Product Description2401-9242KT is an aftermarket swing motor seal kit with a documented Daewoo/Doosan S470LC-V reference application. It services sealing in the motor that turns the excavator upperstructure, rather than the boom, arm or bucket cylinders. A model match is a starting point: verify the installed motor and original kit reference...

Product Description2401-9247KT is an aftermarket swing motor seal kit for selected Doosan excavators. The Solar 130W-V parts diagram lists this reference in the swing motor service group. This motor rotates the upperstructure during digging and loading; it is a different repair position from the travel drive. Match the motor assembly...

Choose the seal kit of Ruijueparts. Slash costly downtime. Condition: New – Open box: A new, unused item Brand: HITACHI replacement

Product Description AT85197 is an aftermarket flat-face O-ring assortment kit for servicing compatible John Deere hydraulic connections. The reference kit contains 80 O-rings in eight common sizes, listed as 90-durometer O-rings for #4, #6, #8, #10, #12, #16, #20, and #24 fittings. It is intended for fitting-level maintenance, not for...

Product Description2559331 is an aftermarket wear ring referenced for Caterpillar motor-grader final-drive service. A wear ring guides and supports the matched component; it should not be confused with a pressure-retaining lip seal or a complete final-drive repair kit. Check the original reference and groove position before purchase. Ruijueparts can help...

Product Description8E5742, catalogued as 8E-5742, is an aftermarket internal sealing ring for matching Caterpillar transmission assemblies. It differs from the external piston-seal references often listed beside it in overhaul parts lists. Match the internal sealing position and original number rather than choosing by a similar photograph. Ruijueparts can review a...

Product Description The 7D-8436 D-Ring Seal is an aftermarket replacement transmission seal ring for selected Caterpillar motor graders. Its official reference inside diameter is 152.40 mm. The seal supports clutch operation in transmissions and torque converters by allowing oil to pass from a stationary component to a rotating component while...

Product Description121-7639 is an aftermarket seal ring referenced for Caterpillar steering-axle applications on selected wheeled excavators. It should be ordered separately from backup ring 121-7637, even where both appear in the same axle repair. Match the exact assembly and sealing position before purchase. Ruijueparts can review a multi-part axle list...

Product Description This aftermarket 569-33-71510 rear brake piston ring is referenced in selected Komatsu mining dump truck rear axle and rear wheel brake assemblies. It is an individual ring used with the brake piston and adjacent sealing components during brake overhaul; it is not a complete brake seal kit or...

Product Description AH173410 is an aftermarket 80 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies AH173410 as a hydraulic cylinder piston, rather than a complete rod-and-bore seal kit. It is the piston-side assembly that provides sealing within compatible 80 mm bore cylinders. Published dimensions list a 30.58...

Product Description 711-60-05030 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair kit reference. It is used for service work on the torque converter in the specified D375A-5D crawler dozer powertrain configuration. The torque converter transfers engine power into the transmission system, making the original...

Product Description AH205062 is an aftermarket 100 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies it as a hydraulic cylinder piston, not a complete seal kit. This piston-side assembly incorporates sealing and bearing elements for cylinders built around its specific piston geometry. Published reference dimensions include a...

Product Description1217637, also written 121-7637, is an aftermarket backup ring referenced for the rear axle of selected Caterpillar wheeled excavators. It is a separate part of the sealing arrangement, not an alternative name for seal ring 121-7639. Keep both references distinct when preparing an axle repair order. Ruijueparts can help...

Product Description86900100 is an aftermarket lift piston o-ring supplied by Ruijueparts. Ford 2000 and 3000 tractor parts books list this lift piston O-ring, with a 2.600 inch inside diameter and 0.210 inch section. The piston backup ring is listed separately; this number does not identify a complete lift overhaul kit....

Product Description56B-33-11430 is an aftermarket seal for matching Komatsu equipment assemblies. The manufacturer parts listing identifies HM400-1, HM400-2, HM400-3, HM400-5 and WA800-8 applications. Check the assembly diagram and serial applicability before purchase, because the model name alone does not identify the sealing position. This is a seal component, not a...

Product Description267-8985 is an aftermarket O-ring referenced for the steering axle on selected Caterpillar wheeled excavators. It is an individual sealing component rather than a full axle repair kit. The nearby 267-8984 reference describes another ring, so verify the exact groove and original number before ordering. Ruijueparts can assist with...

Product Description This aftermarket 569-33-71520 rear brake ring is referenced in selected Komatsu mining dump truck rear axle and rear wheel brake assemblies. It is an individual component positioned within the brake-piston arrangement during brake servicing; it is not a complete seal kit, hydraulic cylinder kit, or general-purpose O-ring. Although...

Product Description267-9167 is an aftermarket rectangular seal ring for matching Caterpillar wheeled-excavator assemblies. Its cross-section is a key part of the application, so a round O-ring of similar diameter should not be assumed suitable. Keep this reference separate from 267-9166 in an axle repair list and verify the exact groove...

Product Description154487A1 is an aftermarket o-ring supplied by Ruijueparts. The official CNH catalogue identifies 154487A1 as an O-ring, also referenced in New Holland construction service groups. The same reference may appear across brands, but that does not establish fit for every machine from either brand. Ruijueparts offers reference lookup through...

Product Description 17M-15-05121 is an aftermarket transmission control valve service kit matched 1:1 to the original Komatsu kit reference. It is used for servicing the transmission control valve on selected D155AX-5, D275A-5, and D275AX-5 crawler dozers. This valve manages transmission hydraulic circuits and gear-control functions within the powertrain; it is...

Product Description 17M-13-05040 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair kit reference. It is designed for service work on the torque converter assembly in a specified D275A-5D crawler dozer configuration. The torque converter transfers engine power through the powertrain, so its sealing components...

Product Description 17M-15-05110 is an aftermarket transmission service kit matched 1:1 to the original Komatsu repair kit reference. It is used for transmission service on specified D275A-5 and D275AX-5 crawler dozer configurations. This product belongs to the transmission assembly, while 17M-13-05040 is a separate torque converter service-kit reference; the two...

Product Description122-4575 is an aftermarket bearing lock washer referenced for Caterpillar transmission service on D10-family track-type tractors. It is locking hardware, so it should not be ordered as an oil seal or a cylinder repair kit. Match the original reference and the mating nut arrangement before assembly. A washer that...