Product Description8E5742, catalogued as 8E-5742, is an aftermarket internal sealing ring for matching Caterpillar transmission assemblies. It differs from the external piston-seal references often listed beside it in overhaul parts lists. Match the internal sealing position and original number rather than choosing by a similar photograph. Ruijueparts can review a...

Product Description The 7D-8436 D-Ring Seal is an aftermarket replacement transmission seal ring for selected Caterpillar motor graders. Its official reference inside diameter is 152.40 mm. The seal supports clutch operation in transmissions and torque converters by allowing oil to pass from a stationary component to a rotating component while...

Product Description5P8843 is an aftermarket pin lip seal for matched Caterpillar oscillating-joint applications, including listed motor-grader linkage positions. A greased pin joint has different requirements from a pressure cylinder gland, so use the assembly reference to identify the seal correctly. Check the pin and housing surfaces while the joint is...

Product DescriptionThis KBP1 NBR oil seal is supplied to the stated 25 x 36.5 x 6/9 specification for buyers matching an individual replacement seal. Order by the complete profile, material and dimensional reference rather than by outside appearance alone. No equipment-brand or machine-model fit is claimed from this size code....

Product Description 287-33-11271 is an aftermarket individual wheel brake seal for the Komatsu WS23S-2A motor scraper, S/N 3101-Up. The parts catalogue lists this seal within brake service kit 287-33-05013, together with 287-33-11261 and other brake sealing items; it is not the complete service kit itself. This distinction helps maintenance teams...

Product Description2160273 is an aftermarket rotating-shaft lip seal referenced across selected Caterpillar loaders, tractors and underground trucks. This listing keeps it separate from 9X7720, which is a different seal reference, rather than treating a group of numbers as interchangeable. Confirm the installed shaft and housing arrangement before ordering. Ruijueparts can...

Product Description86529541 is an aftermarket o-ring supplied by Ruijueparts. The original CNH reference identifies an O-ring with 32.91 mm inside diameter and 3.53 mm section. Its use must be matched to the specific joint in the parts diagram. Do not infer pressure or temperature ratings for this aftermarket item from...

Product Description This aftermarket 561-33-71450 rear brake backup ring is referenced for the rear wheel and rear axle final brake assembly of selected Komatsu HD785-7 rigid mining dump trucks. It is an individual brake sealing-support component, not a complete seal kit or a standard O-ring. The ring is listed in...

Product Description421-33-11440 is an aftermarket seal ring for a matching Komatsu wet disc brake assembly. It is an individual sealing component rather than a complete brake repair kit. The brake assembly and seal position are the key checks when purchasing; a similar-looking ring or nearby part number does not confirm...

Product Description154487A1 is an aftermarket o-ring supplied by Ruijueparts. The official CNH catalogue identifies 154487A1 as an O-ring, also referenced in New Holland construction service groups. The same reference may appear across brands, but that does not establish fit for every machine from either brand. Ruijueparts offers reference lookup through...

Product Description130-6877 is an aftermarket sealing-ring reference used in selected Caterpillar wheeled-excavator and backhoe-loader applications. It is a distinct component from 130-6879, despite the similar numbers and their appearance in related repair lists. Use the assembly diagram to identify the exact sealing position before ordering. Ruijueparts can assist with reference...

Product Description2559331 is an aftermarket wear ring referenced for Caterpillar motor-grader final-drive service. A wear ring guides and supports the matched component; it should not be confused with a pressure-retaining lip seal or a complete final-drive repair kit. Check the original reference and groove position before purchase. Ruijueparts can help...

Product Description This aftermarket 561-33-71471 brake backup ring is referenced for selected Komatsu HD785-7 front axle brake assemblies. It is an individual support ring in the brake sealing arrangement, not a complete brake seal kit or a standard O-ring. The reference is listed in both left- and right-hand front brake...

Product Description 17M-15-05110 is an aftermarket transmission service kit matched 1:1 to the original Komatsu repair kit reference. It is used for transmission service on specified D275A-5 and D275AX-5 crawler dozer configurations. This product belongs to the transmission assembly, while 17M-13-05040 is a separate torque converter service-kit reference; the two...

Product Description 17M-13-05040 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair kit reference. It is designed for service work on the torque converter assembly in a specified D275A-5D crawler dozer configuration. The torque converter transfers engine power through the powertrain, so its sealing components...

Product Description This aftermarket 561-33-71480 brake backup ring is referenced for the front wheel brake assembly of selected Komatsu HD785-7 rigid mining dump trucks. It is an individual sealing-support ring used within the brake assembly, rather than a complete seal kit or a standard O-ring. When the brake assembly is...

Product DescriptionXP00000084PS is an aftermarket cylinder sealing-kit reference listed for Hitachi ZX240-3 applications. Confirm the full kit reference and cylinder identification before purchase, as the available listing does not establish a single universal cylinder position. A matching excavator model is useful context, but it is not enough to verify every...

Product Description This aftermarket 561-34-71680 brake backup ring is referenced for selected Komatsu HD785-7 rigid mining dump truck front wheel brake assemblies. It is an individual backup ring within the brake sealing arrangement, not a complete seal kit or a general-purpose O-ring. During brake service, the ring must be matched...

Product Description267-9166 is an aftermarket sealing ring referenced for matching Caterpillar wheeled-excavator axle applications. It is a separate component from rectangular ring 267-9167; similar part numbers do not establish interchangeability. Check the axle group and individual groove position before ordering. Ruijueparts can review the parts diagram and consolidate the required...

Product Description Product Description 707-98-52140 is an aftermarket tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It services the specified crawler dozer blade tilt and tilt/pitch cylinders, helping maintain blade cross-slope adjustment during grading, leveling, and material spreading. This kit is associated with 70 mm...

Product Description267-8984 is an aftermarket O-ring referenced for Caterpillar wheeled-excavator axle sealing. It is distinct from 267-8985, which appears in related assemblies but has a different reference specification. Check the axle diagram and exact groove before purchase instead of treating the pair as interchangeable. Ruijueparts can review a list of...

Product Description71418514 is offered as the ordering reference for a complete aftermarket cylinder seal kit for matched Fiat-Hitachi equipment. The original reference is a piston-side kit and appears in more than one cylinder application, including FH165 boom and FH215 bucket service. That does not make their complete sealing sets interchangeable....

Product Description4213311480 is an aftermarket seal referenced as 421-33-11480 in Komatsu replacement-parts catalogues. Listed equipment families include WA400, WA420, WA450 and WA470 loaders, plus HM250 and HM300 articulated trucks. These references guide identification rather than confirming every serial configuration. Match the exact assembly diagram and removed seal profile before ordering....

Product Description 6I-2435 is an aftermarket replacement radiator spacer for selected Caterpillar cooling-system assemblies. This EPDM rubber component has an 80 mm inner diameter, a 108 mm outer diameter, and a 25 mm thickness. It creates the required clearance between the radiator and its mounting structure within radiator or aftercooler...