Product Description 126-1876 is an aftermarket replacement cushion seal ring for selected Caterpillar hydraulic cylinder assemblies. It is an individual steel seal component, not a complete cylinder repair kit or a conventional O-ring. Reference dimensions are 95 mm OD × 89 mm ID × 6 mm axial height. Published cylinder-kit...

Product Description2129-6013BKT is an aftermarket track adjuster seal-kit reference listed for selected Doosan DX80R, DX85R-3 and Solar 75-V applications. The repair position is the track tensioning assembly, so it should not be confused with a travel motor kit used on similar compact excavators. Verify the adjuster identification and original service...

Product Description 244-2067 is an aftermarket ripper lift cylinder seal kit for selected Caterpillar D8-series track-type tractors. It services the hydraulic cylinder that raises and lowers the rear ripper assembly, not the ripper tilt or pitch cylinders. A published D8R major-components catalogue identifies 244-2067 for ripper lift cylinder group 155-3653;...

Product Description79083792 is an aftermarket lift-cylinder seal-kit reference for the Fiat-Allis FR11 wheel loader. The lift cylinders raise and lower the loader arms, so this application should be separated from bucket-dump and steering repairs. Match the installed cylinder and machine serial details before ordering, as older loaders may have replacement...

Product Description3D8417 is an aftermarket rotating-shaft lip seal referenced for selected Caterpillar wheel loaders. The original reference is also formatted 3D-8417. It identifies a separate sealing component rather than a complete axle or transmission kit. Check the shaft interface and housing arrangement before ordering, because a loader uses several lip...

Product Description2160273 is an aftermarket rotating-shaft lip seal referenced across selected Caterpillar loaders, tractors and underground trucks. This listing keeps it separate from 9X7720, which is a different seal reference, rather than treating a group of numbers as interchangeable. Confirm the installed shaft and housing arrangement before ordering. Ruijueparts can...

Product Description AH173410 is an aftermarket 80 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies AH173410 as a hydraulic cylinder piston, rather than a complete rod-and-bore seal kit. It is the piston-side assembly that provides sealing within compatible 80 mm bore cylinders. Published dimensions list a 30.58...

Product DescriptionXP00000081PS is an aftermarket hydraulic cylinder seal-kit reference listed for Hitachi ZX250LC-series service. The available reference does not separate every boom, arm and bucket configuration, so the cylinder number must be checked before selecting a position. Do not treat the adjacent XP00000083PS number as an automatic substitute. Ruijueparts can...

Product DescriptionFor bucket leakage on older Volvo / Samsung MX3-family excavators, match both the cylinder position and kit number. 813-000150 is an aftermarket bucket cylinder seal kit, also catalogued as 8130-00150, for Volvo / Samsung MX3, MX3W and MX3W-2 reference applications. Confirm the cylinder identification and machine serial number before...

Product Description 12470612 is an aftermarket rod bearing seal kit for a Liebherr excavator arm/stick hydraulic cylinder. It is a rod-side cylinder service kit, not a generic complete cylinder kit and not the piston sealing set. Published cylinder-group data pairs 12470612 with arm/stick cylinder 94020194 on Liebherr 954–960 series machines...

Product Description 471-0276 is an aftermarket hydraulic steering cylinder seal kit for selected Caterpillar wheel loaders. It is cross-referenced to steering cylinder 395-0387, with a 55 mm rod and 95 mm bore. This cylinder operates the machine steering system and is not used for lift, bucket, or tilt functions. Caterpillar...

Product DescriptionXP00000083PS identifies an aftermarket hydraulic cylinder seal kit in Hitachi ZX250LC-series replacement listings. Selecting by machine size alone can lead to the wrong gland or piston seals; the installed cylinder is the deciding reference. This page does not claim that one kit fits all boom, arm and bucket cylinders....

Product Description 5422490 is an aftermarket hydraulic cylinder seal kit reference for MST M542 and M544 backhoe loaders. Published parts catalogs list this number for both the telescopic dipper cylinder and the stabilizer cylinder, so the installed cylinder group must be confirmed before ordering. It is not a universal boom...

Product Description AH212101 is an aftermarket 100 mm hydraulic cylinder bore seal kit reference for selected John Deere equipment. Official John Deere data identifies it as a hydraulic cylinder kit with a 100 mm bore and lists AHC19515 as a substitute reference. The kit is intended for the piston and...

Product Description2450596 is an aftermarket hydraulic cylinder seal kit referenced for selected Caterpillar D9 tractors and the 854K wheel dozer. The machine listing is not a guarantee for every cylinder position, so compare the installed cylinder group and original kit number before purchase. This is a sealing repair item rather...

Product Description721-98-04190 is an aftermarket bucket cylinder seal kit referenced in replacement catalogues for the Komatsu PC210-10. Its application is the cylinder that curls and dumps the bucket, which uses a different service kit from the boom or arm cylinder. Confirm the installed cylinder reference and machine serial number before...

Product DescriptionVOE11988358 is an aftermarket boom cylinder seal kit with reference applications on Volvo EC25 and ECR28 compact excavators. The boom cylinder raises and lowers the main digging boom; the dipper, bucket and blade have separate service requirements. ECR28 parts literature identifies the kit in the boom-cylinder group, while EC25...

Product Description 86507789 is an aftermarket steering control unit seal kit matched 1:1 to the current CNH original reference. It replaces legacy part number 1343658C3, allowing distributors to serve both current and older part-number searches with one product listing. This kit is for the hydraulic steering hand pump, Orbitrol, or...

Product Description 4P-9943 is an aftermarket EPDM rubber radiator end-tank seal for selected Caterpillar cooling-system assemblies. Also identified as a radiator fan-side end-tank seal, this 121 mm × 140 mm × 22.5 mm component is used during radiator service to seal the designated end-tank connection. It is not a hydraulic...

Product Description 10X3211 is an aftermarket slew cylinder seal kit for the 55 mm rod version of the Terex Vectra TX740 backhoe loader swing cylinder, commonly referenced as SSP8020. A slew or swing cylinder moves the rear excavator assembly left and right; it is not a boom, dipper, or stabilizer...

Product Description 246-0655 is an aftermarket blade lift cylinder seal kit for selected Caterpillar crawler and wheel dozers. It services the hydraulic cylinders that raise and lower the blade, rather than the blade tilt or ripper system. Caterpillar lists D11N, D11R, and 854G as compatible models; published seal-kit catalogues also...

Product Description 86570919 is an aftermarket replacement bucket cylinder seal kit matched 1:1 to the original New Holland repair kit reference. It is used for the bucket/tilt cylinder application on selected New Holland skid steer loaders, including cylinder references 86633433 and 87038978. For distributors, this is a part-number-led SKU: submit...

Product Description Aftermarket 7135547 hydraulic cylinder seal kit for compatible Bobcat skid steer loaders, track loaders, and mini excavators. This kit is commonly referenced for tilt cylinder repair and may also service other hydraulic cylinders depending on machine model and cylinder number. It replaces earlier reference number 6530345 and is...

Product Description 4660824 is an aftermarket hydraulic cylinder seal kit for selected Hitachi mining excavators. Cross-checked catalogue records place it in EX1800-3 boom-cylinder and EX3600 arm/stick-cylinder applications. On EX3600 front-shovel/loader arrangements, “loader” describes the excavator attachment, not a wheel loader. A 220 mm rod × 300 mm bore reference is...