Product Description 6803268 is an aftermarket hydraulic cylinder seal kit referenced for selected Bobcat compact excavators. It is not limited to one cylinder function: depending on the machine configuration and cylinder number, the same reference may service an arm, boom, bucket, clamp, or lifting cylinder. The kit is associated with...

Product Description5J-3620 is an aftermarket rod buffer seal for matched Caterpillar hydraulic cylinders. Its role differs from the primary rod seal: it helps shield that seal from pressure changes during cylinder operation. Check the gland arrangement and original reference before selecting an individual ring. A shared rod diameter does not...

Product Description The 387-2867 aftermarket solenoid valve seal kit is a reference replacement for selected Caterpillar-compatible powertrain and hydraulic-control applications. Although described as a kit, the OEM reference identifies it as an O-ring sealing item for a solenoid valve; it is not a complete solenoid valve and not a hydraulic...

Product Description566-33-05015 is an aftermarket rear brake sealing kit referenced for Komatsu HD325-6 and HD405-6 dump truck applications. It services the matching rear brake assembly rather than a hydraulic lifting cylinder. Confirm the truck serial number, axle location and brake assembly before ordering, since front and rear brake service kits...

Product DescriptionFor bucket-cylinder rod-end repairs, 12212134 is offered as an aftermarket replacement kit for the referenced Liebherr R920 application. Confirm the cylinder number rather than relying on the machine name or a similar-looking seal set. The rod-side kit must not be confused with the piston kit when planning a rebuild....

Product Description 10X1783 is an aftermarket stabilizer cylinder seal kit for selected Terex backhoe loader applications. Parts information identifies it in the stabilizer cylinder assembly of the Terex TLB 815, while aftermarket catalogues also associate it with selected Terex Vectra TX740S and TX760 applications. Stabilizer-cylinder revisions can differ by model...

Product Description This aftermarket 561-34-71630 rear brake seal is referenced for selected Komatsu HD785-7 rear axle final brake assemblies. It is an individual internal wet brake service component, used during rear wheel brake maintenance and overhaul. This part is not a complete brake seal kit, floating seal assembly, or hydraulic...

Product Description9849963 is an aftermarket o-ring supplied by Ruijueparts. CNH lists this O-ring for reference dimensions of 50.46 mm inside diameter and 2.61 mm section, across CASE and New Holland catalogue channels. Catalogue availability across brands is not a blanket fit guarantee; identify the specific assembly before ordering. Ruijueparts offers...

Product Description1217637, also written 121-7637, is an aftermarket backup ring referenced for the rear axle of selected Caterpillar wheeled excavators. It is a separate part of the sealing arrangement, not an alternative name for seal ring 121-7639. Keep both references distinct when preparing an axle repair order. Ruijueparts can help...

Product Description2401-9165KT is an aftermarket main pump seal-kit reference covering pump body and regulator sealing. Supplier application tables include Solar 400-V and Solar 450-V configurations, but the fitted pump remains the deciding match. Confirm the pump identification and required sealing components before disassembly or purchase. Ruijueparts supports part-number enquiries for...

Product Description8E-5736 identifies an aftermarket external lip-type piston seal for matching Caterpillar transmission applications. It is a separate sealing ring, not a set containing 8E-5742, 9W-9371 or 8E-5734. These nearby references describe other components and must be checked individually against the transmission diagram. Ruijueparts can help a workshop organise the...

Product Description2401-6250K is an aftermarket swing motor seal kit listed in a Solar 75-V motor parts table with assembly reference 401-00403. The kit services sealing in the motor that rotates the upperstructure; it should not be confused with a travel motor repair set for the same excavator. Compare the installed...

Product Description85819350 is an aftermarket dipper cylinder seal kit supplied by Ruijueparts. A documented CASE 590SR Super R application is dipper cylinder 85820244. The replacement catalogue identifies a 63 mm rod and 4.5 inch bore. Later cylinder 87412696 is listed with a different kit; match the cylinder number rather than...

Product Description The 238-9844 aftermarket shuttle valve seal kit is a reference replacement for compatible Caterpillar wheel loader and integrated tool carrier hydraulic units. The official reference identifies O-rings and backup rings for servicing components in the shuttle valve group; it is not a complete valve assembly, solenoid valve, or...

Product Description122-4575 is an aftermarket bearing lock washer referenced for Caterpillar transmission service on D10-family track-type tractors. It is locking hardware, so it should not be ordered as an oil seal or a cylinder repair kit. Match the original reference and the mating nut arrangement before assembly. A washer that...

Product Description 10X0155 is an aftermarket loader bucket tilt cylinder seal kit for Terex Vectra TX760 backhoe loaders, commonly cross-referenced as SSP5092. It services the front loader bucket tilt cylinder that curls and dumps the loader bucket; it is not for the rear excavator bucket cylinder. Published TLB 740S parts...

Product Description L0X003 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB81N II hydraulic hammers. The Soosan SB-series parts book identifies L0X003 for SB81N II breakers from serial number 4750 onward. If “SB81N-P6000” is the identification shown on your breaker, submit a nameplate photo for confirmation...

Product Description 6803334 is an aftermarket tilt cylinder seal kit referenced for selected Bobcat skid-steer and mini track loaders. It services the hydraulic cylinder that rolls the bucket or attachment forward and back, helping restore controlled tilt movement when seal wear causes leakage or pressure loss. This reference is commonly...

Product Description AH212585 is an aftermarket 110 mm hydraulic-cylinder piston/bore seal kit for John Deere equipment. It is a bore-side kit with a four-piece capped T-seal; data lists no rod seal or wiper. John Deere lists AHC20489 as its substitute bore-seal kit. References place AH212585 in specific backhoe boom, crowd,...

Product Description56B-33-11430 is an aftermarket seal for matching Komatsu equipment assemblies. The manufacturer parts listing identifies HM400-1, HM400-2, HM400-3, HM400-5 and WA800-8 applications. Check the assembly diagram and serial applicability before purchase, because the model name alone does not identify the sealing position. This is a seal component, not a...

Product Description70923596 is an aftermarket o-ring supplied by Ruijueparts. The Fiat-Allis 545/545H loader parts book lists this O-ring at the spindle-to-housing joint, with a 6.75 inch reference inside diameter. It is a single O-ring, not a hydraulic cylinder seal kit; check the axle diagram and housing configuration. For older equipment,...

Product Description2401-9140K is an aftermarket travel motor seal kit with a Solar 290LC-V reference application. It is used for sealing work in the hydraulic drive motor that moves the excavator tracks. A final-drive repair can involve both hydraulic and reduction sections, so identify the leak location and confirm the motor...

Product Description This aftermarket hydraulic breaker seal kit is for verified Furukawa F1 hydraulic hammer repair applications. F1 is an older discontinued breaker model, so serial number and configuration checking are essential before ordering. FRD USA F1 parts information for serial number 5001 and up references KF1-92010 and KF1-92011 seal-kit...

Product Description This aftermarket 561-34-71590 brake backup ring is referenced for selected Komatsu HD785-7 rigid mining dump truck front wheel brake assemblies. It is a single sealing-support component within the brake system, not a hydraulic cylinder seal kit or a complete brake overhaul kit. A backup ring must be installed...