Product DescriptionVOE14552494 is listed as a seal reference for Volvo equipment and is offered here as an aftermarket replacement enquiry. The available identification does not establish a complete cylinder kit, an exact equipment model or a confirmed installation position. Compare the original part number and component details before ordering. Ruijueparts...
Product Description 10X0241 is an aftermarket dipper cylinder seal kit for the Terex Vectra TX760 backhoe loader, commonly cross-referenced as SSP5088. It services the rear excavator arm, also called the dipper or stick hydraulic cylinder; it is not for the boom, excavator bucket, or front loader tilt cylinder. This distinction...
Product Description This aftermarket 561-34-71680 brake backup ring is referenced for selected Komatsu HD785-7 rigid mining dump truck front wheel brake assemblies. It is an individual backup ring within the brake sealing arrangement, not a complete seal kit or a general-purpose O-ring. During brake service, the ring must be matched...
Product DescriptionRE20342 is an aftermarket piston seal supplied by Ruijueparts. John Deere 315SG backhoe loader stabilizer cylinder, serial numbers through 944155, is one documented application; replacement catalogues identify a 70 mm bore seal. The piston seal is only one item in the bore repair group. It should not be ordered...
Product DescriptionFor bucket-cylinder rod-end repairs, 12212134 is offered as an aftermarket replacement kit for the referenced Liebherr R920 application. Confirm the cylinder number rather than relying on the machine name or a similar-looking seal set. The rod-side kit must not be confused with the piston kit when planning a rebuild....
Product Description9595508 is an aftermarket piston-side seal kit with reference applications in several Liebherr mining-cylinder configurations. Its use is not limited to a single boom or bucket position, so the installed cylinder number is the most useful starting point for a purchasing check. Confirm the machine configuration and any separate...
Product Description 4660834 is an aftermarket hydraulic cylinder seal kit for selected Hitachi large mining excavators. Verified catalogue records place it in EX3600-6 and EX3600E-6LD boom-cylinder groups, plus selected EX5500 arm/stick-cylinder groups. “Loader” or “front shovel” in some catalogues describes the excavator front attachment arrangement, not a wheel loader. Quote...
Product Description 535-1471 is an aftermarket boom cylinder seal kit reference for Caterpillar mining hydraulic shovels. An independent mining seal-kit guide maps this reference to cylinder group 471-2158 on 6050 and 6050 FS machines and to boom/backhoe cylinder groups 459-2031 and 471-2158 on 6060. The listed cylinder size is a...
Product Description21N-30-00090 is an aftermarket floating seal assembly referenced for Komatsu undercarriage sealing applications. The reference identifies a face-seal assembly, not a hydraulic cylinder rebuild kit. Match the original number and the serviced assembly before ordering; similar ring diameters do not establish interchangeability. Check the mating surfaces and installation procedure...
Product Description85802570 is an aftermarket swing cylinder seal kit supplied by Ruijueparts. New Holland 555E, 575E, 655E and 675E swing-cylinder diagrams list this kit. Selected LB models specify welded-trunnion cylinders before serial 31024290. Check the trunnion construction and serial range; later swing assemblies may use different service kits. Ruijueparts offers...
Product DescriptionVOE12724303 is an aftermarket cylinder seal kit with a published circle-shift application for Volvo motor graders. Cylinder reference 89013 is a useful starting point when checking the installed assembly; a grader model alone does not identify every cylinder configuration. Confirm the original kit number and cylinder details before ordering...
Product DescriptionVOE11988358 is an aftermarket boom cylinder seal kit with reference applications on Volvo EC25 and ECR28 compact excavators. The boom cylinder raises and lowers the main digging boom; the dipper, bucket and blade have separate service requirements. ECR28 parts literature identifies the kit in the boom-cylinder group, while EC25...
Product DescriptionVOE14522992 is an aftermarket quick-fit cylinder seal kit referenced for selected Volvo EC330C, EC360B/C and EC460B/C excavators. The catalogue links it to cylinder 14522371, serving the attachment coupling mechanism rather than the digging boom or bucket cylinder. Confirm the coupler and cylinder identification before purchase, especially if a different...
Product DescriptionMMV80780 is an aftermarket arm cylinder seal kit for matching CASE excavator applications. Parts listings identify it in arm or dipper cylinder groups, including CX240BLR, CX250C long-reach and CX300C references. Match the cylinder assembly and serial-specific diagram before ordering; a model name alone does not establish fit. Ruijueparts offers...
Product DescriptionWhen servicing a bearing retention arrangement, use the complete 2P4471 reference rather than selecting a ring by appearance. Catalogued as 2P-4471, this aftermarket bearing nut lock is mechanical hardware for matching Caterpillar assemblies. It is not an O-ring or a hydraulic seal kit. Verify the mating nut and locating...
Product DescriptionVOE14589172 is an aftermarket hydraulic cylinder seal kit referenced for Volvo EW145B wheeled excavators. Published parts lists associate it with cylinder references VOE14527197 and VOE14564218, which provide a more useful purchasing check than the machine name alone. Compare the installed cylinder identification and original kit number before disassembly or...
Product Description AH148785 is an aftermarket boom cylinder seal kit reference for John Deere 200LC crawler excavators. Published cylinder tables identify it for both the left-hand boom cylinder AH148792 and right-hand boom cylinder AH148782. The published cylinder dimensions are an 85 mm rod and a 120 mm bore. This is...
Product Description 381-2331 is an aftermarket hydraulic cylinder seal kit for selected Caterpillar 950H and 962H wheel loaders. This standard-size cylinder kit supports complete reseal work on the applicable cylinder group and includes reference components such as a buffer seal, U-cup seal, double-lip wiper, piston seal, wear ring, backup ring,...
Product Description RG638-67540 is an aftermarket boom cylinder seal kit referenced for selected Kubota compact excavator variants, including KX101-3 Alpha and U35-3 Alpha applications. Catalogue data identifies it as a boom-cylinder kit with a 45 mm rod and 85 mm bore reference. It must not be marketed as a dipper/arm...
Product Description 707-99-65410 is an aftermarket lift cylinder seal kit for selected Komatsu wheel loader and compactor applications. It is listed as a lift seal kit for the WA470-3 and occurs in service-kit catalogues for WA450, WA450L, WA470 and WF450 equipment. The lift cylinder raises and holds the loader linkage,...
Product Description2274-6014AKT is an aftermarket track adjuster seal kit referenced in the S470LC-V track spring parts group. It services sealing associated with track tension adjustment, rather than the hydraulic travel motor that drives the tracks. Confirm the adjuster assembly and machine serial details before purchase, and compare the required sealing...
Product DescriptionGG190-32388 is an aftermarket cylinder seal kit supplied by Ruijueparts. John Deere skid-steer references include 60, 70 and 90 lift/tilt applications; catalogue assembly examples include GG170-32599 and GG170-38876 on model 90. Older skid steers have serial-dependent cylinders. Compare the assembly and the 1 inch rod / 2 inch bore...
Product Description This aftermarket 561-33-71471 brake backup ring is referenced for selected Komatsu HD785-7 front axle brake assemblies. It is an individual support ring in the brake sealing arrangement, not a complete brake seal kit or a standard O-ring. The reference is listed in both left- and right-hand front brake...
Regular price
$179.10
Regular priceSale price
$179.10
Unit price/ per
Choosing a selection results in a full page refresh.
