Product Description231-6843 is an aftermarket hydraulic cylinder seal ring for selected Caterpillar equipment applications. This component number must be distinguished from 231-6844, which identifies a cylinder seal kit. For a workshop order, establish whether the job needs one replacement component or a wider reseal set, then check the installed cylinder...

Product Description 998/10784 is an aftermarket steering cylinder seal kit for selected JCB Loadall telehandler applications. A JCB telehandler parts catalogue cross-references this number with 45/807-4 and identifies its service position as the steering cylinder. The steering ram directs hydraulic force to the axle linkage to turn the machine, so...

Product Description AHC13362 is an aftermarket 63 mm hydraulic cylinder rod seal kit for John Deere equipment. It seals the rod and gland end, not the piston-side bore. It is used on selected backhoe loaders, wheel loaders, crawler dozers, forestry machines, and tractors. Cross-reference data associates it with AH149815, including...

Product Description 6803472 is an aftermarket hydraulic cylinder seal kit referenced for selected older Bobcat compact loaders and skid-steer loaders. It is a 1-in. rod × 2-in. bore cylinder repair kit. Its installation position varies by machine: it is referenced for lift-cylinder service on some models and tilt-cylinder service on...

Product Description 049944 is an aftermarket steering cylinder seal kit reference for Carraro axle applications. Technical diagrams place it in the axle-steering-cylinder assembly and associate it with steering cylinder reference 147241. It is listed for MST M542 and M544 backhoe loaders and may be used on other equipment only where...

Product Description6P1735 is an aftermarket bearing nut lock washer for Caterpillar reference applications in drivetrain service. The original reference is written 6P-1735 in the parts catalogue. A correct repair depends on the specified nut-lock arrangement, not just a ring that fits over the shaft. Check the tab geometry and assembly...

Product DescriptionThis aftermarket complete seal kit is offered for the PS01V00001F1 boom cylinder assembly used in CASE CX55B reference applications. PS01V00001F1 identifies the cylinder assembly, not an original seal-kit number. The distinction helps buyers separate a resealing order from a complete-cylinder purchase. Match the installed cylinder and compare the required...

Product Description 7137869 is an aftermarket hydraulic lift cylinder seal kit for Bobcat S630 skid-steer loaders and T630 compact track loaders. It rebuilds the designated loader lift cylinder that raises and lowers the loader arms during loading, lifting, and attachment work. The reference is associated with cylinder numbers 7256566 and...

Product DescriptionT42302 is an aftermarket o-ring supplied by Ruijueparts. Tractor references include John Deere 6R 110 and 6R 120; the original reference lists 101.27 mm inside diameter and approximately 2.62 mm section. This is an individual O-ring reference, not a complete cylinder repair kit. Match the groove and service number...

Product Description RG158-67680 is an aftermarket hydraulic cylinder seal kit referenced for Kubota KX018-4 and KX019-4 compact excavators. The same reference is catalogued for designated arm and bucket cylinder applications, so it should not be presented as a universal kit for every cylinder on either machine. A 35 mm rod...

Product Description RG638-67540 is an aftermarket boom cylinder seal kit referenced for selected Kubota compact excavator variants, including KX101-3 Alpha and U35-3 Alpha applications. Catalogue data identifies it as a boom-cylinder kit with a 45 mm rod and 85 mm bore reference. It must not be marketed as a dipper/arm...

Product DescriptionVOE17238415 is an aftermarket tilt cylinder seal kit referenced for Volvo L180G and L180H wheel loaders. The tilt mechanism changes bucket angle during loading and dumping, while the lift cylinders raise the arms. Cylinder references include 17230577 and 17230578; L180G listings also identify 15086745 and 15131243. Check the assembly...

Product Description 234-15-07012 is an aftermarket transmission service kit matched 1:1 to the original Komatsu service-kit reference. It is used for powertrain service on selected Komatsu motor graders, including specified GD705A-4, GD705A-4A, GD705A-4A-N, and GH320-2 applications. This product should be identified by its original kit number during transmission repair because...

Product Description AH149814 is a legacy 56 mm hydraulic cylinder rod seal kit reference for John Deere equipment. John Deere lists AHC13278 as its substitute, followed by AHC16683. For older machines, retain AH149814 in RFQs but verify the current replacement against the cylinder assembly. This rod/gland kit appears in boom,...

Product Description RH418-71590 is an aftermarket bucket cylinder seal kit for Kubota U27-4 compact excavators, with U27-4CA included in aftermarket application references. This repair kit reference is associated with the bucket cylinder and a 40 mm rod × 65 mm bore. The bucket cylinder controls attachment curl and dump movement,...

Product Description 10X1700 is an aftermarket bucket cylinder seal kit for selected Terex backhoe loader excavator-side bucket cylinder applications. Parts catalog references identify it for the Terex TLB 825 bucket cylinder, while TLB 740S and TLB 844S catalogues associate it with specified production ranges. It is also commonly cross-referenced as...

Product Description Aftermarket 86509056 hydraulic cylinder seal kit for New Holland skid steer loader cylinder repair applications. This kit is commonly used to rebuild bucket tilt or boom lift cylinders on L781, L783, and L785 skid steer loaders with 2.25 in bore and 1.125 in rod hydraulic cylinders. It helps...

Product Description1217637, also written 121-7637, is an aftermarket backup ring referenced for the rear axle of selected Caterpillar wheeled excavators. It is a separate part of the sealing arrangement, not an alternative name for seal ring 121-7639. Keep both references distinct when preparing an axle repair order. Ruijueparts can help...

Product Description2401-9165KT is an aftermarket main pump seal-kit reference covering pump body and regulator sealing. Supplier application tables include Solar 400-V and Solar 450-V configurations, but the fitted pump remains the deciding match. Confirm the pump identification and required sealing components before disassembly or purchase. Ruijueparts supports part-number enquiries for...

Product Description This aftermarket 991/00061 loader lift cylinder seal kit is referenced for selected JCB backhoe loader lift rams with a 50 mm piston rod and 80 mm cylinder bore. It is commonly listed for later serial applications from M320000 onward, making serial-number verification essential when distinguishing it from earlier...

Product Description 160-6386, 9Y-1655, and 8N-7139 are cross-reference numbers for an aftermarket radiator core and end-tank seal used in selected Caterpillar cooling-system assemblies. Made for radiator service work, this EPDM rubber seal reference helps buyers identify the correct component when rebuilding folded-core radiator sections or addressing leakage around radiator tank...

Product DescriptionVOE14589130 is an aftermarket boom cylinder seal kit referenced for selected Volvo EC240C excavators. Catalogue entries identify cylinders 14551713 and 14551718 with a 105 mm rod and 160 mm bore. Other boom configurations on the same model use different sealing references, so position and machine name must be checked...

Product Description231-0898 is an aftermarket hydraulic cylinder seal kit referenced for selected Caterpillar wheel loaders and the IT24F integrated toolcarrier. Before placing a maintenance order, identify the cylinder being rebuilt and compare its group number with the original kit reference. A loader model can use several cylinder configurations, and a...

Product Description 7197632 is an aftermarket boom cylinder seal kit for selected Bobcat compact excavators. It directly replaces the earlier 7162061 reference in the original parts system. The kit rebuilds the boom cylinder that raises and lowers the excavator boom during digging, lifting, and truck-loading work. Verified cylinder references include...