Product Description This aftermarket 991/00061 loader lift cylinder seal kit is referenced for selected JCB backhoe loader lift rams with a 50 mm piston rod and 80 mm cylinder bore. It is commonly listed for later serial applications from M320000 onward, making serial-number verification essential when distinguishing it from earlier...

Product Description AH219633K is an aftermarket complete seal kit for verified backhoe dipper crowd cylinders associated with John Deere AH219633. The crowd cylinder moves the rear dipper arm in and out during digging; it differs from the main boom and extendable dipper cylinders. Published references identify a 63 mm rod...

Product Description904/09400 is an aftermarket piston seal for matching JCB Hydra Clamp applications on 3CX and 4CX backhoe loaders. This is an individual clamp seal, not a complete boom, bucket or stabilizer cylinder repair kit. Check the clamp assembly reference and the removed seal profile before purchase, as other clamp...

Product Description241-1397 is an aftermarket transmission gasket-kit reference for Caterpillar 980C and 980F wheel-loader applications. It supports sealing work when the matched transmission is opened for service; it is not a replacement transmission or a set of drive gears. Verify the transmission arrangement and machine serial details before ordering. Ruijueparts...

Product Description AH212585 is an aftermarket 110 mm hydraulic-cylinder piston/bore seal kit for John Deere equipment. It is a bore-side kit with a four-piece capped T-seal; data lists no rod seal or wiper. John Deere lists AHC20489 as its substitute bore-seal kit. References place AH212585 in specific backhoe boom, crowd,...

Product DescriptionU6049662 is an aftermarket cylinder seal kit supplied by Ruijueparts. The official New Holland Construction catalogue identifies U6049662 as a seal kit with multiple sealing and guide components. The public listing does not establish one universal model or cylinder position. Send the cylinder number for a fit check before...

Product Description180-00198 is an aftermarket rod seal referenced for Doosan equipment. It is an individual sealing component, so it should not be ordered as a complete hydraulic cylinder repair kit. Confirm the original reference and the assembly being serviced, then compare the seal profile and dimensions before installation. Ruijueparts offers...

Product DescriptionWhen servicing a bearing retention arrangement, use the complete 2P4471 reference rather than selecting a ring by appearance. Catalogued as 2P-4471, this aftermarket bearing nut lock is mechanical hardware for matching Caterpillar assemblies. It is not an O-ring or a hydraulic seal kit. Verify the mating nut and locating...

Product DescriptionGG190-32388 is an aftermarket cylinder seal kit supplied by Ruijueparts. John Deere skid-steer references include 60, 70 and 90 lift/tilt applications; catalogue assembly examples include GG170-32599 and GG170-38876 on model 90. Older skid steers have serial-dependent cylinders. Compare the assembly and the 1 inch rod / 2 inch bore...

Product Description2K0715 is an aftermarket axle-housing thrust washer, also written 2K-0715. Its purpose is mechanical axial support rather than fluid sealing, so it should not be purchased as an oil seal. Match the washer position, mating components and original reference when servicing the axle. The catalogue covers several loader and...

Product Description AH205062 is an aftermarket 100 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies it as a hydraulic cylinder piston, not a complete seal kit. This piston-side assembly incorporates sealing and bearing elements for cylinders built around its specific piston geometry. Published reference dimensions include a...

Product Description 17M-15-05110 is an aftermarket transmission service kit matched 1:1 to the original Komatsu repair kit reference. It is used for transmission service on specified D275A-5 and D275AX-5 crawler dozer configurations. This product belongs to the transmission assembly, while 17M-13-05040 is a separate torque converter service-kit reference; the two...

Product Description 5422090 is an aftermarket front boom lift cylinder seal kit reference for MST backhoe loaders. Catalogues identify it for the loader boom lift hydraulic cylinder on MST M542/M544 families, rather than the rear excavator boom, bucket cylinder, or steering system. This matters because front-loader and rear-backhoe cylinders can...

Product DescriptionFor a leaking stabilizer on a Volvo BL61B or BL71B backhoe loader, VOE15185168 is an aftermarket cylinder sealing-kit reference to check. Stabilizer cylinders lower and raise the support legs used during backhoe work; their seals should not be confused with the rear boom or bucket kits. Confirm the installed...

Product Description 195-13-05230 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair-kit reference. It is used for torque converter maintenance on the D375A-6 crawler dozer powertrain. The torque converter transfers engine power into the transmission system, so this kit should be identified by its exact...

Product Description This aftermarket 428-33-11480 brake seal is referenced for selected Komatsu WA700 wheel loader wet brake assemblies. It is an individual internal brake sealing component installed with the brake piston arrangement; it is not a hydraulic cylinder seal kit, floating seal assembly, or complete brake repair kit. On WA700...

Product Description AH173410 is an aftermarket 80 mm unitized hydraulic-cylinder piston for verified John Deere applications. Deere identifies AH173410 as a hydraulic cylinder piston, rather than a complete rod-and-bore seal kit. It is the piston-side assembly that provides sealing within compatible 80 mm bore cylinders. Published dimensions list a 30.58...

Get a customized device model matching solution now.Fits equipment: 3D 214 1400 1400B 1700B SITEMASTER Condition: New – Open box: A new, unused item Brand: JCB replacement

Product Description 287-33-11261 is an aftermarket wheel brake seal referenced for the Komatsu WS23S-2A motor scraper, S/N 3101-Up. The parts catalogue identifies it as one of several individual components included in brake service kit 287-33-05013. It should be ordered by its exact part number, not as a substitute for 287-33-11271...

Product Overview The 71470760 hydraulic seal kit is a reliable aftermarket replacement for CASE machinery. Designed for hydraulic cylinders and lift applications, it includes rod seals, piston seals, backup rings, and O-rings to restore sealing performance and prevent fluid leakage. It is suitable for servicing lift hydraulic cylinders used in...

Product Description 86570919 is an aftermarket replacement bucket cylinder seal kit matched 1:1 to the original New Holland repair kit reference. It is used for the bucket/tilt cylinder application on selected New Holland skid steer loaders, including cylinder references 86633433 and 87038978. For distributors, this is a part-number-led SKU: submit...

Product Description85819350 is an aftermarket dipper cylinder seal kit supplied by Ruijueparts. A documented CASE 590SR Super R application is dipper cylinder 85820244. The replacement catalogue identifies a 63 mm rod and 4.5 inch bore. Later cylinder 87412696 is listed with a different kit; match the cylinder number rather than...

Product Description114-4850 is an aftermarket hoe-stick lip-type seal identified by its complete Caterpillar reference. This is a linkage sealing component, so a buyer should check the joint location rather than assume it is a hydraulic cylinder repair kit. Similar-looking pin seals can have different profiles and seating dimensions. Ruijueparts can...