Product Description Keep your Komatsu dozers operating at peak hydraulic efficiency with the 707-99-56690 Blade Lift Cylinder Seal Kit. Specifically engineered for the D375A-5D (Serial No. 17743 and up), this high-performance kit is indispensable for preventing fluid leakage and maintaining consistent blade thrust. Designed to meet OEM standards, it features...

Product Description708-1U-00162K is the ordering reference for an aftermarket sealing kit supplied for a matching Komatsu 708-1U-00162 hydraulic pump. The number without K identifies the pump assembly, not an original seal-kit number. This offer supplies the repair seals rather than a complete pump. Verify the pump nameplate and assembly reference...

Product Description 61281-000 is an aftermarket replacement shaft seal kit for selected Danfoss Char-Lynn 4000 Series hydraulic motors with a -006 design level. It is intended for servicing the motor’s shaft-end sealing area when leakage is found around the output shaft. Before ordering, confirm the complete motor model code and...

Product Description 707-99-96130 is an aftermarket dump cylinder seal kit referenced for the Komatsu WA900-3 wheel loader. It is used to service the hydraulic cylinder that rotates the loader bucket for dumping and rollback, helping restore sealing performance when oil leakage or pressure loss affects bucket control. The original part-number...

Product Description This aftermarket 991/00016 loader lift cylinder seal kit is referenced for selected JCB backhoe loader applications using a 50 mm rod and 80 mm cylinder bore. It is intended for restoring the sealing function of the loader lift ram during repair, where oil leakage, damaged wipers, or pressure...

Product Description2401-9278KT is an aftermarket travel motor seal kit listed for selected Doosan Solar 55W applications. The travel motor drives machine movement; its sealing parts are separate from the swing motor and digging cylinders. Check the installed motor identification and the complete kit reference before ordering, especially if the drive...

Product Description The aftermarket 721-98-00600 steering cylinder seal kit is referenced for verified Komatsu HD785-7 off-highway dump truck steering-cylinder service. It supports seal replacement when cylinder leakage or internal sealing wear is found during heavy-duty truck maintenance. This part should be identified by the part number and the installed steering...

Product Description 707-99-65410 is an aftermarket lift cylinder seal kit for selected Komatsu wheel loader and compactor applications. It is listed as a lift seal kit for the WA470-3 and occurs in service-kit catalogues for WA450, WA450L, WA470 and WF450 equipment. The lift cylinder raises and holds the loader linkage,...

Product Description2401-9154K is an aftermarket main pump seal kit referenced for Doosan/Daewoo Solar 280LC-III applications. Its purpose is pump sealing; it should not be selected for a travel motor simply because another kit has a similar number. Keep the complete K-suffix reference and compare it with the installed pump service...

Choose the seal kit of Ruijueparts. Slash costly downtime.Fits equipment: 420E, 430E Condition: New – Open box: A new, unused item Brand: CATERPILLAR replacementTarget Audience: Customers with long-term procurement needs for sealing kits, including repair shops, distributors, import/export trading companies, and construction machinery rental companies.

Product Description6162-63-1515 is an aftermarket water pump seal for matching Komatsu engine cooling pumps. Replacement catalogues identify this reference for selected S6D170 and SA6D170 engine applications, but the pump assembly must also match. It is a sealing component rather than a complete water pump or hydraulic cylinder repair kit. Before...

Product Description231-0898 is an aftermarket hydraulic cylinder seal kit referenced for selected Caterpillar wheel loaders and the IT24F integrated toolcarrier. Before placing a maintenance order, identify the cylinder being rebuilt and compare its group number with the original kit reference. A loader model can use several cylinder configurations, and a...

Product Description 132-6783 is an aftermarket hydraulic blade lift cylinder seal kit for Caterpillar D11N and D11R crawler dozers. It services the left- or right-hand dozer lift cylinders that raise and lower the blade; it is not the blade tilt, ripper or pin-puller kit. Published catalogues identify cylinder 4T2727 for...

Product DescriptionAL110917 is an aftermarket steering cylinder gasket kit supplied by Ruijueparts. John Deere lists 6800, 6810, 6900, 6910 and 6910S for this steering-cylinder gasket reference; confirm the actual assembly and serial applicability. Do not confuse a steering-column repair with a steering-cylinder kit. The original product listing identifies the cylinder...

Product Description 6816325 is an aftermarket hydraulic cylinder seal kit for selected Bobcat compact excavator arm and swing-cylinder applications. Catalogues identify a 1.5 in rod × 3.0 in bore reference and show that the same kit number can serve different cylinder functions by model and serial range. It should not...

Product Description 6803334 is an aftermarket tilt cylinder seal kit referenced for selected Bobcat skid-steer and mini track loaders. It services the hydraulic cylinder that rolls the bucket or attachment forward and back, helping restore controlled tilt movement when seal wear causes leakage or pressure loss. This reference is commonly...

Product Description RH418-71290 is an aftermarket boom swing cylinder seal kit for Kubota U27-4 and U27-4CA compact excavators. Catalogues may describe this application simply as a swing cylinder; on this machine it is associated with the boom offset function, which moves the boom left or right for work close to...

Product Description 3657807M91 is an aftermarket power steering ram seal kit for selected Massey Ferguson 4WD tractors. Also referenced as 3765414M91, this kit is used to reseal the applicable 32 mm steering-cylinder ram and support front-axle steering repair. It is not intended as a universal lift-cylinder or hydraulic-pump seal kit....

Product Description Description: 5J0964-3K is an aftermarket reference for a U-cup rod seal assembly based on Caterpillar reference 5J-0964. The original 5J-0964 is designed to replace legacy Chevron packing in selected hydraulic cylinder rod-end grooves. It is a rod-side sealing component, not a complete hydraulic cylinder overhaul kit. The fitment...

Product Description2401-9234KT is an aftermarket travel motor seal kit referenced for the Doosan Solar 220LC-V. It is used when servicing sealing in the hydraulic motor that drives the machine, not the motor that swings the upperstructure. Match the full kit number to the installed motor and check the machine serial...

Product Description2401-9228KT is an aftermarket travel motor seal kit listed for Doosan Solar 450LC applications. It should be matched to the installed drive motor rather than selected from an unrelated Solar model family. Check the motor identification, original repair reference and machine serial number before purchase, particularly on equipment with...