Product Description This aftermarket 561-34-71610 front brake seal is referenced in the front wheel wet brake assembly of selected Komatsu HD785-7 mining dump trucks. It is an individual internal brake service component, not a hydraulic cylinder seal, oil seal for general use, or a complete brake overhaul kit. The HD785-7...

Product DescriptionH156587 is an aftermarket cylinder rod wiper seal supplied by Ruijueparts. Replacement catalogues identify a 40 mm rod wiper; the John Deere 1750 planter parts diagram lists H156587 within the cylinder service group. A wiper at the rod entrance has a different role from the pressure seal. Match the...

Product Description 126-1876 is an aftermarket replacement cushion seal ring for selected Caterpillar hydraulic cylinder assemblies. It is an individual steel seal component, not a complete cylinder repair kit or a conventional O-ring. Reference dimensions are 95 mm OD × 89 mm ID × 6 mm axial height. Published cylinder-kit...

Product Description 5004398M91 is an aftermarket loader bucket cylinder seal kit referenced for Terex/Fermec backhoe loaders equipped with Pacoma cylinder 5000119M91. It repairs the front-loader bucket tilt/dump cylinder, which curls or dumps the front bucket; it is not the rear backhoe bucket cylinder kit. The verified reference size is 60...

Product Description231-6843 is an aftermarket hydraulic cylinder seal ring for selected Caterpillar equipment applications. This component number must be distinguished from 231-6844, which identifies a cylinder seal kit. For a workshop order, establish whether the job needs one replacement component or a wider reseal set, then check the installed cylinder...

Product Description This aftermarket 561-33-71430 front brake seal is referenced in the front axle wet brake assembly of selected Komatsu HD785-7 mining dump trucks. It is an individual internal brake seal used when the front wheel brake housing is dismantled and rebuilt. The item is not a friction disc, a...

Product Description This aftermarket 568-33-11531 wet disc brake packing is referenced for selected Komatsu wheel loader, mining dump truck, and wheel dozer brake assemblies. Komatsu identifies the component as “PACKING” within the wet brake system. It is an individual internal brake sealing component, not a complete brake repair kit, floating...

Product Description 195-13-05230 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair-kit reference. It is used for torque converter maintenance on the D375A-6 crawler dozer powertrain. The torque converter transfers engine power into the transmission system, so this kit should be identified by its exact...

Product Description7100535 is an aftermarket dust seal o-ring supplied by Ruijueparts. The reference identifies a dust-excluding O-ring, so it should not be selected as a complete pressure-seal repair kit. Match the original service number, machine serial number and installed assembly before ordering. Custom sealing enquiries for older equipment can be...

Product Description This aftermarket 561-34-71580 brake backup ring is referenced in the front wheel brake sealing arrangement of selected Komatsu HD785-7 rigid mining dump trucks. It is a single brake-assembly component rather than a complete repair kit. The backup ring works with its specified mating seal to support the sealing...

Product Description 17M-15-05110 is an aftermarket transmission service kit matched 1:1 to the original Komatsu repair kit reference. It is used for transmission service on specified D275A-5 and D275AX-5 crawler dozer configurations. This product belongs to the transmission assembly, while 17M-13-05040 is a separate torque converter service-kit reference; the two...

Product Description 6I-2435 is an aftermarket replacement radiator spacer for selected Caterpillar cooling-system assemblies. This EPDM rubber component has an 80 mm inner diameter, a 108 mm outer diameter, and a 25 mm thickness. It creates the required clearance between the radiator and its mounting structure within radiator or aftercooler...

Product Description154467A1 is an aftermarket o-ring supplied by Ruijueparts. CNH lists this O-ring with reference dimensions of 10.8 mm inside diameter and 2.4 mm section. Match both cross-section and groove; a similar-looking ring or nearby part number is not proof of compatibility. For older equipment, Ruijueparts can assess custom sealing...

Product Description9849963 is an aftermarket o-ring supplied by Ruijueparts. CNH lists this O-ring for reference dimensions of 50.46 mm inside diameter and 2.61 mm section, across CASE and New Holland catalogue channels. Catalogue availability across brands is not a blanket fit guarantee; identify the specific assembly before ordering. Ruijueparts offers...

Product Description7255578 is an aftermarket seal kit referenced for the two-speed hydrostatic drive motor on selected Bobcat compact track loaders. The original listing includes T450, T550, T590, T595, T62, T630, T64, T650, T66 and T76, subject to serial-number checks. Identify the installed motor before ordering, especially after a drive-motor replacement....

Product Description The aftermarket 195-22-05030 service kit is referenced for the transmission control and steering-related service system of verified Komatsu D375A-6 track-type tractors. It should be treated as a control service kit, rather than a hydraulic cylinder repair kit or a full transmission overhaul gasket set. This distinction matters when...

Product Description This aftermarket 561-34-71680 brake backup ring is referenced for selected Komatsu HD785-7 rigid mining dump truck front wheel brake assemblies. It is an individual backup ring within the brake sealing arrangement, not a complete seal kit or a general-purpose O-ring. During brake service, the ring must be matched...

Product Description7322754 is an aftermarket seal kit for matching single-speed hydrostatic drive motors on Bobcat compact track loaders. Bobcat lists T550, T590, T595, T630, T650 and T76 among the reference models, with fit dependent on the machine serial number. Check the motor fitted to the loader rather than selecting by...

Product Description70923596 is an aftermarket o-ring supplied by Ruijueparts. The Fiat-Allis 545/545H loader parts book lists this O-ring at the spindle-to-housing joint, with a 6.75 inch reference inside diameter. It is a single O-ring, not a hydraulic cylinder seal kit; check the axle diagram and housing configuration. For older equipment,...

Product Description85999136 is an aftermarket control valve lip seal supplied by Ruijueparts. New Holland loader-backhoe control-valve diagrams list this lip seal, with reference dimensions 17.6 mm ID, 26.84 mm OD and 5.42 mm thickness. One catalogue revision introduces this seal from September 1995; check the valve revision before replacing an...

Product Description154491A1 is an aftermarket o-ring supplied by Ruijueparts. CNH construction service group KG1RP618-00 lists 154491A1 as an individual O-ring among hydraulic line and valve components. Check the exact assembly and diagram position; do not treat all seals in the service group as interchangeable. Neutral or customer-specified packaging is available...

Product Description This aftermarket 561-33-71450 rear brake backup ring is referenced for the rear wheel and rear axle final brake assembly of selected Komatsu HD785-7 rigid mining dump trucks. It is an individual brake sealing-support component, not a complete seal kit or a standard O-ring. The ring is listed in...

Product Description This aftermarket 561-33-71550 rear brake backup ring is referenced for selected Komatsu HD785-7 rear wheel and rear axle final brake assemblies. It is an individual sealing-support component used in the brake-piston arrangement, not a full brake repair kit or a standard O-ring. The correct component must be selected...

Product Description Product Description 707-98-52140 is an aftermarket tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It services the specified crawler dozer blade tilt and tilt/pitch cylinders, helping maintain blade cross-slope adjustment during grading, leveling, and material spreading. This kit is associated with 70 mm...