Product Description 308-1838 is an aftermarket hydraulic manifold relief-valve seal kit reference for compatible Caterpillar equipment. Official data identifies O-rings and split back-up rings for servicing the manifold relief valve group. It is a control valve kit, not a hydraulic cylinder, travel motor, or transmission repair kit. The same machine...

Product Description For a skid steer with a leaking hydrostatic drive motor or a piston motor scheduled for overhaul, 280-7849 is an aftermarket seal kit reference used within the compatible piston motor assembly. The official reference identifies sealing and service items, including a dust seal, shaft seal, O-rings, piston seal...

Product Description 707-99-71440 is an aftermarket ripper lift cylinder seal kit matched 1:1 to the original Komatsu repair kit reference. It is used on the D355A-3 crawler dozer ripper lift cylinder, which raises and lowers the rear ripper assembly during ground-breaking work. The referenced cylinder configuration uses a 90 mm...

Product Description 86507789 is an aftermarket steering control unit seal kit matched 1:1 to the current CNH original reference. It replaces legacy part number 1343658C3, allowing distributors to serve both current and older part-number searches with one product listing. This kit is for the hydraulic steering hand pump, Orbitrol, or...

Product Description 10X3211 is an aftermarket slew cylinder seal kit for the 55 mm rod version of the Terex Vectra TX740 backhoe loader swing cylinder, commonly referenced as SSP8020. A slew or swing cylinder moves the rear excavator assembly left and right; it is not a boom, dipper, or stabilizer...

Product Description9599621 is an aftermarket hydraulic-cylinder piston seal kit with reference applications across several Liebherr mining-excavator configurations. The important distinction is the cylinder assembly: a shared piston-kit number does not mean the corresponding rod kits are interchangeable. Use the application references below as a starting point, then check the installed...

Product Description Stop hydraulic fluid leaks and restore the lifting efficiency of your legacy fleet with the VOE11000107 attachment cylinder seal kit. Specifically designed as a high-durability aftermarket replacement for Volvo 4600B machinery, this kit is engineered to withstand intense pressure and tough working conditions. At Ruijueparts, we understand how...

Product Description YW181-95222 is an aftermarket dozer blade cylinder seal kit for selected Kubota compact excavators, including U15, KX41-3, and U17 applications. It reseals the hydraulic cylinder that raises and lowers the front grading blade; it is not a boom, dipper/arm, or bucket cylinder kit. For buyers working from older...

Product Description TH111627 is an aftermarket hydraulic seal kit for the dipper stick/arm cylinder on selected John Deere 892D and 892D LC excavators. Published fitment data identifies a 110 mm rod and 165 mm bore for cylinder references AT131416 and TH111616, prior to serial number 703549. The dipper cylinder controls...

Product Description MT36519 is an aftermarket replacement hydraulic breaker seal kit reference for verified Montabert BRH125 hydraulic hammers. Independent breaker-parts catalogues identify MT36519 for BRH125 service, while 46294 is also used as a legacy cross-reference in some markets. The kit is intended for replacing applicable internal sealing components during planned...

Product Description 6803281 is an aftermarket hydraulic cylinder seal kit referenced primarily as a blade cylinder kit for Bobcat compact excavators 220, 320, and 322. On selected X-320 excavator configurations, the same part-number reference is also associated with specific boom or arm cylinder applications; cylinder position depends on the machine...

Product Description Restore full dynamic force and eliminate high-pressure fluid leaks with this premium aftermarket 69000801 hydraulic bucket cylinder seal kit, engineered specifically for JCB JS200 and JS220 20-22 ton tracked excavators. This comprehensive ram rebuild kit features heavy-duty rod seals, dynamic piston seals, wear rings, and high-elasticity O-rings optimized...

Product Description High-quality 85800007 hydraulic back-up ring replacement for CNH equipment. This precision-engineered seal (121.16mm x 126.64mm x 1.27mm) prevents O-ring extrusion in high-pressure backhoe swing cylinders. Ideal for Case B90B, B95B, and B110B models. Durable aftermarket solution to reduce downtime and maintain hydraulic efficiency. Item specifics Part Number: 85800007...

Product Description 6589807 is an aftermarket arm cylinder seal kit referenced for Bobcat X320 and 320 compact excavators. It is used to rebuild the arm cylinder that controls dipper movement during digging and material handling. The kit is associated with cylinder references 6589582 and 6803040 on specified serial-number ranges. Its...

Product Description This aftermarket hydraulic breaker seal kit is for verified Atlas Copco / Epiroc C140 hydraulic hammer repair applications. C140 is a hydraulic breaker model, not a carrier excavator model or hydraulic cylinder reference. The kit is intended for replacing applicable internal sealing components during planned hammer overhaul, leakage...

Product Description The 416-1228 aftermarket tilt cylinder seal kit is referenced for Caterpillar-compatible 992K wheel loader hydraulic cylinder service. It is a standard-size kit intended for a cylinder bore within the applicable nominal service limit; the OEM reference states a maximum 0.25 mm (0.010 in) bore sizing condition. The reference...

Product Description Keep your motor grader performing at peak efficiency with the 707-99-25270 Blade Shift Cylinder Seal Kit. Specifically engineered for aftermarket excellence, this kit is designed to handle the high-pressure demands and constant shock loads associated with blade lateral movement. Each component—from the reinforced piston seals to the precision-fit...

Product Description The aftermarket 721-98-00600 steering cylinder seal kit is referenced for verified Komatsu HD785-7 off-highway dump truck steering-cylinder service. It supports seal replacement when cylinder leakage or internal sealing wear is found during heavy-duty truck maintenance. This part should be identified by the part number and the installed steering...

Product Description 86627882 is an aftermarket replacement hydraulic breaker seal kit for the Montabert SC12 hydraulic rock breaker. It is intended for resealing confirmed internal breaker service positions during overhaul, including maintenance after hydraulic oil leakage, pressure loss, or planned breaker dismantling. The SC12 is a compact breaker commonly matched...

Product Description 6803334 is an aftermarket tilt cylinder seal kit referenced for selected Bobcat skid-steer and mini track loaders. It services the hydraulic cylinder that rolls the bucket or attachment forward and back, helping restore controlled tilt movement when seal wear causes leakage or pressure loss. This reference is commonly...

Product Description Aftermarket 84154316 dipper / crowd cylinder seal kit for Case backhoe loaders and selected crawler dozers or loaders using 5.00 in. bore and 2.50 in. rod hydraulic cylinders. This kit is used to rebuild worn or leaking hydraulic cylinders, helping retain oil pressure, reduce external leakage, and restore...

Product Description 375-1287 is an aftermarket steering cylinder seal kit for selected Caterpillar wheeled excavators and material-handling equipment. This reference is intended for steering-cylinder service, helping repair teams renew sealing components when diagnosing external leakage or pressure loss at the steering cylinder. It should not be selected as a general...

Product Description AH149810 is an aftermarket steering-cylinder seal kit for John Deere backhoe loaders and motor graders. Examples include a 210LE steering cylinder AH216821 and a 570B front-steering cylinder AH150023; the rod reference is 25 mm. On some backhoes, fitment is limited to non-MFWD machines or a specified rod guide:...

Product Description SB131 U641 is an aftermarket hydraulic breaker seal kit reference for selected Soosan SB131 hydraulic breakers. The U641 designation is commonly used in aftermarket seal catalogues to identify a heat-resistant polyurethane seal specification for breaker service. This kit is intended to renew compatible internal sealing positions during hydraulic...