Product Description267-8984 is an aftermarket O-ring referenced for Caterpillar wheeled-excavator axle sealing. It is distinct from 267-8985, which appears in related assemblies but has a different reference specification. Check the axle diagram and exact groove before purchase instead of treating the pair as interchangeable. Ruijueparts can review a list of...

Product Description8R-0957 is an aftermarket repair kit referenced for a matching Caterpillar air-over-hydraulic cylinder. The original application list includes 824C wheel dozers and 980C, 980F and 980F II wheel loaders. This is a specific cylinder service application, not a universal loader lift or tilt seal kit. Confirm the installed air-over-hydraulic...

Product Description 6592184 is an aftermarket boom cylinder seal kit for the Bobcat 907 Backhoe attachment. It is referenced to boom cylinder assembly 6592180 and a 1.5 in rod × 3.0 in bore configuration. The boom cylinder raises and lowers the main digging boom, while the 907 attachment uses separate...

Product Description Restore your machine's power with the 339-8229 Transmission Overhaul Gasket Kit from Ruijueparts. Specifically designed for the CAT 966H Wheel Loader, this comprehensive kit includes high-grade O-rings (214-7568, 3J-1907), shaft seals (193-2200), and piston lip seals (6P-7772, 7G-5675) required for a full power shift transmission rebuild. At Ruijueparts,...

Product Description 707-99-64210 is an aftermarket ripper tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It is used on the rear ripper tilt cylinder—not the blade tilt cylinder—of the specified D275A-5 crawler dozer cold-climate configuration. The kit is associated with cylinder references 707-01-0C190 and 707-01-0C200,...

Product Description87428627 is an aftermarket bucket cylinder seal kit referenced for New Holland loader-backhoe applications. A B95 loader bucket cylinder is one listed application; the cylinder number and machine serial range remain essential checks. Do not select a backhoe digging-bucket kit solely because it shares the word bucket. Ruijueparts can...

Product Description288-2552 is an aftermarket transmission gasket-kit reference for selected Caterpillar G-series motor graders. It addresses sealing work during transmission service, rather than supplying the gears or clutch friction components required for a mechanical overhaul. Confirm the installed transmission arrangement before purchase, especially where an exchange unit has been fitted....

Product Description241-1397 is an aftermarket transmission gasket-kit reference for Caterpillar 980C and 980F wheel-loader applications. It supports sealing work when the matched transmission is opened for service; it is not a replacement transmission or a set of drive gears. Verify the transmission arrangement and machine serial details before ordering. Ruijueparts...

Product Description 175-30-24223 is an aftermarket track adjuster seal kit reference for servicing the recoil and track-tension cylinder identified as 175-30-24223 in Komatsu parts listings. The original reference identifies the cylinder assembly, not an OEM seal-kit number; this listing therefore helps buyers source the corresponding aftermarket repair seals for that...

Product Description86900100 is an aftermarket lift piston o-ring supplied by Ruijueparts. Ford 2000 and 3000 tractor parts books list this lift piston O-ring, with a 2.600 inch inside diameter and 0.210 inch section. The piston backup ring is listed separately; this number does not identify a complete lift overhaul kit....

Product Description3L3313 is an aftermarket lip seal referenced for selected Caterpillar motor graders and marine engines. These are separate equipment applications, so a matching model family should be followed by an assembly-level check. Use the original number, also written 3L-3313, and identify the shaft sealing position before purchase. Ruijueparts supports...

Product Description86529541 is an aftermarket o-ring supplied by Ruijueparts. The original CNH reference identifies an O-ring with 32.91 mm inside diameter and 3.53 mm section. Its use must be matched to the specific joint in the parts diagram. Do not infer pressure or temperature ratings for this aftermarket item from...

Product Description AH173410 is an aftermarket 80 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies AH173410 as a hydraulic cylinder piston, rather than a complete rod-and-bore seal kit. It is the piston-side assembly that provides sealing within compatible 80 mm bore cylinders. Published dimensions list a 30.58...

Product DescriptionVOE12724304 is an aftermarket seal-kit reference for selected Volvo motor grader cylinders. Circle-turn applications are catalogued for 750A and 780A graders with cylinder 89011, making the cylinder reference a useful starting point for buyers maintaining older equipment. Check the machine serial number before ordering rather than relying on the...

Product Description12212125 is an aftermarket rod-side seal kit for the documented Liebherr R920 boom cylinder configuration. For a repair shop, the key buying decision is whether the leak is at the rod end or inside the cylinder: these service areas use separate kits. Check the installed cylinder identification before ordering,...

Product Description114-4850 is an aftermarket hoe-stick lip-type seal identified by its complete Caterpillar reference. This is a linkage sealing component, so a buyer should check the joint location rather than assume it is a hydraulic cylinder repair kit. Similar-looking pin seals can have different profiles and seating dimensions. Ruijueparts can...

Product Description Premium aftermarket 14X-13-05010 Torque Converter Service Kit for Komatsu D85E-SS-2, D65E-12, and D65PX-12. This repair kit includes high-quality seal rings, O-rings, and gaskets to restore torque converter efficiency. Ruijueparts offers custom solutions for vintage equipment and 30,000+ PN lookups to ensure a perfect fit for your bulldozer maintenance....

Product Description The aftermarket 195-22-05030 service kit is referenced for the transmission control and steering-related service system of verified Komatsu D375A-6 track-type tractors. It should be treated as a control service kit, rather than a hydraulic cylinder repair kit or a full transmission overhaul gasket set. This distinction matters when...

Product Description421-33-11440 is an aftermarket seal ring for a matching Komatsu wet disc brake assembly. It is an individual sealing component rather than a complete brake repair kit. The brake assembly and seal position are the key checks when purchasing; a similar-looking ring or nearby part number does not confirm...

Product Description2401-9118K is an aftermarket swing motor seal kit referenced for Doosan/Daewoo excavator repairs. Supplier listings include Solar 300 applications, while the motor identification is needed to confirm the correct version. This kit concerns upperstructure rotation, not track propulsion or a boom cylinder repair. Ruijueparts can help buyers check the...

Product Description3D8417 is an aftermarket rotating-shaft lip seal referenced for selected Caterpillar wheel loaders. The original reference is also formatted 3D-8417. It identifies a separate sealing component rather than a complete axle or transmission kit. Check the shaft interface and housing arrangement before ordering, because a loader uses several lip...

Product Description56B-33-11430 is an aftermarket seal for matching Komatsu equipment assemblies. The manufacturer parts listing identifies HM400-1, HM400-2, HM400-3, HM400-5 and WA800-8 applications. Check the assembly diagram and serial applicability before purchase, because the model name alone does not identify the sealing position. This is a seal component, not a...