Product Description71418481 is used here as the ordering reference for a complete aftermarket boom-cylinder seal kit for a matched Fiat-Hitachi assembly. Replacement catalogues identify the original reference on the piston side of an FH215 boom cylinder; our supplied set is a complete cylinder sealing kit, not just that partial catalogue...

Product Description 132-6783 is an aftermarket hydraulic blade lift cylinder seal kit for Caterpillar D11N and D11R crawler dozers. It services the left- or right-hand dozer lift cylinders that raise and lower the blade; it is not the blade tilt, ripper or pin-puller kit. Published catalogues identify cylinder 4T2727 for...

Product Description RH418-71590 is an aftermarket bucket cylinder seal kit for Kubota U27-4 compact excavators, with U27-4CA included in aftermarket application references. This repair kit reference is associated with the bucket cylinder and a 40 mm rod × 65 mm bore. The bucket cylinder controls attachment curl and dump movement,...

Product Description21N-30-00090 is an aftermarket floating seal assembly referenced for Komatsu undercarriage sealing applications. The reference identifies a face-seal assembly, not a hydraulic cylinder rebuild kit. Match the original number and the serviced assembly before ordering; similar ring diameters do not establish interchangeability. Check the mating surfaces and installation procedure...

Product Description3L3313 is an aftermarket lip seal referenced for selected Caterpillar motor graders and marine engines. These are separate equipment applications, so a matching model family should be followed by an assembly-level check. Use the original number, also written 3L-3313, and identify the shaft sealing position before purchase. Ruijueparts supports...

Product Description1917725K is an aftermarket seal-kit ordering reference for a matching Caterpillar 191-7725 extendable-stick cylinder. The K suffix identifies the repair-kit reference used in replacement catalogues; the cylinder number without K describes the assembly. Confirm the installed extendable-stick cylinder before purchase rather than selecting a standard digging-stick kit. Ruijueparts can...

Product Description243-0384 is an aftermarket hydraulic cylinder seal kit with reference applications across selected Caterpillar graders, scrapers, trucks and loaders. For fleet purchasing, record the cylinder group beside each machine rather than treating the shared kit reference as proof that the complete cylinders are interchangeable. Check the original service number...

Product DescriptionVOE14684116 is an aftermarket swing motor seal kit referenced for selected Volvo EC380D, EC750D and EC750E excavators. The swing motor rotates the upper structure; it is a different assembly from the travel motor or centre swivel joint. A published parts list associates this kit with swing motor 14653149. Check...

Product Description Minimize heavy machinery downtime with the 195-13-05150 Torque Converter Service Kit, engineered as a high-performance aftermarket solution for Komatsu large crawler bulldozers. This comprehensive kit includes all essential premium seals, gaskets, and wear components required to rebuild and restore fluid transfer efficiency in heavy-duty torque converters. Manufactured to...

Product Description543-9692 is an aftermarket blade-lift cylinder seal kit referenced in the Caterpillar 140 GC parts manual. It corresponds to cylinder group 532-9473 in the blade-lift arrangement, rather than the steering, articulation or blade-tip cylinders. This distinction helps a workshop order the correct repair seals for a grader with several...

Product DescriptionVOE15173429 is an aftermarket dipper-arm cylinder seal kit referenced for Volvo BL70, BL70B, BL71, BL71B and BL71 PLUS backhoe loaders. The dipper cylinder moves the backhoe arm during trenching; it is distinct from the front-loader mechanism. An associated cylinder reference is VOE15649973. Compare the installed assembly before ordering, especially...

Product DescriptionVOE11988358 is an aftermarket boom cylinder seal kit with reference applications on Volvo EC25 and ECR28 compact excavators. The boom cylinder raises and lowers the main digging boom; the dipper, bucket and blade have separate service requirements. ECR28 parts literature identifies the kit in the boom-cylinder group, while EC25...

Product Description 2440-9122KT is an aftermarket boom cylinder seal kit matched 1:1 to the original Doosan/Daewoo repair-kit reference. It is listed for the boom hydraulic cylinder on Solar 170-III and Solar 170W-III excavators, also shown as S170W-3 in aftermarket catalogues. The application has an 80 mm rod and 115 mm...

Product Description2401-9228KT is an aftermarket travel motor seal kit listed for Doosan Solar 450LC applications. It should be matched to the installed drive motor rather than selected from an unrelated Solar model family. Check the motor identification, original repair reference and machine serial number before purchase, particularly on equipment with...

Product Description 6803281 is an aftermarket hydraulic cylinder seal kit referenced primarily as a blade cylinder kit for Bobcat compact excavators 220, 320, and 322. On selected X-320 excavator configurations, the same part-number reference is also associated with specific boom or arm cylinder applications; cylinder position depends on the machine...

Product Description Aftermarket VOE11707447 lift cylinder seal kit for Volvo L120C and L120D wheel loaders equipped with lift cylinder 11107316. It services the hydraulic cylinder that raises and lowers the loader boom and bucket assembly. The reference size is a 90 mm rod × 170 mm bore. Compatibility is controlled...

Product Description2401-9165KT is an aftermarket main pump seal-kit reference covering pump body and regulator sealing. Supplier application tables include Solar 400-V and Solar 450-V configurations, but the fitted pump remains the deciding match. Confirm the pump identification and required sealing components before disassembly or purchase. Ruijueparts supports part-number enquiries for...

Product Description This aftermarket 991/00015 hydraulic cylinder seal kit is referenced for selected JCB equipment using a 40 mm rod and 70 mm cylinder bore. Depending on the machine configuration, it may service loader tilt, standard stabilizer, stick extension, extension, tilt, or clamshovel cylinders. This is why buyers should not...

Product Description 87342131 is an aftermarket extendible dipper cylinder seal kit for selected New Holland loader backhoes. It reseals the telescoping dipper, also called the Extendahoe, cylinder that extends and retracts the backhoe arm, rather than the boom, bucket, swing, loader or stabilizer cylinder. New Holland parts data identifies a...

Product Description 5422090 is an aftermarket front boom lift cylinder seal kit reference for MST backhoe loaders. Catalogues identify it for the loader boom lift hydraulic cylinder on MST M542/M544 families, rather than the rear excavator boom, bucket cylinder, or steering system. This matters because front-loader and rear-backhoe cylinders can...

Product Description 335-1414 is an aftermarket control valve seal kit reference for compatible Caterpillar backhoe loaders. A 424B parts manual shows it in a control-valve/control-bank assembly, not a cylinder group. It supports resealing the applicable valve location during control-valve service. The public listing does not identify a universal valve position...

Product Description The 526-1039 aftermarket hydraulic cylinder seal kit is supplied for Caterpillar-compatible 426 and 426 F2 backhoe loaders. It supports hydraulic cylinder resealing during repair work when worn sealing elements may contribute to oil leakage, pressure loss, or reduced operating stability. Correct fitment depends on the specific cylinder group,...