit matched 1:1 to the original Komatsu kit reference. It is used for servicing the transmission control valve on selected D155AX-5, D275A-5, and D275AX-5 crawler dozers. This valve manages transmission hydraulic circuits and gear-control functions within the powertrain; it is...

Product Description AH205062 is an aftermarket 100 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies it as a hydraulic cylinder piston, not a complete seal kit. This piston-side assembly incorporates sealing and bearing elements for cylinders built around its specific piston geometry. Published reference dimensions include a...