Product Description2401-9099K is an aftermarket swing motor seal-kit reference for matched Doosan/Daewoo applications. Some parts lists abbreviate the description to O-ring, while seal-kit suppliers identify it as a kit; confirm the required component list rather than ordering by the illustration alone. Use the full reference and motor identification for the...

Product Description2442046 is an aftermarket hydraulic cylinder seal-kit reference listed for Caterpillar D8N applications. It should be matched to the installed cylinder rather than selected solely because a machine belongs to the D8 family. Check the cylinder identification and original sealing reference, particularly on equipment that has had a replacement...

Product DescriptionVOE11990405 is an aftermarket tilt cylinder seal kit referenced for Volvo L120B wheel loaders. The replacement catalogue associates it with cylinder 11088046, which controls bucket rollback and dumping through the loader linkage. It is a different service reference from the lift kit used to raise the loader arms. Ruijueparts...

Product DescriptionFor an EC140D bucket-cylinder repair, VOE14589125 provides an aftermarket service reference to check against the installed Volvo assembly. The bucket cylinder curls and uncurls the bucket; it should not be confused with the boom or arm cylinder. Confirm the cylinder identification and machine serial number before ordering, especially when...

Product Description2401-9225KT is an aftermarket main hydraulic pump seal kit referenced for selected Doosan Solar 220LC-V applications. The pump feeds the hydraulic system during digging and machine movement; this kit is separate from cylinder or motor seal kits. Confirm the pump identification and complete kit reference, including the suffix, before...

Product Description2K0715 is an aftermarket axle-housing thrust washer, also written 2K-0715. Its purpose is mechanical axial support rather than fluid sealing, so it should not be purchased as an oil seal. Match the washer position, mating components and original reference when servicing the axle. The catalogue covers several loader and...

Product Description This aftermarket 561-33-71550 rear brake backup ring is referenced for selected Komatsu HD785-7 rear wheel and rear axle final brake assemblies. It is an individual sealing-support component used in the brake-piston arrangement, not a full brake repair kit or a standard O-ring. The correct component must be selected...

Product Description Restore maximum drive torque and eliminate critical gear oil leaks with this premium aftermarket 33139036 travel motor seal kit, engineered specifically for JCB JS220 22-ton tracked excavators. This comprehensive rebuild kit contains heavy-duty dynamic pressure seals, high-elasticity O-rings, and heavy-duty oil seals designed to seal the high-pressure hydraulic...

Product Description2450596 is an aftermarket hydraulic cylinder seal kit referenced for selected Caterpillar D9 tractors and the 854K wheel dozer. The machine listing is not a guarantee for every cylinder position, so compare the installed cylinder group and original kit number before purchase. This is a sealing repair item rather...

Product DescriptionVOE17264860 is an aftermarket bucket-tilt cylinder seal kit referenced for Volvo L150G and L150H wheel loaders. Cylinder references 17230569 and 17230570 are listed for both models; additional L150G references include 15086728 and 15129463. This distinction helps buyers match the actual tilt assembly rather than choosing from the loader name...

Product Description RG248-67562 is an aftermarket boom cylinder seal kit referenced for later Kubota KX61-3 and KX71-3 compact excavators from serial number 75154 onward. It is the later serial-range reference for the boom cylinder, whereas RG248-67560 is listed for machines through serial 75153. Both kits are associated with a 40...

Product Description C3X005 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB81 hydraulic hammers. The Soosan SB-series parts book identifies C3X005 for the SB81 configuration. It is used when servicing internal breaker sealing positions during planned overhaul, oil leak inspection, or component repair. SB81 must not...

Product Description This aftermarket 561-33-71480 brake backup ring is referenced for the front wheel brake assembly of selected Komatsu HD785-7 rigid mining dump trucks. It is an individual sealing-support ring used within the brake assembly, rather than a complete seal kit or a standard O-ring. When the brake assembly is...

Product Description2401-9234KT is an aftermarket travel motor seal kit referenced for the Doosan Solar 220LC-V. It is used when servicing sealing in the hydraulic motor that drives the machine, not the motor that swings the upperstructure. Match the full kit number to the installed motor and check the machine serial...

Product Description 8T-1374 is an aftermarket hydraulic cylinder seal kit for selected older Caterpillar equipment using a 2.50 in rod and 5.50 in bore reference. It is a dimensional and cylinder-group kit, not a kit dedicated to only one machine function. Published catalogues reference it for ripper cylinders on D4D,...

Product Description12212125 is an aftermarket rod-side seal kit for the documented Liebherr R920 boom cylinder configuration. For a repair shop, the key buying decision is whether the leak is at the rod end or inside the cylinder: these service areas use separate kits. Check the installed cylinder identification before ordering,...

Product Description 172151-72020 is an aftermarket complete dipper/arm cylinder seal kit matched 1:1 to the original Yanmar kit reference. Verified Yanmar parts material places it in arm cylinder assembly 172151-72450-4 for VIO50 equipment, a 55 mm rod and 85 mm bore application. It is a complete cylinder repair kit reference,...

Product Description2401-9237KT is an aftermarket travel motor seal kit for matched Doosan/Daewoo hydraulic drive applications. Use the complete reference and motor identification to select the repair parts; a travel motor kit is not a swing motor or hydraulic pump kit. Machine model and serial details are useful when the original...

Product DescriptionVOE14589727 is an aftermarket bucket cylinder seal kit with a documented reference application on the Volvo EW160D wheeled excavator. An assembly table identifies bucket cylinder 14547546, providing a useful check beyond the machine model. The kit services the cylinder that curls and opens the bucket, while the dipper-arm cylinder...

Product Description 332/G9281 is an aftermarket replacement bucket cylinder seal kit for selected JCB JS200 and JS220 crawler excavators. It is used to rebuild the hydraulic cylinder that curls and dumps the bucket during digging, loading, and material-handling work. Published replacement-kit data identifies an 85 mm rod and 115 mm...

Product Description 4660834 is an aftermarket hydraulic cylinder seal kit for selected Hitachi large mining excavators. Verified catalogue records place it in EX3600-6 and EX3600E-6LD boom-cylinder groups, plus selected EX5500 arm/stick-cylinder groups. “Loader” or “front shovel” in some catalogues describes the excavator front attachment arrangement, not a wheel loader. Quote...

Product Overview The 2480‑9018KT Center Joint Seal Kit is an aftermarket replacement designed for DOOSAN and Daewoo excavators, ensuring reliable sealing performance in the center joint to prevent hydraulic leaks and maintain smooth machine operation. It fits specific mini excavator models and meets OEM fit standards. Product Details: Part Name: ...

Product DescriptionFor a Volvo EC480D or EC480DHR main-valve sealing repair, VOE14609485 is an aftermarket kit reference to check against the installed assembly. Replacement listings also identify EC460B, EC460C and EC460CHR applications. The machine name alone does not define which valve section or seals are required. Ruijueparts can review the original...

Product DescriptionXP00000080PS is an aftermarket sealing-kit reference for Hitachi hydraulic service. Keep the full reference, including the PS suffix, when comparing a quotation or an old package label. Similar XP numbers in a parts list do not establish that the kits interchange, and a complete machine-fit list has not been...