Product Description EDT400 is an aftermarket hydraulic breaker seal kit for a verified EDT 400 hydraulic hammer. The EDT 400 is commonly identified by its 68 mm tool diameter; this dimension helps identify the breaker model but does not replace nameplate or seal-size verification. The kit is intended for replacement...

Product Description AH219632K is an aftermarket complete seal kit for verified backhoe boom cylinders associated with John Deere AH219632. This cylinder raises and lowers the rear excavator boom; it is not a loader lift, backhoe bucket, or crowd-cylinder kit. Published data identifies a 56 mm rod and a 110 mm...

Product Description 991/00115 is an aftermarket hydraulic cylinder seal kit for selected JCB construction, telehandler, and excavator applications. This is a multi-application kit, not a single-purpose backhoe seal kit: published fitment data places it in boom, boom-lift, telehandler displacement, tilt, lift, and excavator dozer cylinder positions. The same original reference...

Product Description MT36519 is an aftermarket replacement hydraulic breaker seal kit reference for verified Montabert BRH125 hydraulic hammers. Independent breaker-parts catalogues identify MT36519 for BRH125 service, while 46294 is also used as a legacy cross-reference in some markets. The kit is intended for replacing applicable internal sealing components during planned...

Product Description 258-8600 is an aftermarket replacement radiator seal cross-referenced to 272-5437 for selected Caterpillar modular cooling assemblies. This EPDM rubber seal is 159.4 mm long with a 48 mm inside diameter and is used to seal joints between radiator sections. It is important to confirm the removed seal length...

Product Description COX001 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB40 II hydraulic hammers. The official Soosan SB-series parts book identifies COX001 as the seal kit for SB40 II. It supports resealing applicable internal breaker positions during planned overhaul, leakage inspection, and component servicing. Because...

Product Description This aftermarket hydraulic breaker seal kit is for verified Furukawa HB20G hydraulic hammer repair applications. HB20G is an older Furukawa breaker model, and published parts information shows that some individual components may also appear in related Furukawa breaker catalogues. This does not confirm that complete seal kits are...

Product Description 272-5438 is an aftermarket replacement modular radiator seal for selected Caterpillar heavy-equipment cooling systems. This reference is a high-durometer EPDM rubber seal with a 216.8 mm length and 48 mm inside diameter, used between modular radiator sections to support a sealed cooling assembly. Buyers should verify the exact...

Product Description 991/00095 is an aftermarket hydraulic cylinder seal kit for selected JCB equipment, referenced for a 40 mm rod and 70 mm cylinder bore. It is a multi-application ram kit rather than a single boom or dipper cylinder kit. Published application records place it in designated attachment, stabilizer, shovel,...

Product Description This aftermarket 991/00163 swing cylinder seal kit is referenced for selected JCB backhoe loader swing ram applications with a 50 mm piston rod and 90 mm cylinder bore. The swing cylinder moves the rear excavator assembly from side to side, so it must be distinguished from the boom,...

Product Description 332/G2792 is an aftermarket replacement hydraulic breaker seal kit reference for verified JCB Hammermaster HM386Q hydraulic hammers. The HM386Q parts catalogue identifies 332/G2792 as the seal kit, covering the applicable items marked for the kit in the breaker parts list. It is intended for resealing internal breaker positions...

Product Description This aftermarket hydraulic breaker seal kit is for verified Furukawa F3 hydraulic hammer repair applications. During breaker maintenance, aging or damaged seals can contribute to hydraulic oil leakage and interruption of normal hammer operation. Some aftermarket catalogues reference F3-92010 or F3-92011 for F3 seal kits; however, buyers should...

Product Description AH212092 is an aftermarket hydraulic cylinder bore seal kit reference for selected John Deere construction, agricultural, and forestry equipment. John Deere lists it as a hydraulic cylinder bore seal kit. Published application data identifies a 3-1/4 in bore and 1-7/8 in rod for certain cylinder assemblies, including selected...

Product Description25/929305 is an aftermarket spool seal kit for matching JCB hydraulic control valves. The 531-70 T2 agriculture valve diagram lists this kit separately from the valve-section joint kit, helping buyers identify the correct repair location. Check the installed valve-block number before selecting seals for leakage around a spool. Ruijueparts...

Product Description The aftermarket 19001-12899 boom cylinder seal kit is referenced for the Takeuchi TB260 compact excavator boom cylinder 19001-12800. It is intended for rebuilding a verified 60 mm rod × 100 mm bore hydraulic cylinder when leakage or seal wear requires service. Buyers should identify the cylinder reference and...

Product Description AH165931 is an aftermarket hydraulic cylinder bore seal kit reference for selected John Deere agricultural, forestry, and construction equipment. John Deere identifies the original reference as a hydraulic cylinder kit; replacement catalogs cross it to AHC16965, a 1.969 in. bore seal kit. The bore-side kit differs from a...

Product Description332/H0205 is an aftermarket intersection seal kit for a matching JCB hydraulic valve section. The 541-70 Tier 3 parts catalogue lists this reference in the auxiliary valve section, where seals separate adjoining sections of the valve block. Identify the valve assembly and the location of leakage before selecting a...

Product Description25/223660 is an aftermarket three-O-ring sealing kit for matching JCB solenoid-valve applications. The reference identifies a small service set, not a complete valve block or a cylinder rebuild kit. Match the valve number and the sealing location in the parts diagram before ordering; similar-looking O-rings can differ in size...

Product Description25/975704 is an aftermarket wiper seal for a matching JCB hydraulic valve application. It is an individual sealing component rather than a complete valve-spool or cylinder repair kit. Match the valve reference and the removed wiper profile before ordering; a wiper and an internal pressure seal perform different roles....

Product Description8605261 is an aftermarket steering cylinder seal kit supplied by Ruijueparts. CASE 621F and 721E wheel-loader steering references include cylinder 87452362, with a 1.75 inch rod and 3 inch bore. Do not substitute the larger 8605262 lift-cylinder kit; check the steering cylinder number and installed configuration. Ruijueparts offers reference...

Product Description 47364909 is an aftermarket lift cylinder seal kit for CASE SR175 skid steer loader applications built from May 2013 to December 2019. It services lift cylinder 47364865, which raises and lowers the loader arms, not the bucket tilt or coupler cylinder. Published kit catalogues identify a 1-1/2 in...

Product Description 991/00018 is an aftermarket replacement slew ram seal kit for selected JCB backhoe loader applications using a 110 mm slew or side-shift cylinder. It is intended to renew applicable rod-end and piston-end sealing positions when the slew ram shows hydraulic leakage, reduced holding performance, or requires planned overhaul....