Product Description C1X001 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB50 hydraulic hammers. The official Soosan SB-series parts book lists C1X001 as the seal kit for SB50. It is intended for replacing applicable internal breaker seals during overhaul, oil-leak inspection, or repair work. If the...

Product Description 6803281 is an aftermarket hydraulic cylinder seal kit referenced primarily as a blade cylinder kit for Bobcat compact excavators 220, 320, and 322. On selected X-320 excavator configurations, the same part-number reference is also associated with specific boom or arm cylinder applications; cylinder position depends on the machine...

Product DescriptionWhen servicing a bearing retention arrangement, use the complete 2P4471 reference rather than selecting a ring by appearance. Catalogued as 2P-4471, this aftermarket bearing nut lock is mechanical hardware for matching Caterpillar assemblies. It is not an O-ring or a hydraulic seal kit. Verify the mating nut and locating...

Product Description3D8417 is an aftermarket rotating-shaft lip seal referenced for selected Caterpillar wheel loaders. The original reference is also formatted 3D-8417. It identifies a separate sealing component rather than a complete axle or transmission kit. Check the shaft interface and housing arrangement before ordering, because a loader uses several lip...

Product DescriptionVOE15012903 is an aftermarket steering cylinder seal kit referenced for Volvo L330-series wheel-loader repairs. Published L330C applications identify cylinders 11107381 and 11107382, and replacement listings also include L330D and L330E. Steering-cylinder identification is particularly useful on older loaders whose assemblies may have changed during service. Ruijueparts can help review...

Product Description243-0384 is an aftermarket hydraulic cylinder seal kit with reference applications across selected Caterpillar graders, scrapers, trucks and loaders. For fleet purchasing, record the cylinder group beside each machine rather than treating the shared kit reference as proof that the complete cylinders are interchangeable. Check the original service number...

Product Description 6589796 is an aftermarket hydraulic cylinder seal kit for selected Bobcat compact excavators and wheel loaders. It replaces the earlier 6587987 reference. On X225 and X325 excavators, the same kit may apply to specified arm, blade, boom, or bucket cylinders; on 2400 and 2410 wheel loaders, it is...

Product Description Aftermarket VOE11716047 steering cylinder seal kit for selected Volvo L350F wheel loaders. It services the hydraulic steering cylinder that articulates the loader during turning and directional control. Seal catalogs list a reference rod × bore size of 70 × 110 mm, while application data associates the kit with...

Product Description The 7X-2701 Hydraulic Cylinder Seal Kit is an aftermarket replacement for selected Caterpillar 980-series wheel loaders. Cross-checked catalogs list 980C, 980F, and 980F II and show both high-lift and tilt-cylinder applications. Documented cylinder references include 4T-6791, 4T-7949, 9T-2418, and 9T-2419. Catalog size is a 3-inch rod with a...

Product Description 548/12801 is an aftermarket replacement quick hitch ram seal kit for selected JCB attachment-locking hydraulic cylinders. It is commonly used for a small 12.7 mm (1/2 in) rod × 25 mm bore cylinder that operates the quick-hitch or carriage locking pins. A correctly resealed locking ram helps maintain...

Product Description GH-1 is an aftermarket hydraulic breaker seal kit for a verified NPK GH-1 hydraulic hammer. It supports replacement of applicable internal sealing elements during routine maintenance, hydraulic-leak diagnosis, or breaker overhaul. NPK GH-1 is commonly listed for an approximately 2.5–4.5 ton carrier class with a 57 mm tool...

Product DescriptionFor Caterpillar 980G, 980G II and 980H cylinder maintenance, 228-0808 is an aftermarket sealing-kit reference to match against the installed assembly. The original catalogue identifies a hydraulic cylinder kit; it should not be selected for every cylinder solely because the loader model is listed. Check the cylinder group and...

Product Description RG638-67540 is an aftermarket boom cylinder seal kit referenced for selected Kubota compact excavator variants, including KX101-3 Alpha and U35-3 Alpha applications. Catalogue data identifies it as a boom-cylinder kit with a 45 mm rod and 85 mm bore reference. It must not be marketed as a dipper/arm...

Product Description AH225673 is an aftermarket 1/2 in cartridge seal kit reference for selected John Deere combine single-point hydraulic coupler systems. It is associated with the sealing cartridge for a 1/2 in hydraulic quick-coupler socket used on compatible headers and platforms. This kit supports service work when a technician removes,...

Product Description Keep your Komatsu dozers operating at peak hydraulic efficiency with the 707-99-56690 Blade Lift Cylinder Seal Kit. Specifically engineered for the D375A-5D (Serial No. 17743 and up), this high-performance kit is indispensable for preventing fluid leakage and maintaining consistent blade thrust. Designed to meet OEM standards, it features...

Product Description6162-63-1515 is an aftermarket water pump seal for matching Komatsu engine cooling pumps. Replacement catalogues identify this reference for selected S6D170 and SA6D170 engine applications, but the pump assembly must also match. It is a sealing component rather than a complete water pump or hydraulic cylinder repair kit. Before...

Product Description 172020-11600 is an aftermarket complete boom cylinder seal kit referenced for selected Yanmar compact excavator applications. It services a 65 mm rod and 115 mm bore boom cylinder, helping restore hydraulic sealing during professional cylinder rebuilding. This reference is listed for selected VIO75, VIO75-A, VIO75-C and VIO70-2 applications....

Choose the seal kit of Ruijueparts. Slash costly downtime. Fits equipment: SY65, SY75  Condition: New – Open box: A new, unused item Brand: SANY replacement

Product Description Aftermarket 7135557 hydraulic cylinder seal kit for compatible Bobcat skid steer loaders, compact track loaders, and compact excavators. This 2.25" bore × 1.50" rod seal kit is referenced for loader lift cylinders and selected excavator extendable arm, bucket, or clamp cylinders, depending on the machine model and cylinder...

Product Description AH149815 is an aftermarket 63 mm hydraulic cylinder rod seal kit reference for selected John Deere equipment. It serves the rod and gland end of compatible cylinders rather than the piston-side bore. Published application tables place this reference on different cylinder locations, including backhoe crowd, bucket, and boom...

Product Description87529743 is an aftermarket bucket tilt cylinder seal kit supplied by Ruijueparts. CASE 821E and 821F wheel-loader bucket/tilt references include cylinders 87696084 and 87337179, with a 3.5 inch rod and 6.5 inch bore. XR and Z-bar arrangements use different cylinder numbers; confirm linkage and cylinder reference, including later Tier...

Product DescriptionVOE17496978 is an aftermarket gear-selector valve sealing kit referenced across selected Volvo wheel loaders, articulated haulers and motor graders. Replacement catalogues also associate it with reference 15089650. This is a transmission hydraulic-control service item, not a complete gearbox gasket set or a working-cylinder kit. Check the valve and transmission...