Product Description 10X1354 is an aftermarket loader lift cylinder seal kit referenced for Terex Vectra TX760 backhoe loader applications. It is intended for the front loader lift cylinder, which raises and lowers the loader arms; it is not a rear excavator boom or dipper-cylinder repair kit. Published seal references group...

Product Description 5001982M91 is an aftermarket low-spec loader lift cylinder seal kit for selected Terex/Fermec backhoe loaders. It is referenced for Wipro cylinder 6109310M91 and a 50 mm rod × 85 mm bore. The loader lift cylinder raises and lowers the front loader arms; it is different from the front...

Product DescriptionA G720 grader can use the VOE12724306 seal-kit reference in more than one cylinder position. Replacement-parts catalogues list blade-lift and slide-shift applications, so identifying the cylinder being serviced is essential before purchase. Ruijueparts supplies this aftermarket reference for buyers sourcing grader repair parts. Send the original kit number, cylinder...

Product Description114-4850 is an aftermarket hoe-stick lip-type seal identified by its complete Caterpillar reference. This is a linkage sealing component, so a buyer should check the joint location rather than assume it is a hydraulic cylinder repair kit. Similar-looking pin seals can have different profiles and seating dimensions. Ruijueparts can...

Product Description AL161335 is an aftermarket steering-cylinder seal kit for selected John Deere agricultural tractors. John Deere identifies the reference as a tie-rod seal kit, while aftermarket catalogs associate it with a front steering-cylinder assembly. It is not an engine seal kit and should not be selected by tractor model...

Product Description Aftermarket VOE15173615 stabilizer cylinder seal kit for selected Volvo BL60, BL60B, BL70, and BL70B backhoe loaders. It services the hydraulic outrigger cylinder that extends and retracts the stabilizer leg to support and level the machine during backhoe digging. Application records associate the kit with stabilizer cylinder 16202584. Fitment...

Product Description AT280406 is an aftermarket hydraulic control-valve spool seal kit for selected John Deere construction equipment. It reseals the movable spool section inside a control valve and may help address leakage or control loss from worn seals. It is not a hydraulic cylinder, pump, or engine seal kit. Parts...

Product Description 336/E7315 is an aftermarket hydraulic slew ram seal kit referenced for selected JCB backhoe loader applications. The slew, also called swing or side-shift ram, moves the backhoe assembly laterally for working alongside walls, trenches, or obstructions. This is a position-specific cylinder kit and should not be substituted for...

Product Description7255578 is an aftermarket seal kit referenced for the two-speed hydrostatic drive motor on selected Bobcat compact track loaders. The original listing includes T450, T550, T590, T595, T62, T630, T64, T650, T66 and T76, subject to serial-number checks. Identify the installed motor before ordering, especially after a drive-motor replacement....

Product Description 5004400M91 is an aftermarket backhoe boom cylinder seal kit referenced for Terex/Fermec backhoe loaders equipped with Pacoma cylinder 5000121M91. The catalogued cylinder size is 65 mm rod × 115 mm bore. This distinction matters: a boom kit is not interchangeable with the dipper, swing, bucket, stabilizer, or front-loader...

Product DescriptionVOE14589146 is an aftermarket hydraulic cylinder seal kit referenced for Volvo EC460C L and EC460C LD excavators. Replacement catalogues associate it with cylinder 14563828, using an 80 mm rod and 160 mm bore as identification dimensions. The catalogue labels this application as hydraulic, so a boom, arm or bucket...

Product Description Aftermarket 6691341 hydrostatic motor seal kit for Bobcat S450 and S460 skid-steer loaders and Soil Conditioner, Tiller and Angle Broom attachments. It is intended to reseal the hydrostatic motor, which converts hydraulic flow into rotary drive motion for machine propulsion or attachment operation. Parts may vary by equipment...

Product DescriptionVOE14596398 is an aftermarket travel motor seal kit referenced for Volvo EC290B excavators. A published assembly list associates it with travel motor 14592002, which drives the track through the final-drive reduction assembly. This is a motor sealing repair item, not a complete final drive or a swing motor kit....

Product Description Aftermarket VOE11709898 steering cylinder seal kit for selected Volvo BL60, BL61, BL70, and BL71 backhoe loaders equipped with the applicable steering axle cylinder. It reseals the hydraulic steering cylinder to help control fluid leakage and restore pressure during left and right steering movement. Reference cylinder dimensions are 38...

Product DescriptionVOE14577802 is an aftermarket arm cylinder seal kit referenced for the Volvo EW145B wheeled excavator. The arm cylinder moves the dipper during digging, so its service kit should be identified separately from boom and bucket kits. Match the original kit number to the installed cylinder before planning the repair,...

Product Description This aftermarket 428-33-11480 brake seal is referenced for selected Komatsu WA700 wheel loader wet brake assemblies. It is an individual internal brake sealing component installed with the brake piston arrangement; it is not a hydraulic cylinder seal kit, floating seal assembly, or complete brake repair kit. On WA700...

Product Description543-9708 is an aftermarket steering cylinder seal kit identified in the Caterpillar 140 GC parts manual for cylinder group 532-9478. The same steering arrangement contains another cylinder group with a different kit, so the cylinder number is essential when ordering. This offer covers resealing rather than replacement of the...

Product Description The VOE11709543 Dipper Cylinder Seal Kit is an aftermarket reseal kit for Volvo BL-series backhoe loaders. Catalogs identify dipper-arm cylinder service on BL70, BL71, and BL71 Plus machines. Reference dimensions are a 60 mm rod and 120 mm bore. Published fitment starts at serial 10001 for BL70 and...

Product Description 1543274C1 is an aftermarket hydraulic cylinder seal kit for selected CASE backhoe loader and crawler dozer/loader applications. This reference is used across more than one cylinder function, including specified dipper, loader lift, loader bucket, and loader clam cylinders. For distributors, the key is cylinder-level identification—not machine model alone....

Product Description8605262 is an aftermarket lift cylinder seal kit supplied by Ruijueparts. CASE 721D and 721E wheel-loader lift references include cylinders 8605290 and 87318066, with a 3 inch rod and 4.75 inch bore. The bucket and steering cylinders use separate repair references; match the lift cylinder before ordering. Neutral or...

Product Description Restore precise hydraulic performance and stop fluid bypass with this premium aftermarket 991/00110 hydraulic cylinder seal kit, engineered for JCB machinery. Specifically tailored for standard cylinders featuring a 45mm rod diameter and 80mm bore size, this heavy-duty kit utilizes high-grade PU, NBR, and PTFE components to endure continuous...

Product Description Aftermarket 86613643 bucket tilt cylinder seal kit for Case skid steer loader and compact track loader applications. This kit is used to rebuild loader bucket or attachment tilt cylinders with a 2-3/4 in bore and a 1-3/8 in rod size, helping replace worn seals, reduce hydraulic oil leakage,...

Product Description 23A-15-05055 is an aftermarket transmission service gasket kit matched 1:1 to the original Komatsu kit-number reference. It is used when servicing specified transmission-related assemblies on Komatsu motor graders. Unlike a hydraulic cylinder repair kit, this SKU belongs to the grader powertrain service system. Verified applications include GD505A-3A, GD511A-1,...

Product Description Product Description 707-98-52140 is an aftermarket tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It services the specified crawler dozer blade tilt and tilt/pitch cylinders, helping maintain blade cross-slope adjustment during grading, leveling, and material spreading. This kit is associated with 70 mm...