Product Description Aftermarket 6669455 hydrostatic motor seal kit for Bobcat 751, 753, 763 and 773 loaders plus S130, S150, S160, S175, S185 and S205 skid-steer models. Compatibility data also lists Soil Conditioner, Drop Hammer, and Angle Broom attachments. The kit reseals the hydrostatic motor that converts pressurized hydraulic flow into...

Product DescriptionYA00001400PS is an aftermarket arm-cylinder seal-kit reference for the Hitachi ZX200-3. The original application table lists a different arm-kit reference for the earlier ZX200, so the generation designation matters when comparing quotations. Verify the cylinder identification rather than shortening the model to ZX200 only. Ruijueparts can help check the...

Product Description VOE17238353 is an aftermarket hydraulic tilt cylinder seal kit for Volvo L220 wheel loaders. It supports the cylinder that curls and dumps the bucket, so it should not be ordered as a lift, steering or grapple seal kit. Published catalogue data confirms L220G tilt cylinders 15086624 and 15128783,...

Product Description For a skid steer with a leaking hydrostatic drive motor or a piston motor scheduled for overhaul, 280-7849 is an aftermarket seal kit reference used within the compatible piston motor assembly. The official reference identifies sealing and service items, including a dust seal, shaft seal, O-rings, piston seal...

Product Description260-0273 is an aftermarket hydraulic cylinder seal kit referenced for Caterpillar D-series backhoe-loader applications. The original catalogue lists 420D, 428D, 430D, 432D, 438D and 442D, but the cylinder group remains the deciding fit check. Avoid choosing a kit only because the machine model is familiar. Ruijueparts can review the...

Product Description 2R-0239 is an aftermarket NBR O-ring replacement referenced by Caterpillar as a 278.99 mm inside-diameter seal. Its listed cross-section is 3.53 mm (0.139 in), with a 75A nitrile material designation and a Dash Size 276 reference. This is an individual O-ring, not a hydraulic cylinder seal kit. It...

Product Description 333/Y6024 is an aftermarket hydraulic boom cylinder seal kit for selected JCB backhoe loader applications. The boom cylinder raises and lowers the rear excavator boom during digging, trenching, lifting, and loading work. JCB identifies this reference as “Seal Kit – Boom,” so it should not be substituted for...

Product Description71466446 is used as the ordering reference for a complete aftermarket arm-cylinder seal kit for a matched Fiat-Hitachi FH165 assembly. The original reference describes a piston-side kit, while the Ruijueparts product is supplied as a complete cylinder sealing set. Confirm the cylinder identification and rod-side arrangement before purchase. This...

Product Description991/10147 is an aftermarket hydraulic cylinder sealing kit identified by its complete JCB reference. The available kit catalogues confirm the cylinder-seal category but do not establish a specific machine model or cylinder position for this offer. Use the original kit number and installed cylinder identification before ordering. Ruijueparts can...

Product Description2442046 is an aftermarket hydraulic cylinder seal-kit reference listed for Caterpillar D8N applications. It should be matched to the installed cylinder rather than selected solely because a machine belongs to the D8 family. Check the cylinder identification and original sealing reference, particularly on equipment that has had a replacement...

Product Description THBB-301 is an aftermarket hydraulic breaker seal kit for a verified TOYO THBB-301 hydraulic hammer. It is used to replace applicable internal sealing elements during planned maintenance, oil-leak diagnosis, or breaker overhaul. The THBB-301 is a breaker attachment; this kit is not for the carrier excavator’s hydraulic cylinders....

Product Description 707-99-66620 is an aftermarket blade tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It services the specified 180 mm bore × 100 mm rod tilt cylinder, reference 707-01-0C800, on D275A-5D crawler dozers with the cold-climate configuration. The tilt cylinder changes blade cross-slope during...

Product Description Ensure the stability of your equipment with the 13765394 Stabilizer Cylinder Seal Kit, designed for SANY BHL75 Backhoe Loaders. As a critical component for safe operation, the stabilizer cylinder must withstand immense pressure and impact during excavation. Our aftermarket seal kit features high-grade materials specifically selected to prevent...

Product DescriptionAHC20489 is an aftermarket cylinder bore seal kit 110mm supplied by Ruijueparts. John Deere lists 310E, 310G, 310J, 310K, 310L and 710K among reference models; a catalogue example is 310L EP boom cylinder AHC14426. This 110 mm bore service kit is not limited to tilt cylinders. Select by the...

Product Description Aftermarket 87573868 hydraulic cylinder seal kit for compatible Case and New Holland backhoe loader 4x1 clamshell bucket cylinder applications. This kit is used to service the multi-purpose front loader bucket hydraulic cylinder, helping replace worn sealing parts, reduce hydraulic oil leakage, and support smooth bucket opening, closing, clamping,...

Product Description223-5945 is an aftermarket hydraulic cylinder seal kit referenced for Caterpillar D-series backhoe loaders. Listed models include 416D, 424D, 428D, 432D and 442D, but each machine has several cylinders with separate repair requirements. Match the original kit number or cylinder group before purchase. Ruijueparts can review a repair list...

Choose the seal kit of Ruijueparts. Slash costly downtime.Fits equipment: 420E, 430E Condition: New – Open box: A new, unused item Brand: CATERPILLAR replacementTarget Audience: Customers with long-term procurement needs for sealing kits, including repair shops, distributors, import/export trading companies, and construction machinery rental companies.

Product Description Aftermarket VOE11712156 lift cylinder seal kit for selected Volvo L330E wheel loaders. It services the hydraulic lift cylinder that raises and lowers the loader boom and bucket during loading and material handling. Catalog data links this kit to cylinder 11107867, machine serial range 62006–99999, and a reference rod...

Product Description245-0584 is an aftermarket hydraulic cylinder seal kit with reference applications on Caterpillar D8L, D9L and D9N track-type tractors. For older equipment, the installed cylinder identification is particularly useful because previous repairs may have changed the assembly or its internal components. Confirm the original kit number and cylinder group...

Product Description Aftermarket VOE17265044 tilt cylinder seal kit for selected Volvo L250G and L250H wheel loaders. It services the hydraulic tilt cylinder that curls and dumps the loader bucket during operation. The reference size is a 120 mm rod × 220 mm bore. The published kit composition includes a scraper,...

Product Description 87428629 is an aftermarket hydraulic bucket cylinder seal kit for selected New Holland backhoe loaders. It is used to rebuild the backhoe bucket cylinder that curls and dumps the digging bucket, not a loader-lift, dipper, steering or stabilizer ram. Official kit data identifies a 63 mm rod-side bearing...

Product DescriptionVOE15196138 is an aftermarket bucket cylinder seal kit referenced for the Volvo BL71B backhoe loader. The listed application concerns the digging bucket cylinder, which curls and opens the rear bucket during excavation. A front-loader tilt cylinder or multi-purpose bucket actuator needs its own service-number check. Ruijueparts can review the...

Choose the seal kit of Ruijueparts. Slash costly downtime. Fits equipment: L180F HL Condition: New – Open box: A new, unused item Brand: VOLVO replacement