Product Description 8G-4190 is an aftermarket equalizer bar seal for selected Caterpillar tracked equipment. Also called an E-bar seal, it is installed at equalizer bar end-pin or center-pin joints to retain grease while the undercarriage oscillates and to help exclude dirt and moisture. It is a single undercarriage sealing component,...

Product Description 287-33-11261 is an aftermarket wheel brake seal referenced for the Komatsu WS23S-2A motor scraper, S/N 3101-Up. The parts catalogue identifies it as one of several individual components included in brake service kit 287-33-05013. It should be ordered by its exact part number, not as a substitute for 287-33-11271...

Product Description 707-99-64210 is an aftermarket ripper tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It is used on the rear ripper tilt cylinder—not the blade tilt cylinder—of the specified D275A-5 crawler dozer cold-climate configuration. The kit is associated with cylinder references 707-01-0C190 and 707-01-0C200,...

Product Description79086720 is an aftermarket torque converter seal supplied by Ruijueparts. The CNH catalogue identifies a torque-converter seal with reference dimensions of 20.16 mm outside diameter and 1.43 mm thickness. This reference belongs to the transmission system, not a boom or bucket cylinder repair kit. Ruijueparts offers reference lookup through...

Product Description 17A-12-11270 is an aftermarket transmission damper oil seal matched to the original Komatsu part-number reference. It is a single sealing component used in the transmission damper assembly on specified crawler dozers, not a complete repair kit. The damper assembly is part of the powertrain, so this seal should...

Product Description9991976 is an aftermarket o-ring supplied by Ruijueparts. Original reference dimensions are 18.7 mm inside diameter and 1.7 mm section. This is an individual sealing ring, not a cylinder repair kit. Check the groove and original number; diameter alone does not establish the correct material. Ruijueparts offers reference lookup...

Product Description7225616 is an aftermarket swivel joint hydraulic seal supplied by Ruijueparts. The E20z swivel diagram identifies this individual hydraulic sealing reference separately from back-up ring 7225617 and complete kit 7300855. Match the original service number, machine serial number and installed assembly before ordering. Ruijueparts offers reference checks through its...

Product Description 561-34-71540 is an aftermarket rear wet brake seal for selected Komatsu HD785-7 rigid dump truck rear axle and final brake assemblies. It is an individual service component, not a complete brake seal kit. When servicing a wet brake, correct part identification matters because adjacent seals and backup rings...

Product Description114-4850 is an aftermarket hoe-stick lip-type seal identified by its complete Caterpillar reference. This is a linkage sealing component, so a buyer should check the joint location rather than assume it is a hydraulic cylinder repair kit. Similar-looking pin seals can have different profiles and seating dimensions. Ruijueparts can...

Product Description 5004401M91 is an aftermarket dipper cylinder seal kit for selected Terex/Fermec backhoe loaders. The dipper cylinder extends and retracts the rear excavating arm, so this kit is not interchangeable with the boom, bucket, swing or extendable-dipper kit. Service catalogues associate the reference with Pacoma cylinder 5000124M91 and a...

Product Description This aftermarket 428-33-11480 brake seal is referenced for selected Komatsu WA700 wheel loader wet brake assemblies. It is an individual internal brake sealing component installed with the brake piston arrangement; it is not a hydraulic cylinder seal kit, floating seal assembly, or complete brake repair kit. On WA700...

Product Description 5004398M91 is an aftermarket loader bucket cylinder seal kit referenced for Terex/Fermec backhoe loaders equipped with Pacoma cylinder 5000119M91. It repairs the front-loader bucket tilt/dump cylinder, which curls or dumps the front bucket; it is not the rear backhoe bucket cylinder kit. The verified reference size is 60...

Product Description904/09400 is an aftermarket piston seal for matching JCB Hydra Clamp applications on 3CX and 4CX backhoe loaders. This is an individual clamp seal, not a complete boom, bucket or stabilizer cylinder repair kit. Check the clamp assembly reference and the removed seal profile before purchase, as other clamp...

Product Description 4P-9943 is an aftermarket EPDM rubber radiator end-tank seal for selected Caterpillar cooling-system assemblies. Also identified as a radiator fan-side end-tank seal, this 121 mm × 140 mm × 22.5 mm component is used during radiator service to seal the designated end-tank connection. It is not a hydraulic...

Product Description70923596 is an aftermarket o-ring supplied by Ruijueparts. The Fiat-Allis 545/545H loader parts book lists this O-ring at the spindle-to-housing joint, with a 6.75 inch reference inside diameter. It is a single O-ring, not a hydraulic cylinder seal kit; check the axle diagram and housing configuration. For older equipment,...

Product Description180-00198 is an aftermarket rod seal referenced for Doosan equipment. It is an individual sealing component, so it should not be ordered as a complete hydraulic cylinder repair kit. Confirm the original reference and the assembly being serviced, then compare the seal profile and dimensions before installation. Ruijueparts offers...

Product Overview The 417509 oil seal is a multi‑lip nitrile shaft seal designed to prevent lubricant leakage and keep contaminants out in rotating equipment. It’s widely used as an industrial oil and grease sealing solution in aftermarket applications, ideal for heavy‑duty machinery maintenance and repair. Product Details: Part Name:  417509...

Product Description2401-9144K is an aftermarket main pump O-ring kit listed in the Solar 170W-III main pump diagram. The diagram separates this sealing set from the regulator, rotary groups and pump assemblies, helping buyers distinguish a seal order from a larger overhaul. Verify the fitted pump and serial-specific parts information before...

Product Description This aftermarket 561-33-71440 front brake seal is referenced for the front wheel brake assembly of selected Komatsu HD785-7 mining dump trucks. It is an individual brake-housing sealing component, used between internal mating parts in the front axle brake arrangement. This item is not a friction plate, a hydraulic...

Product Description 332/Y8994 is an aftermarket hydraulic seal kit referenced for the rear excavator bucket cylinder, also called the crowd ram, on selected JCB backhoe loaders. This is an important distinction for service teams: the “bucket cylinder” in this application operates the rear digging bucket’s curl movement, not the front...

Product Description This aftermarket 561-33-71430 front brake seal is referenced in the front axle wet brake assembly of selected Komatsu HD785-7 mining dump trucks. It is an individual internal brake seal used when the front wheel brake housing is dismantled and rebuilt. The item is not a friction disc, a...

Product DescriptionRE20342 is an aftermarket piston seal supplied by Ruijueparts. John Deere 315SG backhoe loader stabilizer cylinder, serial numbers through 944155, is one documented application; replacement catalogues identify a 70 mm bore seal. The piston seal is only one item in the bore repair group. It should not be ordered...