Product Description The 526-1039 aftermarket hydraulic cylinder seal kit is supplied for Caterpillar-compatible 426 and 426 F2 backhoe loaders. It supports hydraulic cylinder resealing during repair work when worn sealing elements may contribute to oil leakage, pressure loss, or reduced operating stability. Correct fitment depends on the specific cylinder group,...

Product Description MT36519 is an aftermarket replacement hydraulic breaker seal kit reference for verified Montabert BRH125 hydraulic hammers. Independent breaker-parts catalogues identify MT36519 for BRH125 service, while 46294 is also used as a legacy cross-reference in some markets. The kit is intended for replacing applicable internal sealing components during planned...

Product Description12207345 is an aftermarket piston seal kit listed for tilt cylinder 11692550 in the Liebherr R920 parts catalogue. This cylinder controls bucket movement, so buyers should distinguish it from the boom and stick cylinders. The piston kit and rod-side kit are separate catalogue entries. Check the cylinder number and...

Product Description RH418-71690 is an aftermarket dozer blade cylinder seal kit for Kubota U27-4 compact excavators, with U27-4CA included in aftermarket application references. Catalogues may call this a dozer cylinder or blade cylinder kit; both terms describe the hydraulic cylinder that raises and lowers the front grading blade. The reference...

Product Description 707-99-66620 is an aftermarket blade tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It services the specified 180 mm bore × 100 mm rod tilt cylinder, reference 707-01-0C800, on D275A-5D crawler dozers with the cold-climate configuration. The tilt cylinder changes blade cross-slope during...

Product Description 258-8600 is an aftermarket replacement radiator seal cross-referenced to 272-5437 for selected Caterpillar modular cooling assemblies. This EPDM rubber seal is 159.4 mm long with a 48 mm inside diameter and is used to seal joints between radiator sections. It is important to confirm the removed seal length...

Product Description2401-9234KT is an aftermarket travel motor seal kit referenced for the Doosan Solar 220LC-V. It is used when servicing sealing in the hydraulic motor that drives the machine, not the motor that swings the upperstructure. Match the full kit number to the installed motor and check the machine serial...

Product Description The 319-3558 Hydraulic Cylinder Seal Kit is an aftermarket replacement for selected Caterpillar D9T, D9R, D8L, and D9N track-type tractors. Cat data confirms a 3-inch (76.2 mm) rod and 4.75-inch (120.65 mm) bore. Industry catalogs document dozer-lift use on selected D9T configurations, including cylinder group 165-8633; do not...

Product Description 86627882 is an aftermarket replacement hydraulic breaker seal kit for the Montabert SC12 hydraulic rock breaker. It is intended for resealing confirmed internal breaker service positions during overhaul, including maintenance after hydraulic oil leakage, pressure loss, or planned breaker dismantling. The SC12 is a compact breaker commonly matched...

Product Description Aftermarket 6659601 hydrostatic drive motor seal kit for compatible Bobcat skid steer loader applications. This kit is referenced for drive motor sealing service, helping replace worn seals, reduce oil leakage, and support stable forward and reverse travel operation. Listed applications include Bobcat 645, 653, 742, 743, 751, and...

Product Overview The 242‑2547 Hydraulic Cylinder Seal Kit is an aftermarket replacement designed to restore hydraulic cylinder sealing performance in Caterpillar construction equipment. Ideal for maintenance and rebuild applications, this kit meets quality expectations for reliable operation and reduced leakage.  Product Details: Part Name:  242-2547 seal kit Machine Models: D6B,...

Product Description The 164-3213 Hydraulic Cylinder Seal Kit is an aftermarket reseal kit for selected Caterpillar skid steer, multi-terrain, compact track, and compact wheel loaders. Published fitment data covers 216–272 skid steer models, 247–297 multi-terrain loaders, 259B3 and 289D compact track loaders, plus 904B/904H wheel loaders. Application is cylinder-group specific;...

Product Description 331/39047 is an aftermarket replacement dipper cylinder seal kit for selected JCB crawler excavators. It is designed to service the arm/dipper hydraulic cylinder, helping technicians renew worn sealing components during cylinder repair. Published repair-kit data identifies a 95 mm rod and 130 mm bore configuration and associates the...

Product Overview The 71470760 hydraulic seal kit is a reliable aftermarket replacement for CASE machinery. Designed for hydraulic cylinders and lift applications, it includes rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent fluid leakage. It is suitable for servicing lift hydraulic cylinders used in...

Product Description The 7X-2704 Tilt Cylinder Seal Kit is an aftermarket replacement for selected Caterpillar 950-series wheel loader cylinders. Application catalogs link it to tilt cylinder group 3G-8786, with documented 950 and 950F uses; some aftermarket sources also list 950B and 950E. The official page names it only as a...

Product Description High-quality aftermarket 7137786 hydraulic cylinder seal kit for Bobcat excavators and loaders. Designed to fit 1.25" rod and 2.25" bore cylinders. This comprehensive kit includes piston seals, rod seals, wipers, and O-rings to effectively prevent leaks and restore hydraulic performance. Durable and reliable for heavy-duty construction use. Item...

Product Description YW182-95312 is an aftermarket hydraulic arm cylinder seal kit referenced for selected Kubota compact excavator applications, including KX41-3, U17, and U17-3 Alpha. This reference is commonly identified for the arm/dipper cylinder, which extends and retracts the digging arm during excavation. Some market listings use broad “bucket/arm cylinder” wording,...

Product Description 61281-000 is an aftermarket replacement shaft seal kit for selected Danfoss Char-Lynn 4000 Series hydraulic motors with a -006 design level. It is intended for servicing the motor’s shaft-end sealing area when leakage is found around the output shaft. Before ordering, confirm the complete motor model code and...

Product Description86900100 is an aftermarket lift piston o-ring supplied by Ruijueparts. Ford 2000 and 3000 tractor parts books list this lift piston O-ring, with a 2.600 inch inside diameter and 0.210 inch section. The piston backup ring is listed separately; this number does not identify a complete lift overhaul kit....

Product Description2274-1008BKT is an aftermarket track adjuster seal kit referenced for selected Doosan Solar 140LC-V applications. It services the track tensioning assembly, helping buyers distinguish this repair from travel motor sealing on the same machine. Keep the complete BKT suffix and check the fitted adjuster against the machine parts diagram...

Product Description 5422590 is an aftermarket hydraulic cylinder seal kit reference for MST backhoe loaders. Trade catalogs identify it as a “kazayak” cylinder repair kit, while published purchasing records describe it broadly as a boom-cylinder repair kit for an MST 544. As these sources do not establish one standardized English...

Product Overview The 160-0496 hydraulic seal kit is a reliable aftermarket replacement for Caterpillar machinery. Designed for hydraulic repair and service applications, it includes V-rings, wear rings, backup rings, and O-rings to restore sealing performance and prevent hydraulic oil leakage. It is widely used in heavy equipment hydraulic systems, where...

Product Description RG538-67560 is an aftermarket boom cylinder seal kit referenced for Kubota U30-3 compact excavator applications. Catalogue data associates this kit with the boom cylinder and a 45 mm rod × 80 mm bore reference size. This matters because the U30-3 uses separate repair-kit references for the dipper, bucket,...

Product Description Premium aftermarket 878000425 arm stick cylinder seal kit fits Komatsu PC95R-2 mini excavators. Designed for heavy-duty leak repair, this kit features high-grade TPU and NBR seals to ensure pressure retention and long service life. Direct replacement for OEM cylinder 226-61-11400. Item specifics Part Number: 878000493 Fits Models: PC95R-2...