Product Description12212125 is an aftermarket rod-side seal kit for the documented Liebherr R920 boom cylinder configuration. For a repair shop, the key buying decision is whether the leak is at the rod end or inside the cylinder: these service areas use separate kits. Check the installed cylinder identification before ordering,...

Product DescriptionT218499 is an aftermarket steering cylinder seal kit supplied by Ruijueparts. John Deere lists 310J, 310K, 310L, 310SJ, 310SK, 315SK, 410J and 410K among compatible equipment references. T218502 is another steering kit used on similar models. Verify axle configuration and the original service number instead of choosing from the...

Product Description156-8208 is an aftermarket transmission overhaul gasket kit referenced for selected Caterpillar track-type tractors and pipelayers. It is intended for sealing work during transmission service, not for a hydraulic cylinder rebuild. Check the transmission arrangement before ordering, particularly on machines that have received a replacement unit. Ruijueparts can review...

Product Description The 288-2549 aftermarket transmission gasket kit is supplied for Caterpillar-compatible IT62G, IT62G II, 950G, 950G II, 962G, 962G II, and 950H equipment. It is used during a complete transmission overhaul to renew applicable sealing interfaces and help control fluid leakage after correct installation. The OEM reference describes this...

Product DescriptionVOE14596398 is an aftermarket travel motor seal kit referenced for Volvo EC290B excavators. A published assembly list associates it with travel motor 14592002, which drives the track through the final-drive reduction assembly. This is a motor sealing repair item, not a complete final drive or a swing motor kit....

Product DescriptionVOE11999906 is an aftermarket steering cylinder seal kit referenced for Volvo L120C and L120D wheel-loader applications. Cylinder 11088537 is the useful assembly reference when checking the match. Steering cylinders articulate the machine, whereas lift and tilt cylinders operate the loader linkage and bucket. Verify the installed cylinder and applicable...

Product Description AH219633K is an aftermarket complete seal kit for verified backhoe dipper crowd cylinders associated with John Deere AH219633. The crowd cylinder moves the rear dipper arm in and out during digging; it differs from the main boom and extendable dipper cylinders. Published references identify a 63 mm rod...

Product DescriptionVOE14589728 is an aftermarket cylinder seal kit whose position depends on the Volvo excavator configuration. Replacement references list bucket applications on EC210B/EC210D and dipper-arm applications on EW140C and EW160C/D/E. An EW160D assembly table associates it with stick cylinder 14640323. This is why selecting by the words arm or bucket...

Product Description087-6654 is an aftermarket bucket cylinder seal-kit reference in replacement catalogues for Caterpillar excavators. The listed families include 325B, 330, 330B and 350, subject to the installed cylinder configuration. A shared machine family is not enough to establish fit for every bucket cylinder. Check the original kit number and...

Product Description 3484453M94 is an aftermarket center-mount stabilizer cylinder seal kit for the rear backhoe assembly. It is referenced for Terex cylinder 3622612M91, with an 89 mm bore and 57.15 mm rod. The stabilizer cylinder deploys the machine’s center-mounted support leg to steady the backhoe while it digs; it is...

Product Description 6592184 is an aftermarket boom cylinder seal kit for the Bobcat 907 Backhoe attachment. It is referenced to boom cylinder assembly 6592180 and a 1.5 in rod × 3.0 in bore configuration. The boom cylinder raises and lowers the main digging boom, while the 907 attachment uses separate...

Product DescriptionVOE14589130 is an aftermarket boom cylinder seal kit referenced for selected Volvo EC240C excavators. Catalogue entries identify cylinders 14551713 and 14551718 with a 105 mm rod and 160 mm bore. Other boom configurations on the same model use different sealing references, so position and machine name must be checked...

Product Description 10X1783 is an aftermarket stabilizer cylinder seal kit for selected Terex backhoe loader applications. Parts information identifies it in the stabilizer cylinder assembly of the Terex TLB 815, while aftermarket catalogues also associate it with selected Terex Vectra TX740S and TX760 applications. Stabilizer-cylinder revisions can differ by model...

Product Description130-6879 is an aftermarket steering axle housing seal referenced for selected Caterpillar wheeled excavators and backhoe loaders. Its application is the drive-and-steering axle group, so it should not be confused with a general hydraulic cylinder kit. Match the axle identification and original seal reference, especially if a replacement axle...

Product DescriptionVOE14506889 is an aftermarket centre swivel joint seal kit referenced for selected Volvo excavators, including EC140, EC210 and EC240 families. The swivel transfers hydraulic oil between the rotating upper structure and undercarriage; it is not the swing motor that turns the machine. Check the installed joint and machine serial...

Product Description 332/G9281 is an aftermarket replacement bucket cylinder seal kit for selected JCB JS200 and JS220 crawler excavators. It is used to rebuild the hydraulic cylinder that curls and dumps the bucket during digging, loading, and material-handling work. Published replacement-kit data identifies an 85 mm rod and 115 mm...

Product Description The 11709677 Slew Cylinder Seal Kit is an aftermarket reseal kit for Volvo BL-series backhoe loaders. Verified application data identifies swing/slew-cylinder service on BL60, BL61, BL61 Plus, BL70, BL71, and BL71 Plus machines. Reference dimensions are a 50 mm rod and 95 mm bore, with serial-number limits varying...

Product DescriptionVOE11998810 is an aftermarket lift cylinder seal kit referenced for Volvo L50C, L50D, L70B, L70C and L70D wheel loaders. Cylinder numbers change between models and production ranges, so the loader name alone is not enough to select the kit. The lift cylinder raises the loader arms; bucket tilt and...

Get a customized device model matching solution now.Condition: New – Open box: A new, unused item Brand: Caterpillar replacement

Product Description AHC16954 is an aftermarket 50 mm hydraulic cylinder rod seal kit reference for John Deere equipment. It services the rod and gland end, not the piston-side bore. A published 772G/GP grader guide lists it for articulation, wheel-lean, blade-lift, blade-tilt, and circle-side-shift cylinders. As one kit may serve different...

Product Description 170-0493 is an aftermarket replacement accumulator seal kit for selected Caterpillar hydraulic accumulator applications. Caterpillar identifies it as a standard 4-inch-bore piston seal kit, not a hydraulic-cylinder, pump, motor, or transmission repair kit. Hydraulic accumulators store and release pressurized oil to support system response, making correct part-number matching...

Product Description The 216-5358 Transmission Overhaul Gasket Kit is an aftermarket replacement for power shift transmissions in Caterpillar wheel loaders. Verified models include 950B, 950E, 950F, and 950F II. It supports disassembly, inspection, resealing, and reassembly during transmission overhaul. Contents may include gaskets, O-rings, and seal types; confirm the packing...

Product Description 234-25-31440 is an aftermarket tandem drive seal for selected Komatsu motor graders. Komatsu classifies this reference under Tandem Drive-related components, placing it in the rear drive assembly rather than the engine, hydraulic cylinder, or transmission-control system. The tandem drive transfers power through the grader’s rear wheel-drive arrangement, where...