Product Description This aftermarket 561-33-71550 rear brake backup ring is referenced for selected Komatsu HD785-7 rear wheel and rear axle final brake assemblies. It is an individual sealing-support component used in the brake-piston arrangement, not a full brake repair kit or a standard O-ring. The correct component must be selected...

Product Description This aftermarket 561-33-71480 brake backup ring is referenced for the front wheel brake assembly of selected Komatsu HD785-7 rigid mining dump trucks. It is an individual sealing-support ring used within the brake assembly, rather than a complete seal kit or a standard O-ring. When the brake assembly is...

Product Description The 216-5361 aftermarket transmission overhaul gasket kit is supplied for Caterpillar-compatible 950 wheel loaders and 966C wheel loaders. It supports transmission overhaul work by replacing applicable gaskets, seals, and O-rings at specified service interfaces, helping restore sealing integrity after correct assembly. This part number is commonly cross-referenced as...

Product DescriptionFor a transmission resealing job, 9W-9371 is an aftermarket external lip-type piston seal referenced for selected Caterpillar equipment. It is an individual component and should remain separate from other transmission-ring numbers in a purchasing list. Check the transmission arrangement, piston location and machine serial details before ordering. Ruijueparts can...

Product Description This aftermarket 561-34-71680 brake backup ring is referenced for selected Komatsu HD785-7 rigid mining dump truck front wheel brake assemblies. It is an individual backup ring within the brake sealing arrangement, not a complete seal kit or a general-purpose O-ring. During brake service, the ring must be matched...

Product Description8E5742, catalogued as 8E-5742, is an aftermarket internal sealing ring for matching Caterpillar transmission assemblies. It differs from the external piston-seal references often listed beside it in overhaul parts lists. Match the internal sealing position and original number rather than choosing by a similar photograph. Ruijueparts can review a...

Product Description VOE4789826, also referenced as 4789826, is an aftermarket wheel rim O-ring for selected Volvo construction equipment. It is a single sealing ring used in specified front or rear wheel-rim assemblies, rather than a hydraulic cylinder repair kit or a complete multi-piece seal kit. In the applicable rim configuration,...

Product Description This aftermarket 561-34-71661 brake backup ring is referenced for the front axle brake assembly of selected Komatsu HD785-7 mining dump trucks. It is an individual sealing-support component, not a complete hydraulic cylinder repair kit. In a brake-piston sealing arrangement, a backup ring helps support the mating seal under...

Product Description Looking for a reliable 1113301 hydraulic seal replacement? This high-quality aftermarket oil seal is precision-engineered to fit Caterpillar (CAT) heavy equipment. Designed for durability under high-pressure conditions, it prevents hydraulic fluid leakage and extends the service life of your machine's pumps and cylinders. As a specialized aftermarket supplier,...

Product Description The 216-5358 Transmission Overhaul Gasket Kit is an aftermarket replacement for power shift transmissions in Caterpillar wheel loaders. Verified models include 950B, 950E, 950F, and 950F II. It supports disassembly, inspection, resealing, and reassembly during transmission overhaul. Contents may include gaskets, O-rings, and seal types; confirm the packing...

Product DescriptionH156587 is an aftermarket cylinder rod wiper seal supplied by Ruijueparts. Replacement catalogues identify a 40 mm rod wiper; the John Deere 1750 planter parts diagram lists H156587 within the cylinder service group. A wiper at the rod entrance has a different role from the pressure seal. Match the...

Product Description7D8436, catalogued as 7D-8436, is an aftermarket D-ring seal for matching Caterpillar transmission applications. Its cross-section differs from a conventional round O-ring, so the groove and original reference are important when ordering. Listed grader families use several transmission seals that should not be treated as interchangeable. Ruijueparts can help...

Product Description7100535 is an aftermarket dust seal o-ring supplied by Ruijueparts. The reference identifies a dust-excluding O-ring, so it should not be selected as a complete pressure-seal repair kit. Match the original service number, machine serial number and installed assembly before ordering. Custom sealing enquiries for older equipment can be...

Product Description267-9166 is an aftermarket sealing ring referenced for matching Caterpillar wheeled-excavator axle applications. It is a separate component from rectangular ring 267-9167; similar part numbers do not establish interchangeability. Check the axle group and individual groove position before ordering. Ruijueparts can review the parts diagram and consolidate the required...

Product Description 2R-0239 is an aftermarket NBR O-ring replacement referenced by Caterpillar as a 278.99 mm inside-diameter seal. Its listed cross-section is 3.53 mm (0.139 in), with a 75A nitrile material designation and a Dash Size 276 reference. This is an individual O-ring, not a hydraulic cylinder seal kit. It...

Product Description093-1434 is an aftermarket lip-type seal referenced for Caterpillar excavator linkage applications. It is a separate sealing component rather than a complete hydraulic cylinder kit. Match the specified joint and original reference before ordering; the same machine can use different seals at neighbouring pivot positions. Ruijueparts can help review...

Product Description167-2457 is an aftermarket cylinder wiper seal referenced for several Caterpillar equipment families. A wiper serves the rod entry area and is only one component of a cylinder sealing arrangement; it should not be mistaken for a full repair kit. Check the original number and gland location before ordering,...

Product Description21N-30-16190 is an aftermarket O-ring identified by its complete Komatsu reference. The manufacturer catalogue classifies the reference as an O-ring, so this offer should not be confused with a floating seal assembly or a complete hydraulic repair kit. Confirm the installed assembly and the groove location before ordering. A...

Product Description 17M-15-05121 is an aftermarket transmission control valve service kit matched 1:1 to the original Komatsu kit reference. It is used for servicing the transmission control valve on selected D155AX-5, D275A-5, and D275AX-5 crawler dozers. This valve manages transmission hydraulic circuits and gear-control functions within the powertrain; it is...

Product Description 180-27-11620 is an aftermarket final drive O-ring matched to the original Komatsu part-number reference. It is a single sealing component used in specified articulated dump truck final drive and brake hub assemblies, not a hydraulic cylinder repair kit or complete final drive seal kit. Its role is to...

Product Description242-6833 is an aftermarket hydraulic cylinder seal ring, supplied as a component reference rather than a complete cylinder repair kit. It is relevant to selected Caterpillar excavator and material-handling applications. When buying an individual ring, compare the original part number and the installed groove arrangement before deciding what else...

Product Description 126-1876 is an aftermarket replacement cushion seal ring for selected Caterpillar hydraulic cylinder assemblies. It is an individual steel seal component, not a complete cylinder repair kit or a conventional O-ring. Reference dimensions are 95 mm OD × 89 mm ID × 6 mm axial height. Published cylinder-kit...

Product Description161097A1 is an aftermarket o-ring supplied by Ruijueparts. The CASE Construction catalogue identifies this part as an individual O-ring and lists it in hydraulic service assemblies. The catalogue reference alone does not establish a universal excavator fit; supply the machine serial and diagram position. Neutral or customer-specified packaging is...

Product Description The aftermarket 195-22-05030 service kit is referenced for the transmission control and steering-related service system of verified Komatsu D375A-6 track-type tractors. It should be treated as a control service kit, rather than a hydraulic cylinder repair kit or a full transmission overhaul gasket set. This distinction matters when...