Product Description 707-99-66620 is an aftermarket blade tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It services the specified 180 mm bore × 100 mm rod tilt cylinder, reference 707-01-0C800, on D275A-5D crawler dozers with the cold-climate configuration. The tilt cylinder changes blade cross-slope during...
Product Description 10X0197 is an aftermarket boom cylinder seal kit referenced for Terex Vectra TX760 backhoe loaders. It is used to service the hydraulic boom ram and is also cited in published aftermarket references as SSP5087. Because backhoe-loader cylinders can differ by cylinder manufacturer, production revision, and boom configuration, buyers...
Product Description 10X0155 is an aftermarket loader bucket tilt cylinder seal kit for Terex Vectra TX760 backhoe loaders, commonly cross-referenced as SSP5092. It services the front loader bucket tilt cylinder that curls and dumps the loader bucket; it is not for the rear excavator bucket cylinder. Published TLB 740S parts...
Product Description Aftermarket VOE14514455 boom cylinder seal kit for selected Volvo EC240B crawler-excavator configurations, including LC, LR, NLC, and FX variants where the specified cylinder is installed. It reseals the boom cylinder that extends to raise the boom and retracts to lower it during digging, lifting, and loading. Reference dimensions...
Product Description RH418-71290 is an aftermarket boom swing cylinder seal kit for Kubota U27-4 and U27-4CA compact excavators. Catalogues may describe this application simply as a swing cylinder; on this machine it is associated with the boom offset function, which moves the boom left or right for work close to...
Product Description21N-30-16190 is an aftermarket O-ring identified by its complete Komatsu reference. The manufacturer catalogue classifies the reference as an O-ring, so this offer should not be confused with a floating seal assembly or a complete hydraulic repair kit. Confirm the installed assembly and the groove location before ordering. A...
Product Description RH418-71590 is an aftermarket bucket cylinder seal kit for Kubota U27-4 compact excavators, with U27-4CA included in aftermarket application references. This repair kit reference is associated with the bucket cylinder and a 40 mm rod × 65 mm bore. The bucket cylinder controls attachment curl and dump movement,...
Product Description 5004400M91 is an aftermarket backhoe boom cylinder seal kit referenced for Terex/Fermec backhoe loaders equipped with Pacoma cylinder 5000121M91. The catalogued cylinder size is 65 mm rod × 115 mm bore. This distinction matters: a boom kit is not interchangeable with the dipper, swing, bucket, stabilizer, or front-loader...
Product Description Looking for a reliable replacement to stop your backhoe's boom drift? Our 13762437 boom cylinder seal kit is specifically engineered for the SANY BHL75 backhoe loader. At Ruijueparts, we understand that precision is key to preventing hydraulic leaks and ensuring maximum lifting power. This high-quality aftermarket kit includes...
Product Description9991976 is an aftermarket o-ring supplied by Ruijueparts. Original reference dimensions are 18.7 mm inside diameter and 1.7 mm section. This is an individual sealing ring, not a cylinder repair kit. Check the groove and original number; diameter alone does not establish the correct material. Ruijueparts offers reference lookup...
Product Description 87038297 is an aftermarket lift cylinder seal kit reference for Case and New Holland farm loaders. Parts diagrams identify it at the lift cylinder, including versions marked “head with flats” or 35.701.010 on some loaders. This matters because one loader family may have earlier and later cylinder arrangements...
Product Description2401-9148KT is an aftermarket pump seal-kit reference described in the parts catalogue as body, regulator and control-spring sealing. This scope matters when planning a pump repair: confirm which sections will be opened and compare the required seals with the supplied kit list. Exact machine compatibility should be checked from...
Product Description9L5650 is an aftermarket O-ring reference used in selected Caterpillar grader and engine applications. It is a separate sealing ring, not a complete engine or transmission gasket set. Match the original reference and its groove position before ordering; colour and overall appearance do not establish size or material suitability....
Product Description 2440-9122KT is an aftermarket boom cylinder seal kit matched 1:1 to the original Doosan/Daewoo repair-kit reference. It is listed for the boom hydraulic cylinder on Solar 170-III and Solar 170W-III excavators, also shown as S170W-3 in aftermarket catalogues. The application has an 80 mm rod and 115 mm...
Product Description 707-99-65410 is an aftermarket lift cylinder seal kit for selected Komatsu wheel loader and compactor applications. It is listed as a lift seal kit for the WA470-3 and occurs in service-kit catalogues for WA450, WA450L, WA470 and WF450 equipment. The lift cylinder raises and holds the loader linkage,...
Product Description This aftermarket 991/00061 loader lift cylinder seal kit is referenced for selected JCB backhoe loader lift rams with a 50 mm piston rod and 80 mm cylinder bore. It is commonly listed for later serial applications from M320000 onward, making serial-number verification essential when distinguishing it from earlier...
Product Description904/09400 is an aftermarket piston seal for matching JCB Hydra Clamp applications on 3CX and 4CX backhoe loaders. This is an individual clamp seal, not a complete boom, bucket or stabilizer cylinder repair kit. Check the clamp assembly reference and the removed seal profile before purchase, as other clamp...
Product Description0654715 is an aftermarket blade cylinder seal kit referenced for the Hitachi EX40U mini excavator. The checked replacement catalogue identifies dozer cylinder 4391327, with a 60 mm rod and 110 mm bore, for the listed serial range. Retain the leading zero when sending the part number and verify the...
Product DescriptionRE20342 is an aftermarket piston seal supplied by Ruijueparts. John Deere 315SG backhoe loader stabilizer cylinder, serial numbers through 944155, is one documented application; replacement catalogues identify a 70 mm bore seal. The piston seal is only one item in the bore repair group. It should not be ordered...
Product Description6810813 is an aftermarket swivel joint oil seal supplied by Ruijueparts. The original service reference uses a two-piece seal arrangement between the swivel spool and barrel; the assembly can require several of these seals. Match the original service number, machine serial number and installed assembly before ordering. Neutral or...
Product Description This aftermarket 561-33-71471 brake backup ring is referenced for selected Komatsu HD785-7 front axle brake assemblies. It is an individual support ring in the brake sealing arrangement, not a complete brake seal kit or a standard O-ring. The reference is listed in both left- and right-hand front brake...
Product Description Eliminate fluid leaks and restore precision control with this premium aftermarket 991/00099 hydraulic cylinder seal kit, optimized for compact JCB machinery. Engineered specifically for standard rams with a 40mm rod diameter and 70mm bore size, this replacement kit features industrial-grade PU, NBR, and PTFE components built to endure...
Regular price
$9.23
Regular priceSale price
$9.23
Unit price/ per
Choosing a selection results in a full page refresh.
