Product DescriptionCB11457801 is an aftermarket boom flex cylinder seal kit supplied by Ruijueparts. John Deere identifies this as a boom flex cylinder kit for selected 1850 and 2254 equipment; replacement catalogues list 2.5 inch rod and 4 inch bore. Some listings use boom lift wording, but the original product reference...

Product DescriptionThis aftermarket pump seal kit is offered for matching Eaton / Vickers PVE19 and PVE21 hydraulic pump applications. PVE19/21 is a pump-family ordering reference, not a single original seal-kit number. Service catalogues list different sealing sets by pump version, so supply the complete nameplate code and compare the required...

Product Description Since the arm cylinder (dipper) is constantly extending and retracting during excavation, its dust seals and rod seals are highly susceptible to wear from external mud and debris. When replacing the 12989100 kit, we recommend inspecting the piston rod for any bends or scratches; the intense lateral forces...

Product DescriptionVOE14589133 is an aftermarket bucket cylinder seal kit referenced for selected Volvo EC240C and EC250D/E excavators, with additional applications listed by replacement suppliers. The EC240C catalogue includes cylinder 14551717; an EC250E entry identifies 14572352. These assembly numbers help separate this kit from other bucket options on the same machine....

Product DescriptionVOE11709617 is an aftermarket front-loader lift cylinder seal kit referenced for Volvo BL61, BL61 Plus, BL70, BL71 and BL71 Plus backhoe loaders. These cylinders raise and lower the loader arms at the front of the machine; the rear digging boom uses a separate kit. Match the installed cylinder and...

Product Description THBB-301 is an aftermarket hydraulic breaker seal kit for a verified TOYO THBB-301 hydraulic hammer. It is used to replace applicable internal sealing elements during planned maintenance, oil-leak diagnosis, or breaker overhaul. The THBB-301 is a breaker attachment; this kit is not for the carrier excavator’s hydraulic cylinders....

Product Description7G-8666 is an aftermarket oscillating seal for matched Caterpillar equalizer-bar applications. This type of joint moves through an angle rather than functioning as a hydraulic cylinder rod gland, so the sealing position must be identified correctly. Check the original reference and pin arrangement when servicing the undercarriage support system....

Product Description Aftermarket VOE11709624 hydraulic cylinder seal kit for selected Volvo BL60, BL61, BL61 Plus, BL70, BL71, and BL71 Plus backhoe loaders. Depending on the model and serial number, it reseals either the dipper cylinder or the loader tilt cylinder. Reference cylinder dimensions are 60 mm rod × 110 mm...

Product Description 1543268C1 is an aftermarket replacement seal kit matched 1:1 to the original CASE repair-kit reference. Its primary application is the backhoe bucket cylinder G103503, with a 2-in rod and 3-1/4-in bore reference. The original part number supersedes G109465, helping distributors manage legacy and current SKU searches under one...

Product Description 6I-2431 is an aftermarket radiator core seal for selected Caterpillar cooling-system assemblies. It is a 160 mm EPDM rubber seal installed between the radiator core and the lower radiator tank; it is not a hydraulic cylinder, pump, or engine oil seal. A damaged seal can allow coolant leakage...

Product Description TH111627 is an aftermarket hydraulic seal kit for the dipper stick/arm cylinder on selected John Deere 892D and 892D LC excavators. Published fitment data identifies a 110 mm rod and 165 mm bore for cylinder references AT131416 and TH111616, prior to serial number 703549. The dipper cylinder controls...

Product Description 6661297 is an aftermarket hydraulic cylinder seal kit for selected Bobcat backhoe attachments and skid-steer loaders. It has different working-cylinder applications by equipment type: it is referenced for boom cylinder service on the 909 backhoe attachment and for tilt-cylinder service on specified older loaders. It is therefore not...

Product DescriptionVOE15196138 is an aftermarket bucket cylinder seal kit referenced for the Volvo BL71B backhoe loader. The listed application concerns the digging bucket cylinder, which curls and opens the rear bucket during excavation. A front-loader tilt cylinder or multi-purpose bucket actuator needs its own service-number check. Ruijueparts can review the...

Product Description 448/17201 is an aftermarket hydraulic steering cylinder seal kit for selected JCB telehandler applications. The steering ram transfers hydraulic force through the steering linkage to turn the wheels, making correct cylinder identification important for safe machine operation. Catalogue data specifically lists this reference for the steering cylinder on...

Product Description 707-99-66210 is an aftermarket steering cylinder seal kit referenced for selected Komatsu WA800 and WA900 wheel loaders. It services the hydraulic steering cylinders that turn the machine’s articulated chassis, helping address external leakage or loss of steering-cylinder sealing during overhaul. The reference is used with 100 mm rod...

Product Description AL208002 is an aftermarket hydraulic lift cylinder seal kit reference for selected John Deere agricultural tractors. Official parts data identifies it as a hydraulic lift cylinder seal kit, while published replacement references describe a 90 mm lift-cylinder application. It is intended for the tractor hydraulic lift system that...

Product Description 87428629 is an aftermarket hydraulic bucket cylinder seal kit for selected New Holland backhoe loaders. It is used to rebuild the backhoe bucket cylinder that curls and dumps the digging bucket, not a loader-lift, dipper, steering or stabilizer ram. Official kit data identifies a 63 mm rod-side bearing...

Product Description 707-99-64250 is an aftermarket blade tilt cylinder seal kit referenced for Komatsu D155AX-6 crawler dozer applications. It services the hydraulic cylinder that angles the dozer blade left or right, rather than the blade lift, ripper or track-adjuster cylinders. Catalogue references associate the kit with cylinder assembly 707-04-00240 and...

Product Description Keep your heavy machinery operating at peak performance with our premium aftermarket 377-9352 hydraulic seal kit, precision-engineered for Caterpillar equipment. Built to withstand extreme pressure fluctuations and intense mechanical stress, this kit features heavy-duty buffer seals, rod seals, and wiper seals that effectively prevent oil leakage and block...

Product Description6686865 is an aftermarket swivel joint seal supplied by Ruijueparts. The E20z hydraulic swivel diagram lists this seal separately from 7225616 and the back-up ring, even though these items can be needed in the same repair. Match the original service number, machine serial number and installed assembly before ordering....

Product Description1.407-00006 is an aftermarket travel motor seal kit referenced for Doosan/Daewoo Solar 75-V and S80 Gold applications. It concerns the hydraulic motor that drives the tracks, not the swing motor that turns the upperstructure. Retain the punctuation and complete number when comparing repair references, then confirm the installed motor...

Product Description154503A1 is an aftermarket o-ring supplied by Ruijueparts. The CNH catalogue lists 154503A1 as an O-ring within several construction-equipment service groups, including LZ00626. A listing within a larger gasket kit does not mean this individual part includes the other kit components. For older equipment, Ruijueparts can assess custom sealing...

Product Description154487A1 is an aftermarket o-ring supplied by Ruijueparts. The official CNH catalogue identifies 154487A1 as an O-ring, also referenced in New Holland construction service groups. The same reference may appear across brands, but that does not establish fit for every machine from either brand. Ruijueparts offers reference lookup through...

Product Description9156961 is an aftermarket piston seal kit referenced in more than one Liebherr cylinder application. For maintenance purchasing, avoid treating a familiar machine model as proof of fit: the same model can have different boom, stick and bucket cylinders. Confirm the original kit number and installed cylinder identification, then...