Product Description 1K-6982 is an aftermarket press-in hydraulic cylinder wiper seal for selected Caterpillar equipment. It is a Type A, single-lip wiper designed for a 2.50 in. rod application, not a complete cylinder repair kit. The wiper is fitted at the rod-end gland and cleans the rod as it retracts,...

Product Description9X7720 is an aftermarket rotating-shaft lip seal referenced for selected Caterpillar track-type tractors, wheel tractors and pipelayers. It is kept separate from 2160273 because these numbers do not describe one interchangeable item. Identify the shaft and housing group before ordering and inspect the sealing surface during dismantling. Ruijueparts can...

Part Name: KHV0115 O‑RingMachine Models: Brand: JCB replacementType: O‑Ring SealApplication: Used in hydraulic systems, fluid interfaces, or mechanical joints in JCB construction equipment to maintain tight sealing and prevent leakage of oils, fluids, or contaminants.Size: Standard SizeSupply Ability: 10,000 sets per monthPerformance: Oil SealingPlace of Origin: ChinaPackaging Details: PP bag, cartonPrice:...

Product Description122-4575 is an aftermarket bearing lock washer referenced for Caterpillar transmission service on D10-family track-type tractors. It is locking hardware, so it should not be ordered as an oil seal or a cylinder repair kit. Match the original reference and the mating nut arrangement before assembly. A washer that...

Product Description1B6161 is an aftermarket nut lock identified in the Caterpillar catalogue as a torque-converter housing retention component. The reference may also appear as 1B-6161. It should be selected as locking hardware rather than a sealing ring, even though its ring-shaped profile can resemble other service parts. Confirm the mating...

Product Description This aftermarket 569-33-71510 rear brake piston ring is referenced in selected Komatsu mining dump truck rear axle and rear wheel brake assemblies. It is an individual ring used with the brake piston and adjacent sealing components during brake overhaul; it is not a complete brake seal kit or...

Product Description86529541 is an aftermarket o-ring supplied by Ruijueparts. The original CNH reference identifies an O-ring with 32.91 mm inside diameter and 3.53 mm section. Its use must be matched to the specific joint in the parts diagram. Do not infer pressure or temperature ratings for this aftermarket item from...

Product Description161097A1 is an aftermarket o-ring supplied by Ruijueparts. The CASE Construction catalogue identifies this part as an individual O-ring and lists it in hydraulic service assemblies. The catalogue reference alone does not establish a universal excavator fit; supply the machine serial and diagram position. Neutral or customer-specified packaging is...

Product Description85800003 is an aftermarket back-up ring supplied by Ruijueparts. CNH listings identify this as a back-up ring; it is included in service groups such as hydraulic cylinder kit 87428868. The surrounding kit number is not an interchangeable part number. Order the individual ring or full kit according to repair...

Product Description8R-0957 is an aftermarket repair kit referenced for a matching Caterpillar air-over-hydraulic cylinder. The original application list includes 824C wheel dozers and 980C, 980F and 980F II wheel loaders. This is a specific cylinder service application, not a universal loader lift or tilt seal kit. Confirm the installed air-over-hydraulic...

Product Description093-1434 is an aftermarket lip-type seal referenced for Caterpillar excavator linkage applications. It is a separate sealing component rather than a complete hydraulic cylinder kit. Match the specified joint and original reference before ordering; the same machine can use different seals at neighbouring pivot positions. Ruijueparts can help review...

Product Description5P8843 is an aftermarket pin lip seal for matched Caterpillar oscillating-joint applications, including listed motor-grader linkage positions. A greased pin joint has different requirements from a pressure cylinder gland, so use the assembly reference to identify the seal correctly. Check the pin and housing surfaces while the joint is...

Product Description2401-9144K is an aftermarket main pump O-ring kit listed in the Solar 170W-III main pump diagram. The diagram separates this sealing set from the regulator, rotary groups and pump assemblies, helping buyers distinguish a seal order from a larger overhaul. Verify the fitted pump and serial-specific parts information before...

Product Description1217637, also written 121-7637, is an aftermarket backup ring referenced for the rear axle of selected Caterpillar wheeled excavators. It is a separate part of the sealing arrangement, not an alternative name for seal ring 121-7639. Keep both references distinct when preparing an axle repair order. Ruijueparts can help...

Product Description This aftermarket 569-33-71520 rear brake ring is referenced in selected Komatsu mining dump truck rear axle and rear wheel brake assemblies. It is an individual component positioned within the brake-piston arrangement during brake servicing; it is not a complete seal kit, hydraulic cylinder kit, or general-purpose O-ring. Although...

Product Description85999136 is an aftermarket control valve lip seal supplied by Ruijueparts. New Holland loader-backhoe control-valve diagrams list this lip seal, with reference dimensions 17.6 mm ID, 26.84 mm OD and 5.42 mm thickness. One catalogue revision introduces this seal from September 1995; check the valve revision before replacing an...

Product Description242-6833 is an aftermarket hydraulic cylinder seal ring, supplied as a component reference rather than a complete cylinder repair kit. It is relevant to selected Caterpillar excavator and material-handling applications. When buying an individual ring, compare the original part number and the installed groove arrangement before deciding what else...

Product DescriptionWhen servicing a bearing retention arrangement, use the complete 2P4471 reference rather than selecting a ring by appearance. Catalogued as 2P-4471, this aftermarket bearing nut lock is mechanical hardware for matching Caterpillar assemblies. It is not an O-ring or a hydraulic seal kit. Verify the mating nut and locating...

Product DescriptionFor transfer-gear bearing retention, 6V1071 is an aftermarket lock-washer reference used on matching Caterpillar equipment. The catalogue includes D9-family tractors and several road reclaimers, but compatibility still depends on the installed assembly. This component retains an adjusted nut; it is not a replacement for correct bearing adjustment or a...

Product Description5J-3620 is an aftermarket rod buffer seal for matched Caterpillar hydraulic cylinders. Its role differs from the primary rod seal: it helps shield that seal from pressure changes during cylinder operation. Check the gland arrangement and original reference before selecting an individual ring. A shared rod diameter does not...

Product Description6P1735 is an aftermarket bearing nut lock washer for Caterpillar reference applications in drivetrain service. The original reference is written 6P-1735 in the parts catalogue. A correct repair depends on the specified nut-lock arrangement, not just a ring that fits over the shaft. Check the tab geometry and assembly...

Product Description86900100 is an aftermarket lift piston o-ring supplied by Ruijueparts. Ford 2000 and 3000 tractor parts books list this lift piston O-ring, with a 2.600 inch inside diameter and 0.210 inch section. The piston backup ring is listed separately; this number does not identify a complete lift overhaul kit....

Product Description6V2404 is an aftermarket bearing lock washer for matching Caterpillar bevel-gear, transfer-gear and transmission arrangements. Its role is mechanical retention; it does not seal oil around a shaft. Match catalogue reference 6V-2404 and the installed nut arrangement before ordering, particularly on rebuilt drivetrains. Ruijueparts can help organise a repair...

Product Description AH173410 is an aftermarket 80 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies AH173410 as a hydraulic cylinder piston, rather than a complete rod-and-bore seal kit. It is the piston-side assembly that provides sealing within compatible 80 mm bore cylinders. Published dimensions list a 30.58...