Product Description Keep your hydraulic systems running at peak efficiency with the high-quality 707-99-72320 Boom Cylinder Seal Kit from Ruijueparts. Designed as a premium aftermarket replacement for Komatsu heavy machinery, this repair kit contains all the essential wear-resistant components required to prevent fluid leaks, safeguard sensitive systems against dirt and...
Product Description5F8916, also written 5F-8916, is an aftermarket nut-lock component referenced for Caterpillar basic engine auxiliary-drive applications. It provides mechanical retention rather than fluid sealing. The catalogue spans several engine and machine families, making the assembly reference more useful than a broad model match. Check the locating tab and mating...
Product Description The 319-3558 Hydraulic Cylinder Seal Kit is an aftermarket replacement for selected Caterpillar D9T, D9R, D8L, and D9N track-type tractors. Cat data confirms a 3-inch (76.2 mm) rod and 4.75-inch (120.65 mm) bore. Industry catalogs document dozer-lift use on selected D9T configurations, including cylinder group 165-8633; do not...
Product Description L0X003 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB81N II hydraulic hammers. The Soosan SB-series parts book identifies L0X003 for SB81N II breakers from serial number 4750 onward. If “SB81N-P6000” is the identification shown on your breaker, submit a nameplate photo for confirmation...
Product Description246-5917 is an aftermarket hydraulic cylinder seal kit referenced across selected Caterpillar tractors, excavators and graders. These equipment listings do not mean that every cylinder on those machines uses the same kit. Identify the exact cylinder group and compare the original kit number before dismantling for a planned repair....
Product Description 86507789 is an aftermarket steering control unit seal kit matched 1:1 to the current CNH original reference. It replaces legacy part number 1343658C3, allowing distributors to serve both current and older part-number searches with one product listing. This kit is for the hydraulic steering hand pump, Orbitrol, or...
Product Description 170-0493 is an aftermarket replacement accumulator seal kit for selected Caterpillar hydraulic accumulator applications. Caterpillar identifies it as a standard 4-inch-bore piston seal kit, not a hydraulic-cylinder, pump, motor, or transmission repair kit. Hydraulic accumulators store and release pressurized oil to support system response, making correct part-number matching...
Product Description Aftermarket 7135547 hydraulic cylinder seal kit for compatible Bobcat skid steer loaders, track loaders, and mini excavators. This kit is commonly referenced for tilt cylinder repair and may also service other hydraulic cylinders depending on machine model and cylinder number. It replaces earlier reference number 6530345 and is...
Product Description 8T-1374 is an aftermarket hydraulic cylinder seal kit for selected older Caterpillar equipment using a 2.50 in rod and 5.50 in bore reference. It is a dimensional and cylinder-group kit, not a kit dedicated to only one machine function. Published catalogues reference it for ripper cylinders on D4D,...
Product DescriptionT218502 is an aftermarket steering cylinder seal kit supplied by Ruijueparts. John Deere backhoe references include selected 310J, 310K, 310SJ, 310SK, 410J and 410K front-wheel-assist steering assemblies, including cylinder AT326542. The catalogue identifies a 40 mm rod and 65 mm bore for the listed assembly. Some sales pages reverse...
Choose the seal kit of Ruijueparts. Slash costly downtime.
Condition: New – Open box: A new, unused item
Brand: BOBCAT replacementTarget Audience: Customers with long-term procurement needs for sealing kits, including repair shops, distributors, import/export trading companies, and construction machinery rental companies.
Choose the seal kit of Ruijueparts. Slash costly downtime.
Fits equipment: L180F HL
Condition: New – Open box: A new, unused item
Brand: VOLVO replacement
Product Description991/10147 is an aftermarket hydraulic cylinder sealing kit identified by its complete JCB reference. The available kit catalogues confirm the cylinder-seal category but do not establish a specific machine model or cylinder position for this offer. Use the original kit number and installed cylinder identification before ordering. Ruijueparts can...
Product Description 250741A1 is an aftermarket angle-cylinder seal kit matched 1:1 to the original CASE repair-kit reference. It is used on selected crawler dozer angle cylinders, which angle the blade left or right. The original kit is associated with cylinder references 190595A2 and 412359A1 and a 1-3/4 in rod ×...
Product DescriptionLZ011200 is an aftermarket arm cylinder seal kit supplied by Ruijueparts. CASE CX210B and CX210C references include arm cylinder KRV19600. The replacement catalogue specifies a 100 mm rod and 140 mm bore. CX210D variants use additional cylinder references; confirm the installed cylinder and safety-valve configuration. Neutral or customer-specified packaging...
Product Description1Z-9339 is an aftermarket lip seal referenced for Caterpillar equalizer-bar service on selected track-type tractors. It is an individual joint-sealing component, not a full undercarriage repair kit. Check the equalizer-bar arrangement and original number before fitting, particularly where earlier repairs have changed the pin or housing. Ruijueparts can assist...
Product Description 335-1414 is an aftermarket control valve seal kit reference for compatible Caterpillar backhoe loaders. A 424B parts manual shows it in a control-valve/control-bank assembly, not a cylinder group. It supports resealing the applicable valve location during control-valve service. The public listing does not identify a universal valve position...
Product Description9168003 is the travel-motor assembly reference used to identify this aftermarket seal kit, not an original seal-kit number. Ruijueparts supplies sealing components for the matched motor rather than a complete motor or final-drive gearbox. Confirm the motor identification and required seal contents before purchase; the machine model alone may...
Product Description 132-6783 is an aftermarket hydraulic blade lift cylinder seal kit for Caterpillar D11N and D11R crawler dozers. It services the left- or right-hand dozer lift cylinders that raise and lower the blade; it is not the blade tilt, ripper or pin-puller kit. Published catalogues identify cylinder 4T2727 for...
Product Description71418473 is offered as a complete aftermarket cylinder sealing set matched through this Fiat-Hitachi reference. The original number identifies a rod-side kit used in different cylinder applications, including FH165 arm and FH215 boom service. A shared rod-kit number does not prove that every piston seal is the same. Tell...
Product Description This aftermarket hydraulic breaker seal kit is for verified Furukawa HB20G hydraulic hammer repair applications. HB20G is an older Furukawa breaker model, and published parts information shows that some individual components may also appear in related Furukawa breaker catalogues. This does not confirm that complete seal kits are...
Product Description240-9538 is an aftermarket hydraulic cylinder seal kit for selected Caterpillar cylinder groups. Reference applications span loaders, excavators and other equipment, so a machine model alone is not enough to select this kit. Record the installed cylinder group and original seal-kit number before ordering, especially where a cylinder has...
Product Description RG538-67560 is an aftermarket boom cylinder seal kit referenced for Kubota U30-3 compact excavator applications. Catalogue data associates this kit with the boom cylinder and a 45 mm rod × 80 mm bore reference size. This matters because the U30-3 uses separate repair-kit references for the dipper, bucket,...
Regular price
$11.94
Regular priceSale price
$11.94
Unit price/ per
Choosing a selection results in a full page refresh.
