Product Description2401-9121AKT is an aftermarket travel motor seal kit referenced for selected Solar 130LC-V and Solar 140LC-V applications. Retain the full AKT suffix when comparing repair numbers; a similar base number does not confirm identical sealing contents. Check the installed motor and machine serial details before purchase, particularly on older...

Product Description MT36519 is an aftermarket replacement hydraulic breaker seal kit reference for verified Montabert BRH125 hydraulic hammers. Independent breaker-parts catalogues identify MT36519 for BRH125 service, while 46294 is also used as a legacy cross-reference in some markets. The kit is intended for replacing applicable internal sealing components during planned...

Product Description2401-9178K is an aftermarket swing motor seal kit referenced in the Solar 170W-III swing motor parts group. The catalogue describes an O-ring kit, so the reference should be checked as a sealing set rather than an individual ring chosen by appearance. Verify the installed motor and machine serial details...

Product Description AH148823 is an aftermarket 32 mm hydraulic cylinder rod seal kit for selected John Deere equipment. It serves the rod and gland end only, not the piston/bore side. This matters when a repair shop is diagnosing a leak at the rod exit or rebuilding only the gland assembly....

Product Description2274-6014AKT is an aftermarket track adjuster seal kit referenced in the S470LC-V track spring parts group. It services sealing associated with track tension adjustment, rather than the hydraulic travel motor that drives the tracks. Confirm the adjuster assembly and machine serial details before purchase, and compare the required sealing...

Product Description154467A1 is an aftermarket o-ring supplied by Ruijueparts. CNH lists this O-ring with reference dimensions of 10.8 mm inside diameter and 2.4 mm section. Match both cross-section and groove; a similar-looking ring or nearby part number is not proof of compatibility. For older equipment, Ruijueparts can assess custom sealing...

Product Description 903/05632 is an aftermarket replacement hydraulic breaker seal kit for JCB Hammermaster 260 Mk2 breakers, including confirmed HM260 and HM260Q references. It is intended for resealing applicable internal breaker positions during overhaul after oil leakage, planned dismantling, or component inspection. It is not a complete breaker, piston, or...

Product Description This aftermarket hydraulic breaker seal kit is for verified Furukawa F1 hydraulic hammer repair applications. F1 is an older discontinued breaker model, so serial number and configuration checking are essential before ordering. FRD USA F1 parts information for serial number 5001 and up references KF1-92010 and KF1-92011 seal-kit...

Product Description SB131 U641 is an aftermarket hydraulic breaker seal kit reference for selected Soosan SB131 hydraulic breakers. The U641 designation is commonly used in aftermarket seal catalogues to identify a heat-resistant polyurethane seal specification for breaker service. This kit is intended to renew compatible internal sealing positions during hydraulic...

Product Description This aftermarket hydraulic breaker seal kit is intended for verified Furukawa F6 breaker repair and overhaul applications. F6 breakers operate in demanding demolition, quarry, and construction environments, where worn seals may contribute to oil leakage, reduced impact efficiency, or unplanned service downtime. Before ordering, confirm the breaker model,...

Product Description EDT400 is an aftermarket hydraulic breaker seal kit for a verified EDT 400 hydraulic hammer. The EDT 400 is commonly identified by its 68 mm tool diameter; this dimension helps identify the breaker model but does not replace nameplate or seal-size verification. The kit is intended for replacement...

Product Description 234-25-31440 is an aftermarket tandem drive seal for selected Komatsu motor graders. Komatsu classifies this reference under Tandem Drive-related components, placing it in the rear drive assembly rather than the engine, hydraulic cylinder, or transmission-control system. The tandem drive transfers power through the grader’s rear wheel-drive arrangement, where...

Product Description 126-1876 is an aftermarket replacement cushion seal ring for selected Caterpillar hydraulic cylinder assemblies. It is an individual steel seal component, not a complete cylinder repair kit or a conventional O-ring. Reference dimensions are 95 mm OD × 89 mm ID × 6 mm axial height. Published cylinder-kit...

Product Description1.407-00006 is an aftermarket travel motor seal kit referenced for Doosan/Daewoo Solar 75-V and S80 Gold applications. It concerns the hydraulic motor that drives the tracks, not the swing motor that turns the upperstructure. Retain the punctuation and complete number when comparing repair references, then confirm the installed motor...

Product Description2401-9144K is an aftermarket main pump O-ring kit listed in the Solar 170W-III main pump diagram. The diagram separates this sealing set from the regulator, rotary groups and pump assemblies, helping buyers distinguish a seal order from a larger overhaul. Verify the fitted pump and serial-specific parts information before...

Product Description2401-9154K is an aftermarket main pump seal kit referenced for Doosan/Daewoo Solar 280LC-III applications. Its purpose is pump sealing; it should not be selected for a travel motor simply because another kit has a similar number. Keep the complete K-suffix reference and compare it with the installed pump service...

Product Description THBB-101 is an aftermarket hydraulic breaker seal kit for a verified TOYO THBB-101 hydraulic hammer. It supports replacement of applicable internal sealing elements during routine maintenance, leakage diagnosis, or breaker overhaul. THBB-101 is commonly associated with a 57 mm tool diameter, but tool size alone cannot confirm the...

Product DescriptionVOE15089737 is an aftermarket sealing kit for a transmission hydraulic-control pressure regulator, rather than a loader or excavator working cylinder. An A25G parts listing places it under regulator 11430025 within the main pressure-valve assembly. Confirm the regulator identification, transmission details and machine serial number before selecting the kit. Ruijueparts...

Product Description2401-9165KT is an aftermarket main pump seal-kit reference covering pump body and regulator sealing. Supplier application tables include Solar 400-V and Solar 450-V configurations, but the fitted pump remains the deciding match. Confirm the pump identification and required sealing components before disassembly or purchase. Ruijueparts supports part-number enquiries for...

Product Description2401-9155K is an aftermarket main hydraulic pump seal kit with Solar 55, Solar 55-V and Solar 55W-V reference applications. These listings span crawler and wheeled equipment, making pump identification more useful than assuming all machines in the size class use one kit. Check the full repair reference and pump...