Product Description AH149815 is an aftermarket 63 mm hydraulic cylinder rod seal kit reference for selected John Deere equipment. It serves the rod and gland end of compatible cylinders rather than the piston-side bore. Published application tables place this reference on different cylinder locations, including backhoe crowd, bucket, and boom...

Product Description AT280406 is an aftermarket hydraulic control-valve spool seal kit for selected John Deere construction equipment. It reseals the movable spool section inside a control valve and may help address leakage or control loss from worn seals. It is not a hydraulic cylinder, pump, or engine seal kit. Parts...

  02428571-SK is an aftermarket hydraulic main pump seal kit reference associated with the 02428571 main pump used on Doosan/Daewoo SOLAR 75-V and S75-V excavators. It is intended for main-pump overhaul, not for hydraulic cylinders, center joints or travel motors. A pump repair should begin by matching the original seal-kit...

Product Description This aftermarket 991/00061 loader lift cylinder seal kit is referenced for selected JCB backhoe loader lift rams with a 50 mm piston rod and 80 mm cylinder bore. It is commonly listed for later serial applications from M320000 onward, making serial-number verification essential when distinguishing it from earlier...

Product Description94026874 is an aftermarket rod seal kit for selected Liebherr cylinder assemblies. A useful ordering check is to record both the cylinder number and the service area, because rod-end and piston kits can appear together in parts lists without being interchangeable. Confirm the assembly on the machine before purchasing,...

Product DescriptionT42302 is an aftermarket o-ring supplied by Ruijueparts. Tractor references include John Deere 6R 110 and 6R 120; the original reference lists 101.27 mm inside diameter and approximately 2.62 mm section. This is an individual O-ring reference, not a complete cylinder repair kit. Match the groove and service number...

Product DescriptionVOE12724304 is an aftermarket seal-kit reference for selected Volvo motor grader cylinders. Circle-turn applications are catalogued for 750A and 780A graders with cylinder 89011, making the cylinder reference a useful starting point for buyers maintaining older equipment. Check the machine serial number before ordering rather than relying on the...

Product Description Aftermarket VOE17265044 tilt cylinder seal kit for selected Volvo L250G and L250H wheel loaders. It services the hydraulic tilt cylinder that curls and dumps the loader bucket during operation. The reference size is a 120 mm rod × 220 mm bore. The published kit composition includes a scraper,...

Choose the seal kit of Ruijueparts. Slash costly downtime. Fits equipment: SY65, SY75  Condition: New – Open box: A new, unused item Brand: SANY replacement

Product Description 10X1354 is an aftermarket loader lift cylinder seal kit referenced for Terex Vectra TX760 backhoe loader applications. It is intended for the front loader lift cylinder, which raises and lowers the loader arms; it is not a rear excavator boom or dipper-cylinder repair kit. Published seal references group...

Product DescriptionVOE14596398 is an aftermarket travel motor seal kit referenced for Volvo EC290B excavators. A published assembly list associates it with travel motor 14592002, which drives the track through the final-drive reduction assembly. This is a motor sealing repair item, not a complete final drive or a swing motor kit....

PRODUCT DESCRIPTIONThis aftermarket hydraulic seal kit listing is referenced for the Bobcat E17z compact excavator. The E17z uses different seal kits across hydraulic assemblies and cylinder positions, so the machine model alone does not confirm fitment. Match the original kit or component number and confirm the machine serial number before...

Part Name: 71400133Machine Models: FH220, FH300-1-2Brand: HITACHI replacementType: Arm & Boom Hydraulic Seal KitApplication: Used in arm and boom hydraulic cylinders of Fiat‑Hitachi / Hitachi excavators (e.g., FH220‑1, FH220‑2, FH300‑1, and FH300‑2) to replace worn seals, maintain hydraulic pressure, and stop fluid leakage.Size: Standard SizeSupply Ability: 10,000 sets per monthPerformance:...

Product DescriptionAL175094 is an aftermarket steering cylinder seal kit supplied by Ruijueparts. John Deere tractor references include 6810, 6910, 6820, 6920 and 6150R; the Dana catalogue cross-references cylinder sealing kit 750.24.450.15. The axle and steering-cylinder versions decide fit. A cross-reference does not make every steering kit for the same tractor...

Product DescriptionVOE14589146 is an aftermarket hydraulic cylinder seal kit referenced for Volvo EC460C L and EC460C LD excavators. Replacement catalogues associate it with cylinder 14563828, using an 80 mm rod and 160 mm bore as identification dimensions. The catalogue labels this application as hydraulic, so a boom, arm or bucket...

Product Description904/09400 is an aftermarket piston seal for matching JCB Hydra Clamp applications on 3CX and 4CX backhoe loaders. This is an individual clamp seal, not a complete boom, bucket or stabilizer cylinder repair kit. Check the clamp assembly reference and the removed seal profile before purchase, as other clamp...

Product Description 707-99-66210 is an aftermarket steering cylinder seal kit referenced for selected Komatsu WA800 and WA900 wheel loaders. It services the hydraulic steering cylinders that turn the machine’s articulated chassis, helping address external leakage or loss of steering-cylinder sealing during overhaul. The reference is used with 100 mm rod...

Product Description This aftermarket hydraulic breaker seal kit is intended for verified Furukawa F6 breaker repair and overhaul applications. F6 breakers operate in demanding demolition, quarry, and construction environments, where worn seals may contribute to oil leakage, reduced impact efficiency, or unplanned service downtime. Before ordering, confirm the breaker model,...

Product DescriptionYB00003778 is an aftermarket seal kit for a matching Hitachi excavator center or swivel joint. This rotary hydraulic connection carries oil between the upperstructure and undercarriage as the machine turns. It is a different service location from the swing motor or boom cylinder. For ZX350-5G enquiries, send the complete...

Product DescriptionLQM0029 is identified as a travel motor seal kit for the JCB CX210 excavator. It is intended for resealing the travel motor assembly; confirm the machine serial number and motor identification before ordering because component configurations can vary. Ruijueparts supports original part-number lookup across a 100,000+ reference database, custom...

Product Description4649751 is an aftermarket bucket-cylinder seal kit for matched Hitachi excavator applications. It is intended for the cylinder that curls and uncurls the bucket, so it should be checked separately from an arm or boom repair kit on the same machine. Confirm the installed cylinder and serial configuration before...

Product DescriptionAH212103 is an aftermarket piston seal kit 115mm supplied by Ruijueparts. One documented application is John Deere 310SE backhoe crowd cylinder AH164137, serial range 837258–873598; selected 444J and 850J applications also exist. The 115 mm bore identifies the piston side, not the rod diameter. Different cylinder positions need separate...

Product Description180-00198 is an aftermarket rod seal referenced for Doosan equipment. It is an individual sealing component, so it should not be ordered as a complete hydraulic cylinder repair kit. Confirm the original reference and the assembly being serviced, then compare the seal profile and dimensions before installation. Ruijueparts offers...

Product Description C3X005 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB81 hydraulic hammers. The Soosan SB-series parts book identifies C3X005 for the SB81 configuration. It is used when servicing internal breaker sealing positions during planned overhaul, oil leak inspection, or component repair. SB81 must not...