Product Description AHC13362 is an aftermarket 63 mm hydraulic cylinder rod seal kit for John Deere equipment. It seals the rod and gland end, not the piston-side bore. It is used on selected backhoe loaders, wheel loaders, crawler dozers, forestry machines, and tractors. Cross-reference data associates it with AH149815, including...

Product Description MT36519 is an aftermarket replacement hydraulic breaker seal kit reference for verified Montabert BRH125 hydraulic hammers. Independent breaker-parts catalogues identify MT36519 for BRH125 service, while 46294 is also used as a legacy cross-reference in some markets. The kit is intended for replacing applicable internal sealing components during planned...

Product Description2401-9242KT is an aftermarket swing motor seal kit with a documented Daewoo/Doosan S470LC-V reference application. It services sealing in the motor that turns the excavator upperstructure, rather than the boom, arm or bucket cylinders. A model match is a starting point: verify the installed motor and original kit reference...

Product Description 991/00018 is an aftermarket replacement slew ram seal kit for selected JCB backhoe loader applications using a 110 mm slew or side-shift cylinder. It is intended to renew applicable rod-end and piston-end sealing positions when the slew ram shows hydraulic leakage, reduced holding performance, or requires planned overhaul....

Product Description56B-33-11430 is an aftermarket seal for matching Komatsu equipment assemblies. The manufacturer parts listing identifies HM400-1, HM400-2, HM400-3, HM400-5 and WA800-8 applications. Check the assembly diagram and serial applicability before purchase, because the model name alone does not identify the sealing position. This is a seal component, not a...

Product Description C3X005 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB81 hydraulic hammers. The Soosan SB-series parts book identifies C3X005 for the SB81 configuration. It is used when servicing internal breaker sealing positions during planned overhaul, oil leak inspection, or component repair. SB81 must not...

Product Description2401-9237KT is an aftermarket travel motor seal kit for matched Doosan/Daewoo hydraulic drive applications. Use the complete reference and motor identification to select the repair parts; a travel motor kit is not a swing motor or hydraulic pump kit. Machine model and serial details are useful when the original...

Product Description6686865 is an aftermarket swivel joint seal supplied by Ruijueparts. The E20z hydraulic swivel diagram lists this seal separately from 7225616 and the back-up ring, even though these items can be needed in the same repair. Match the original service number, machine serial number and installed assembly before ordering....

Product Description Restore full dynamic force and eliminate high-pressure fluid leaks with this premium aftermarket 69000801 hydraulic bucket cylinder seal kit, engineered specifically for JCB JS200 and JS220 20-22 ton tracked excavators. This comprehensive ram rebuild kit features heavy-duty rod seals, dynamic piston seals, wear rings, and high-elasticity O-rings optimized...

Product Description 476/06801 is an aftermarket hydraulic seal kit listed for the rear lift cylinder on JCB Fastrac agricultural tractor applications. Specialist seal catalogues identify it as a 75 mm rear-lift-cylinder kit, distinguishing it from reference 477/01030, which is listed for an 80 mm rear lift cylinder. The rear lift...

Product Description21122-000 is an aftermarket seal kit reference for Eaton Char-Lynn S/207-series torque generators. The kit is intended for service of the matching hydraulic steering motor or torque generator. Confirm the complete unit model and original kit number before ordering, since series variants can differ. Ruijueparts offers part-number lookup across...

Product DescriptionK9003707 is an aftermarket chocking cylinder seal kit for the matched Doosan application. This kit services the chocking cylinder and must not be ordered as a bucket-cylinder kit. Confirm the actual cylinder and serial-specific parts list before repair. Ruijueparts can review the original part number and assembly details before...

Product Description6K2430 is an aftermarket rotating-shaft lip seal with reference applications across Caterpillar wheel loaders, compactors and underground loaders. It is a single sealing item rather than an axle overhaul kit. Match the installed housing and original reference before ordering; equipment families alone do not establish the correct shaft position....

Product Description 07309-0KT is an aftermarket center joint seal kit for the Doosan SOLAR 035 excavator. The center joint, also called a swivel joint or rotary manifold, carries hydraulic oil between the rotating upper structure and the lower undercarriage while the machine slews. This kit is used to renew the...

Product Description C1X001 is an aftermarket replacement hydraulic breaker seal kit reference for verified Soosan SB50 hydraulic hammers. The official Soosan SB-series parts book lists C1X001 as the seal kit for SB50. It is intended for replacing applicable internal breaker seals during overhaul, oil-leak inspection, or repair work. If the...

Product Overview The 991/10130P hydraulic seal kit is a reliable aftermarket replacement for JCB machinery. Designed for hydraulic cylinders and ram lift applications, it includes rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent fluid leakage. Ideal for telehandlers, wheel loaders, and other JCB hydraulic...

Product DescriptionXP00000080PS is an aftermarket sealing-kit reference for Hitachi hydraulic service. Keep the full reference, including the PS suffix, when comparing a quotation or an old package label. Similar XP numbers in a parts list do not establish that the kits interchange, and a complete machine-fit list has not been...

Product Description 1543274C1 is an aftermarket hydraulic cylinder seal kit for selected CASE backhoe loader and crawler dozer/loader applications. This reference is used across more than one cylinder function, including specified dipper, loader lift, loader bucket, and loader clam cylinders. For distributors, the key is cylinder-level identification—not machine model alone....

Product DescriptionAHC16966 is an aftermarket cylinder bore seal kit supplied by Ruijueparts. John Deere loader references include 400CX, 400X, 410, 419, 420, 430, 460, 510 and 512; dealer listings specify serial 013118 onward for several earlier loader models. This is a bore-side service reference. The loader attachment number and cylinder...

Product DescriptionK9002875A is an aftermarket swing motor seal kit for the matched Doosan application. Keep the A suffix when checking the original kit. Motor versions and serial breaks matter, especially where a replacement motor has been installed. Ruijueparts can review the original part number and assembly details before supply, helping...

Product Description AH225672 is an aftermarket 3/8 in cartridge seal kit reference for selected John Deere combine single-point hydraulic coupler systems. It services the seal cartridge associated with a 3/8 in hydraulic quick-coupler socket, helping maintain a sealed hydraulic connection during header connection, disconnection, and operation. It is not a...

Product Description8605262 is an aftermarket lift cylinder seal kit supplied by Ruijueparts. CASE 721D and 721E wheel-loader lift references include cylinders 8605290 and 87318066, with a 3 inch rod and 4.75 inch bore. The bucket and steering cylinders use separate repair references; match the lift cylinder before ordering. Neutral or...

Product Description 6810719 is an aftermarket arm cylinder seal kit for selected Bobcat 331, 331E, and 334 compact excavators. It rebuilds the hydraulic arm cylinder that extends and retracts the dipper during excavation, trenching, and loading work. The kit is associated with cylinder references 6810565 and 7148240 and has a...

Product Description The aftermarket 19001-12899 boom cylinder seal kit is referenced for the Takeuchi TB260 compact excavator boom cylinder 19001-12800. It is intended for rebuilding a verified 60 mm rod × 100 mm bore hydraulic cylinder when leakage or seal wear requires service. Buyers should identify the cylinder reference and...