Product Description87715379 is an aftermarket axle oil seal supplied by Ruijueparts. Wheel loader axle references include CASE 721E and 821E and New Holland W170B and W190B. The dealer catalogue replaces earlier seal 8500058 with 87715379. Check the installed axle and shaft sealing surface, rather than selecting a hydraulic cylinder kit....

Product Description2401-9228KT is an aftermarket travel motor seal kit listed for Doosan Solar 450LC applications. It should be matched to the installed drive motor rather than selected from an unrelated Solar model family. Check the motor identification, original repair reference and machine serial number before purchase, particularly on equipment with...

Product DescriptionVOE14609486 is an aftermarket main control valve seal kit referenced for Volvo EC460B, EC460C and EC480D excavator applications, including listed HR variants. It concerns valve sealing, not the hydraulic cylinders that move the digging equipment. Related listings also show VOE14609485, but shared model coverage does not establish that the...

Product Description 8T-1374 is an aftermarket hydraulic cylinder seal kit for selected older Caterpillar equipment using a 2.50 in rod and 5.50 in bore reference. It is a dimensional and cylinder-group kit, not a kit dedicated to only one machine function. Published catalogues reference it for ripper cylinders on D4D,...

Product DescriptionVOE14506889 is an aftermarket centre swivel joint seal kit referenced for selected Volvo excavators, including EC140, EC210 and EC240 families. The swivel transfers hydraulic oil between the rotating upper structure and undercarriage; it is not the swing motor that turns the machine. Check the installed joint and machine serial...

Product DescriptionMMV80780 is an aftermarket arm cylinder seal kit for matching CASE excavator applications. Parts listings identify it in arm or dipper cylinder groups, including CX240BLR, CX250C long-reach and CX300C references. Match the cylinder assembly and serial-specific diagram before ordering; a model name alone does not establish fit. Ruijueparts offers...

Product Description 331/39047 is an aftermarket replacement dipper cylinder seal kit for selected JCB crawler excavators. It is designed to service the arm/dipper hydraulic cylinder, helping technicians renew worn sealing components during cylinder repair. Published repair-kit data identifies a 95 mm rod and 130 mm bore configuration and associates the...

Product Description 6816534 is an aftermarket hydraulic arm cylinder seal kit for selected Bobcat compact excavators and is superseded by reference 7135538. On older 320 and 320D excavators, it is associated with arm cylinder 6810414. The later 7135538 reference also appears in specified arm or bucket cylinder applications across additional...

Product Description4649751 is an aftermarket bucket-cylinder seal kit for matched Hitachi excavator applications. It is intended for the cylinder that curls and uncurls the bucket, so it should be checked separately from an arm or boom repair kit on the same machine. Confirm the installed cylinder and serial configuration before...

Product Description 238-4462 is an aftermarket hydraulic cylinder seal kit for selected Caterpillar equipment with a 2 in rod and 3 in bore reference. It is not limited to one cylinder function: published references associate this kit with motor grader blade lift and centershift cylinders, plus selected articulated-truck hydraulic cylinder...

Product Description The aftermarket 195-22-05030 service kit is referenced for the transmission control and steering-related service system of verified Komatsu D375A-6 track-type tractors. It should be treated as a control service kit, rather than a hydraulic cylinder repair kit or a full transmission overhaul gasket set. This distinction matters when...

Product Description12207345 is an aftermarket piston seal kit listed for tilt cylinder 11692550 in the Liebherr R920 parts catalogue. This cylinder controls bucket movement, so buyers should distinguish it from the boom and stick cylinders. The piston kit and rod-side kit are separate catalogue entries. Check the cylinder number and...

Product DescriptionVOE14565931 is an aftermarket main control valve seal kit for selected Volvo excavator applications. It concerns the valve assembly that directs hydraulic flow, rather than the seals inside a boom, arm or bucket cylinder. Published replacement references include EC250D and EC300D, but the installed valve identification remains essential for...

Product Description GH-1 is an aftermarket hydraulic breaker seal kit for a verified NPK GH-1 hydraulic hammer. It supports replacement of applicable internal sealing elements during routine maintenance, hydraulic-leak diagnosis, or breaker overhaul. NPK GH-1 is commonly listed for an approximately 2.5–4.5 ton carrier class with a 57 mm tool...

Product Description85999136 is an aftermarket control valve lip seal supplied by Ruijueparts. New Holland loader-backhoe control-valve diagrams list this lip seal, with reference dimensions 17.6 mm ID, 26.84 mm OD and 5.42 mm thickness. One catalogue revision introduces this seal from September 1995; check the valve revision before replacing an...

Product Description 281-8870 is an aftermarket replacement transmission gasket kit for selected Caterpillar motor graders and a CS-583C vibratory compactor. It is intended for transmission overhaul work, helping technicians renew the gaskets, seals, and O-rings used across applicable transmission assemblies. This is not a hydraulic cylinder seal kit; correct identification...

Product Description 287-33-11261 is an aftermarket wheel brake seal referenced for the Komatsu WS23S-2A motor scraper, S/N 3101-Up. The parts catalogue identifies it as one of several individual components included in brake service kit 287-33-05013. It should be ordered by its exact part number, not as a substitute for 287-33-11271...

Product Description 332-5669 is an aftermarket solenoid valve seal kit reference for compatible Caterpillar equipment. Official data identifies backup rings and O-rings in NBR/HNBR/XNBR rubber and PTFE for servicing solenoid valve group components. It seals hydraulic valve interfaces, not a cylinder, pump, or motor overhaul. One machine may contain several...

Product Description 3484453M94 is an aftermarket center-mount stabilizer cylinder seal kit for the rear backhoe assembly. It is referenced for Terex cylinder 3622612M91, with an 89 mm bore and 57.15 mm rod. The stabilizer cylinder deploys the machine’s center-mounted support leg to steady the backhoe while it digs; it is...

Product Description 707-99-64210 is an aftermarket ripper tilt cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It is used on the rear ripper tilt cylinder—not the blade tilt cylinder—of the specified D275A-5 crawler dozer cold-climate configuration. The kit is associated with cylinder references 707-01-0C190 and 707-01-0C200,...

Product Description 17M-13-05040 is an aftermarket torque converter service kit matched 1:1 to the original Komatsu repair kit reference. It is designed for service work on the torque converter assembly in a specified D275A-5D crawler dozer configuration. The torque converter transfers engine power through the powertrain, so its sealing components...

Product Description 61281-000 is an aftermarket replacement shaft seal kit for selected Danfoss Char-Lynn 4000 Series hydraulic motors with a -006 design level. It is intended for servicing the motor’s shaft-end sealing area when leakage is found around the output shaft. Before ordering, confirm the complete motor model code and...

Product Description267-8985 is an aftermarket O-ring referenced for the steering axle on selected Caterpillar wheeled excavators. It is an individual sealing component rather than a full axle repair kit. The nearby 267-8984 reference describes another ring, so verify the exact groove and original number before ordering. Ruijueparts can assist with...

Product Description267-8984 is an aftermarket O-ring referenced for Caterpillar wheeled-excavator axle sealing. It is distinct from 267-8985, which appears in related assemblies but has a different reference specification. Check the axle diagram and exact groove before purchase instead of treating the pair as interchangeable. Ruijueparts can review a list of...